Operating Instructions Air Conditioner Model No. Indoor Unit CS-E9JKKW-1 CS-E12JKKW-1 CS-E18JKK-1 CS-E22JKK-1 Single Split Outdoor Unit CU-E9JKK-1 CU-E12JKK-1 CU-E18JKK-1 CU-E22JKK-1 Multi Split Outdoor Unit CU-2E18JBK-1 Before operating the unit, read these operating instructions thoroughly and keep them for future reference. QUICK GUIDE © Panasonic HA Air-Conditioning (M) Sdn. Bhd. 2010. Unauthorized copying and distribution is a violation of law.
SAFETY PRECAUTIONS Thank you for purchasing Panasonic Air Conditioner To prevent personal injury, injury to others, or property damage, please comply with the following.
WARNING POWER SUPPLY Do not use modified cord, joint cord, extension cord or unspecified cord to prevent overheating and fire. Do not share the same power outlet with other equipment to prevent overheating and fire. Do not operate with wet hands to prevent electric shock. If the supply cord is damage, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
MULTI AIR CONDITIONER SYSTEM Multi Split Outdoor Unit (CU-2E18JBK-1) DEFINITION Multi air conditioner systems save space by letting you connect multiple indoor units to a single outdoor unit. INDOOR UNIT • It is possible to operate the indoor units individually or simultaneously. The operation mode priority is given to the first unit that turned on. • During operation, heating and cooling mode could not be activated at the same time for different indoor unit.
INDOOR UNIT CAUTION • Switch off the power supply before cleaning. • Do not touch the aluminium fin, sharp parts may cause injury. CLEANING INSTRUCTIONS HINT • Do not use benzene, thinner or scouring powder. • Use only soap ( pH7) or neutral household detergent. • Do not use water hotter than 104°F. • To ensure optimal performance of the unit, cleaning maintenance has to be carried out at regular intervals. Dirty unit may cause a malfunction and you may see error code “H99”.
REMOTE CONTROL 4 TO SELECT FAN SPEED (5 OPTIONS) FAN SPEED • For AUTO, the indoor fan speed is automatically adjusted according to the operation mode. Maximum distances: 26ft 5 TO ADJUST VERTICAL AIRFLOW DIRECTION (5 OPTIONS) AIR SWING INDICATOR (Green) TIMER (Orange) QUIET (Orange) POWERFUL (Orange) POWER • Keeps the room ventilated. • In COOL/DRY mode, if AUTO is set, the louver swing up/down automatically. • In HEAT mode, if AUTO is set, the louver fix at predetermined position.
TO ENJOY QUIET OPERATION TO SET THE TIMER • This operation reduces airflow noise. 8 • To turn ON or OFF the unit at a preset time. TO REACH TEMPERATURE QUICKLY ON • Single Split System: This operation stops automatically after 20 minutes. • Multi Split System: Press the button again or turn OFF the unit to stop this operation. 9 Press and hold for 5 seconds to dim or restore the unit’s indicator brightness.
TROUBLESHOOTING The following symptoms do not indicate malfunction. SYMPTOM CAUSE Mist emerges from indoor unit. Water flowing sound during operation. The room has a peculiar odour. ► • Condensation effect due to cooling process. ► • Refrigerant flow inside the unit. ► • This may be due to damp smell emitted by the wall, carpet, furniture or clothing. ► • This helps to remove the surrounding odours. Indoor fan stops occasionally during automatic fan speed setting.
INFORMATION Information for Users on Collection and Disposal of Old Equipment and used Batteries [Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Pb Note for the battery symbol (bottom two symbol examples): This symbol might be used in combination with a chemical symbol.
MEMO
MEMO
QUICK GUIDE Remote Control Preparation 1 2 3 4 5 6 TIMER ON 1 Pull out 2 Insert AAA or R03 batteries (can be used ~ 1 year) 3 Close the cover 4 Press CLOCK 5 Set time 6 Confirm SET 3 2 OFF CANCEL AC SET CHECK CLOCK 1 AUTO DRY 1 RC RESET MODE HEAT COOL Select the desired mode. AUTO HEAT COOL DRY 2 OFF/ON 2 Start/stop the operation.
