SAP POWER TV/VIDE O T LIG E HT M ASPEC UT DVD AUX DTV CBL RC R VC VR N A TV DB S CH CTIO VOL BBE MENU EXIT VOL CH RECALL PAGE 1 2 4 5 7 8 GUIDE 3 6 9 R-TUNE PROG 0 PIP MIN REW PAUSE FREEZE TV/VCR PIP PLAY STOP PIP CH VCR CH SPLIT MOVE PIP MAX FF REC SEARCH OPEN/CLOSE SWAP Wide Screen TV Operating Instructions Model No. CT-30WX52 CT-34WX52 For assistance, please call : 1-888-VIEW-PTV(843-9788) or send e-mail to : consumerproducts@panasonic.
WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrow-head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.
Important Safety Instructions 1) Read these instructions. All the safety and operating instructions should be read before the appliance is operated. 2) Keep these instructions. The safety and operating instructions should be retained for future reference. 3) Heed all warnings. All warnings on the appliance and in the operating instructions should be adhered to. 4) Follow all instructions. All operating and use instructions should be followed. 5) Do not use this apparatus near water.
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new color television set. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and record the model number and serial number of your set in the space provided on the back cover of these instructions.
Table of Contents Important Safety Instructions ....................................... 3 Installation ...................................................................... 6 Receiver Location ......................................................... 6 Optional External Equipment ........................................ 6 AC Power Supply Cord ................................................. 6 Safety Precaution ..........................................................
Installation Receiver Location This unit is intended to be used with an optional stand or entertainment center. Consult your dealer for available options. Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
Remote Control Battery Installation Requires two AA batteries. 1. Turn the Transmitter face down. Remove top cover by pressing down on marking and sliding cover off in the direction indicated. 2. Install the batteries as shown in the battery compartment. (Polarity + or – must match the markings in the compartment). 3. Replace the cover and slide in reverse until the lock snaps. Two AA size Helpful Hints: For frequent remote control users, replace old batteries with alkaline batteries for longer life.
Cable Connection Connecting the Aerial cable to the RF In Terminal Antenna Connection • For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an outdoor antenna is recommended. Antenna Mode must be set to TV. • Incoming Cable from Home Antenna Connect home antenna to ANT1 connection on back of television. Select TV mode and ANT1 in the SET UP menu. ( Cable Mode is preset at the factory.
Cable Connection Connecting Headphones / Earphones Connect headphones / earphones as follows. INPUT 4 ACTION TV/VIDEO VOLUME CHANNEL HPJ S-VIDEO VIDEO L-AUDIO-R (M3 plug) (Optional) You can listen to sound from the headphone Jack. Optional Equipment Connections Cable Box Connection Follow this diagram when connecting your television to a cable box only.
Cable Connection VCR Connection Follow this diagram when connecting your television to a VCR only. CONNECTIONS ON BACK OF TV Incoming Cable COMPONENT VIDEO INPUT 1 2 1 INPUT 2 3 Y S-VIDEO VIDEO PB PROG OUT ANT1 SPLIT OUT ANT2 PR VIDEO L L R R AUDIO TO AUDIO AMP S-VIDEO ANT INPUT VIDEO Use either the S-Video or the Video connection. L ANT OUTPUT AUDIO R CABLES NOT SUPPLIED VCR Note: The remote control must be programmed with supplied codes to operate the VCR (see page 64, 65).
Cable Connection Viewing a video Procedure • Option A 1. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR. 2. Begin the video. • Option B 1. Select ANT2 in the SET UP menu under Prog Chan. 2. Tune the television to Channel 3 or 4, depending on your VCR. 3. Begin the video. Recording a television program Procedure • Option A (Recording and viewing the same program) 1. Select ANT2 in the SET UP menu under Prog Chan. 2.
Cable Connection VCR and Cable Box Connection Follow this diagram when connecting your television to both a VCR and a cable box. VCR Use either the S-Video or the Video connection.
Cable Connection Recording a premium (scrambled) cable channel Procedure 1. Select ANT2 in the SET UP menu under Prog Chan. 2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR. 3. Turn the VCR ON. 4. Tune the VCR to Channel 3 or 4, depending on the switch setting on the back of VCR. 5. Using your cable box, tune to the premium cable channel you would like to record. 6. Begin recording.
Cable Connection Digital TV - Set-Top Box (DTV-STB) or DVD Connection This television is capable of displaying 1080i and 480p DTV signals when connected to a DTV Tuner set-top-box (STB). In order to view DTV programming, the STB must be connected to the component video inputs (Y, PB , PR ) of the television. A DTV signal must be available in your area. Select the output of the STB to either 1080i or 480p.
Cable Connection Program Out Connection (PROG OUT) To use the television audio and video with optional equipment, connect the PROG OUT and TO AUDIO AMP connections on the back of the television. CONNECTIONS ON BACK OF TV COMPONENT VIDEO INPUT 1 2 1 INPUT 2 3 Y S-VIDEO VIDEO PB PROG OUT ANT1 SPLIT OUT ANT2 MONITOR PR VIDEO L L AUDIO R R VCR OR TO AUDIO AMP Procedure 1. Connect optional equipment to PROG OUT and TO AUDIO AMP terminals. 2.
Location of Controls Illuminated Remote Control Power button Press to turn the TV ON or OFF (See page 18). Note: The TV’s power cord must first be plugged into the wall outlet and then turned on at the POWER switch (standby mode). ASPECT button Change of screen size (See page 46). ZOOM 4:3 FULL JUST MUTE button Press this button to mute the sound, press again to cancel the mute. Mode Selection buttons Selects the operation mode for the remote control.
Location of Controls TV/VIDEO button The input mode changes each time this button is pressed. TV COMPONENT 1 VIDEO 4 COMPONENT 2 VIDEO 3 VIDEO 2 VIDEO 1 SAP button Selects Audio mode (See page 38). STEREO SAP Turning the remote control illumination ON and OFF . MONO R-TUNE Lights the remote control buttons. The selected button blinks when lit. SAP POWER TV/VIDEO RECALL LIG H E UT T DVD AUX DTV CBL RC R VC VR Changes to the next channel up Moves cursor upward during menu mode.
Power ON / OFF Connecting the Plug to the Wall Outlet Note: Main plug types vary between countries. The power plug shown at left may, therefore, not be the type fitted to your set. How to Turn the Power On Press the POWER switch on the TV to turn the set on. POWER-ON: Red When the set is on press the POWER switch on the TV to turn the set off. STANDBY: No light Example: The screen below is displayed for a while after the TV is turned on. (setting condition is an example.
VHF, UHF and CATV INPUT 4 ACTION TV/VIDEO VOLUME CHANNEL HPJ S-VIDEO VIDEO L-AUDIO-R INPUT 4 ACTION TV/VIDEO VOLUME CHANNEL HPJ S-VIDEO VIDEO L-AUDIO-R Operation can be done from the TV set. Channel selectors Volume adjusters Power switch • • Remote control sensor SAP POWER TV/VIDEO LIG H E UT RC VR 1 Press TV AUX DVD R VC to operate the TV set with the remote control. CBL DTV TV T DB TV S CH CTIO VOL EXIT VOL Press to turn the TV on (See page 18).
Roller Guide Menu Navigation Press to display the roller guide menu. CH CTIO N A 1 VOL VOL CH EXIT SET UP Press to rotate to desired icon. Press to display the main menu and submenu field. CH CTIO N A 2 VOL VOL SET UP ENGLISH MODE IDIOMA / LANGUE PROG CHAN CH CC OTHER ADJ. SET UP IDIOMA / LANGUE Press to select main menu feature. PROG CHAN ON MUTE MODE CC CC CC OTHER ADJ. Main menu field Submenu field CH CTIO N A 3 NO OFF VOL SET UP VOL Press to enter submenu field.
Roller Guide Menu Navigation SET UP SET UP ENGLISH MODE IDIOMA / LANGUE IDIOMA / LANGUE PROG CHAN PROG CHAN CC CC OTHER ADJ. SET UP OTHER ADJ. SET UP SET UP IDIOMA / LANGUE PROG CHAN IDIOMA / LANGUE CC CC CC OTHER ADJ. VIDEO ADJ. OTHER ADJ1 OTHER ADJ2 FAVORITES CAPTION CABLE MODE ANT1 ANTENNA AUTO PROGRAM MANUAL PROGRAM ON MUTE MODE PIC MODE STANDARD COLOR TINT BRIGHTNESS PICTURE SHARPNESS NO NORMAL PROG CHAN NO OFF CC OTHER ADJ. VIDEO ADJ.
SET UP Operation SET UP Press to display the roller guide menu. CH CTIO N A 1 VOL VOL CH EXIT SET UP Press to rotate to SET UP. Press to display SET UP. CH CTIO SET UP N A 2 VOL VOL MODE IDIOMA / LANGUE CH ENGLISH PROG CHAN CC Press to select the main menu. OTHER ADJ. Proceed to each adjustment item of the selected main menu. 3 To end Adjustment: EXIT N A Press twice to return to the roller guide. CH CTIO VOL SET UP VOL CH Press to exit roller guide.
SET UP Operation MODE Selection To select either CABLE or TV. In SET UP menu press to select PROG CHAN. CH CTIO N A 1 VOL VOL Press to enter submenu field. SET UP CH IDIOMA / LANGUE PROG CHAN 2 CH CTIO CC OTHER ADJ. Press to select CABLE or TV. N A Press to select MODE. CABLE MODE ANT1 ANTENNA AUTO PROGRAM MANUAL PROGRAM VOL VOL CABLE TV CH ANTENNA Selection To select either ANT1 or ANT2. In SET UP menu press to select PROG CHAN. CH CTIO N A 1 VOL VOL Press to enter submenu field.
SET UP Operation AUTO PROGRAM To automatically program all channels with a signal. In SET UP menu press to select PROG CHAN. CH CTIO N A 1 VOL VOL Press to enter submenu field. SET UP CH IDIOMA / LANGUE Press to select AUTO PROGRAM. 2 PROG CHAN OTHER ADJ. N A CC CH CTIO VOL VOL CABLE MODE ANT1 ANTENNA AUTO PROGRAM MANUAL PROGRAM Press to start AUTO PROGRAM. CH MANUAL PROGRAM To manually add or delete channels. In SET UP menu press to select PROG CHAN.
SET UP Operation AUTO POWER Select SET to power up the TV at the same time as the cable box or other components or select OFF. In SET UP menu press to select OTHER ADJ. CH CTIO N A 1 VOL VOL Press to enter submenu field. SET UP CH IDIOMA / LANGUE PROG CHAN Press to select AUTO POWER. 2 CC Press to select SET or OFF. N A OTHER ADJ.
Closed Captions This receiver has a built in decoder that provides a visual depiction of the audio portion of a television program in the form of written words across the screen (white or colored letters on a black background). It allows the viewer to read the dialogue of a television program or other information. Press to display the roller guide menu. CH CTIO N A 1 VOL VOL EXIT CH SET UP Press to rotate to SET UP. Press to display SET UP.
Closed Captions cc MODE Activates the On-Screen Closed Caption feature. When activated this feature will remain on until OFF is selected in this menu. CH CTIO Press to select from the following: N A In the submenu field press to select cc MODE. VOL SET UP VOL OFF C1 C2 T1 IDIOMA / LANGUE T2 CH T4 T3 C4 PROG CHAN C3 CC CC CC OTHER ADJ. ON MUTE MODE NO OFF • CAPTION OFF - Recommended mode when Closed Caption is not being used.
Geomagnetic correction (Adjusting skewing of images) GEOMAGNETIC CORR (CORRECTION) adjusts to erase the discoloration of the picture due to earth’s magnetic field in the area. This correction is made when moving the TV set or when image is slightly skewed. Press to display the roller guide menu. CH CTIO N A 1 VOL VOL CH EXIT SET UP Press to rotate to SET UP. Press to display SET UP. CH CTIO SET UP N A 2 VOL VOL IDIOMA / LANGUE CH PROG CHAN CC Press to select OTHER ADJ. OTHER ADJ.
PICTURE Adjustment 1 Press to display the roller guide menu. A N CH CTIO VOL SET UP VOL CH EXIT Press to rotate to PICTURE. 2 Press to display PICTURE menu. A N CH CTIO VOL VOL VIDEO ADJ. OTHER ADJ1 OTHER ADJ2 CH Press to select the main menu. VIDEO ADJ. OTHER ADJ1. OTHER ADJ2. PIC MODE STANDARD COLOR TINT BRIGHTNESS PICTURE SHARPNESS NO NORMAL Proceed to each adjustment item of the selected main menu. To end Adjustment: SET UP Press twice to return to the roller guide.
PICTURE Adjustment COLOR / TINT / BRIGHTNESS / PICTURE / SHARPNESS / NORMAL In PICTURE menu press to select VIDEO ADJ.. CH CTIO N A 1 VOL VOL Press to enter submenu field. VIDEO ADJ. OTHER ADJ1 OTHER ADJ2 CH In VIDEO ADJ. submenu field press to select each submenu (COLOR / TINT / BRIGHTNESS / PICTURE / SHARPNESS / NORMAL). CH CTIO N A 2 VOL VOL CH Press to adjust the desired level by looking at the picture behind the menu. Item 30 Function COLOR Adjusts desired color intensity.
PICTURE Adjustment COLOR TEMP (Temperature) / NATURAL COLOR / VIDEO / NR / 3D Y/C FILTER In PICTURE menu press to select OTHER ADJ1. CH CTIO N A 1 VOL VOL Press to enter submenu field. VIDEO ADJ. OTHER ADJ1 OTHER ADJ2 CH In OTHER ADJ1 submenu field press to select each submenu (COLOR TEMP / NATURAL COLOR / VIDEO NR / 3D Y/C FILTER).
PICTURE Adjustment COLOR MATRIX Displays input signals (480p signals) in a natural color from digital equipment adaptors connected to COMPONENT VIDEO INPUT (Y, Pb/Cb ,Pr/Cr input terminals). Select HD or SD to automatically adjust color parameters for HD (high definition) and SD (standard definition). In PICTURE menu press to select OTHER ADJ2. CH CTIO N A 1 VOL VOL Press to enter submenu field. CH In OTHER ADJ2 submenu field press to select COLOR MATRIX. Press to select SD or HD.
PICTURE Adjustment FREEZE Select SPLIT or PIP to determine the frozen picture frame during single screen. In PICTURE menu press to select OTHER ADJ2. CH CTIO N A 1 VOL Press to enter submenu field. VOL VIDEO ADJ. OTHER ADJ1 OTHER ADJ2 CH In OTHER ADJ2 submenu field press to select FREEZE. Press to select SPLIT or PIP. CH CTIO N A 2 VOL SD COLOR MATRIX ON VM SPLIT FREEZE VOL SPLIT PIP CH 3 FREEZE TV/VCR FREEZE When the screen is single press TV/VCR to freeze the screen.
CHANNEL SCAN CHANNEL SCAN Let you select the channel scanning mode either FAV or ALL. CHANNEL SCAN FAV CHANNEL SCAN ALL Press to display the roller guide menu. CH CTIO N A 1 To enter up to 16 favorite channels. To scan all channels when using the CH up/down buttons. VOL VOL CH EXIT Press to rotate to CHANNELS. Press to display CHANNELS. CH CTIO N A 2 LOCK VOL VOL FAVORITES CAPTION CH Press to select FAVORITES. CH CTIO N A 3 VOL VOL Press to enter submenu field.
CHANNEL SCAN FAVORITE CHANNELS Selection 1 FAVORITES CAPTION CH CTIO N A Under CHANNEL SCAN FAV press to select ENTER CHANNEL. VOL VOL CH 2 1 2 3 4 5 6 7 8 9 Use remote numeric keypad to select desired channel. FAVORITES CAPTION 0 CHANNEL SCAN FAV 15 ENTER CHANNEL FAVORITE CHANNELS 2 5 8 10 15 18 25 FAV CHANNEL SCAN ENTER CHANNEL 15 FAVORITE CHANNELS 2 5 8 10 18 25 TO ADD TO DELETE (Example: Channel 15 is selected) Press channel.
CAPTION Press to display the roller guide menu. CH CTIO N A 1 VOL VOL CH EXIT Press to rotate to CHANNELS. Press to display CHANNELS. CH CTIO N A 2 LOCK VOL VOL FAVORITES CAPTION CH PRESET CAPTION MANUAL CAPTION INPUT LABEL Press to select CAPTION. CH CTIO N A 3 VOL VOL Press to enter submenu field. CH Press to select PRESET CAPTION / MANUAL CAPTION / INPUT LABEL. Proceed to each adjustment menu. 4 To end Adjustment: EXIT N A Press twice to return to the roller guide.
CAPTION MANUAL CAPTION 1 Enter channel numbers and captions manually. A N CH CTIO VOL Under MANUAL CAPTION press to display next menu. VOL CH 2 FAVORITES CAPTION PRESET CAPTION MANUAL CAPTION INPUT LABEL Press to enter desired channel. 3 ____ ENTER CHANNEL N A MANUAL CAPTION CH CTIO VOL ENTER CAPTION VOL TO MOVE CURSOR OR CH 1 2 3 4 5 6 7 8 9 TO SELECT CHANNEL Use remote numeric keypad to select desired channel (refer to your local TV guide).
Selecting STEREO/SAP/MONO Press to display the roller guide menu. CH CTIO N A 1 VOL TIMER VOL CH EXIT Press to rotate to AUDIO. Press to display AUDIO. CH CTIO VOL VOL CH Press to select AUDIO ADJ.. AUDIO ADJ. OTHER ADJ. SURROUND SPEAKERS MODE STEREO BASS TREBLE BALANCE NORMAL CH CTIO VOL VOL Press to enter submenu field. CH Press to select MODE. NO Press to select STEREO / SAP / MONO.
Audio Adjustment 1 Press to display the roller guide menu. A N CH CTIO VOL TIMER VOL CH EXIT Press to rotate to AUDIO. Press to display AUDIO menu. CH CTIO N A 2 SET UP VOL VOL CH Press to select the main menu. AUDIO ADJ. OTHER ADJ. SPEAKERS SURROUND AUDIO ADJ. OTHER ADJ. SURROUND SPEAKERS MODE STEREO SAP MONO BASS TREBLE BALANCE NO NORMAL Proceed to each adjustment item of the selected main menu. Selecting BASS / TREBLE / BALANCE / NORMAL In AUDIO menu press to select AUDIO ADJ..
Audio Adjustment AI SOUND / BBE AI SOUND BBE Equalize overall volume levels across all channels.(AI sound is not available in VIDEO mode). Use special signal processing to accurately reproduce the "attack" of each sound, in order to make it immediate and superbly faithful to the original, while retaining its natural feel. In AUDIO menu press to select OTHER ADJ.. CH CTIO N A 1 VOL AUDIO ADJ. OTHER ADJ. SURROUND SPEAKERS VOL Press to enter submenu field. VOL Press to select AI SOUND or BBE.
Audio Adjustment SPEAKERS In AUDIO menu under SPEAKERS, select the desired SPEAKER mode. In AUDIO menu press to select SPEAKERS. 1 A N CH CTIO VOL AUDIO ADJ. OTHER ADJ. SURROUND SPEAKERS Press to enter submenu field. VOL CH ON Press to select your desired mode. CH CTIO N A 2 VOL ON VOL OFF & VARIABLE AUDIO OUT OFF & FIXED AUDIO OUT CH Function Mode ON TV speakers operate normally. OFF & Variable Audio Out TV speakers off -audio adjustable by television.
Picture in Picture Operation This television includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live broadcasts at the same time with or without an external video source such as a VCR, cable box, etc. Basic PIP Operation PIP 1 Press the PIP button on the remote control to display the PIP Frame on screen. Note: Audio is from Main Picture only. SAP POWER TV/VIDEO LIG H E UT T M T ASPEC DVD AUX DTV CBL RC R VR VC TV DB VOL PIP CH VCR CH .
Picture in Picture Operation PIP MIN, PIP MAX PIP MIN REW PIP MAX FF These features are used to size PIP Frame. Press PIP MIN REW or PIP MAX FF MAX to size the PIP Frame. Minimum Freeze FREEZE TV/VCR Main Picture During PIP operation this feature is used to stop action in PIP frame. FREEZE 1 Press TV/VCR to stop PIP frame action. 2 Press TV/VCR again to continue action. FREEZE Note: To stop action for Main picture: 1 In PICTURE MENU OTHER ADJ2, select FREEZE PIP or SPLIT (see p33).
Split Screen This feature lets you watch two different channels side by side with or without an external video source. The audio is from the Main picture only (left side). Split screen enables you to search other channels on the right screen or check video recording status. Splitting the screen 1 SAP POWER TV/VIDEO to display Split screen.
Split Screen Changing the channels for the Split Screen PIP CH VCR CH Select channels for the Split Screen by PIP CH VCR CH pressing CH SWAP Press SWAP to switch the SPLIT SCREEN and MAIN PICTURE source. . CH10 CH10 CH5 CH10 CH5 CH10 Changing the channels for the Main Picture CH Swapping left and right screens 1 2 3 4 5 6 7 8 9 Viewing Videos TV/VIDEO While Split screen is displayed, press switch modes.
ASPECT Controls The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. ASPECT ASPECT button The aspect mode changes each time the ASPECT button is pressed.
Cable TV When the antenna cable is connected to the TV antenna terminal via a cable box or VCR, set the TV channel to CH3 or CH4. This does not apply when signal is input from VIDEO INPUT. ANTENNA TERMINAL ON THE BACK OF THE TV To Antenna Input Incoming Cable from Antenna or Cable TV System.
TIMER The TIMER can switch the TV ON or OFF. Before attempting TIMER1 and TIMER2 confirm the CLOCK SET and adjust if necessary. Then set TIMER1 and TIMER2. Press to display the roller guide menu. CH CTIO N A 1 VOL LOCK VOL CH EXIT TIMER Press to rotate to TIMER. Press to display TIMER. CH CTIO N A 2 VOL TIMER VOL CLOCK SET SLEEP TIMER1 TIMER2 CH Press to select the main menu. TIME DAY 12 : 00 AM SUN Proceed to each adjustment item of the selected main menu.
TIMER 2 TIME Set the time of day. CH CTIO VOL TIMER CLOCK SET SLEEP TIMER1 TIMER2 Press to set hours AM or PM. N A Press to select TIME VOL TIME DAY 12 : 00 AM SUN TIME DAY 12 : 00 AM SUN TIME DAY 12 : 00 AM SUN CH 3 Press to move to minutes position. VOL CLOCK SET SLEEP TIMER1 TIMER2 Press to set minutes. N A TIMER CH CTIO VOL CH 4 DAY Set the day of the week. TIMER CH CTIO Press to select the day of the week. N A Press to select DAY.
TIMER Timer1 and Timer2 In TIMER menu, select one or both timers to turn the television on and off at selected times, on selected channels, and on selected days.TIME must be entered in CLOCK SET to operate the TIMER features. TIMER CH CTIO N A In TIMER menu press to select TIMER1 or TIMER2. VOL VOL Press to enter submenu field. CH DAY CLOCK SET SLEEP TIMER1 TIMER2 DAILY DAY 12 : 00 PM ON TIME OFF TIME 13 : 00 PM ENTER CHANNEL 5 SET YES Set the day of the week. Press to select DAY.
TIMER ENTER CHANNEL Press to select ENTER CHANNEL. 1 Press to select channel. N A TIMER CH CTIO VOL VOL CH CLOCK SET SLEEP TIMER1 TIMER2 DAILY DAY 12 : 00 PM ON TIME OFF TIME 13 : 00 PM ENTER CHANNEL 5 SET YES Press to select SET. 2 Press to select YES. N A TIMER CH CTIO VOL VOL YES NO CH CLOCK SET SLEEP TIMER1 TIMER2 DAILY DAY ON TIME 12 : 00 PM OFF TIME 13 : 00 PM ENTER CHANNEL 5 SET YES TIMER Activation The TIMER is active when the television is OFF or ON.
LOCK Feature Select LOCK SET to prevent video games and VCR tapes from being viewed. Press to display the roller guide menu. CH CTIO N A 1 VOL EXIT VOL LOCK TIMER CH Press to rotate to LOCK. Press to display LOCK menu. CH CTIO LOCK MODE HOW LONG ? N A 2 VOL VOL CH CHANNEL LOCK SET BLOCK PROGRAMS : U.S. MOVIES ON STATUS CHANGE CODE MODE 1 To use LOCK options ENTER CODE FIRST. 2 LOCK 3 4 5 6 7 8 9 Use the remote numeric keypad to enter a four-digit secret code.
LOCK Feature Press twice to return to the roller guide. CH CTIO N A To end Adjustment: VOL VOL EXIT CH LOCK TIMER Press to exit roller guide. This returns the set to normal viewing. NORMAL PICTURE OFF LOCK OFF LOCK MODE CH CTIO N A In LOCK MODE press to select OFF. VOL VOL TO SELECT LOCK MODE CH GAME In LOCK MODE press to select GAME. LOCK MODE VOL GAME LOCKS CH 3, 4 AND VIDEO INPUTS CH CTIO N A 1 LOCK VOL TO SELECT LOCK MODE CH Press ACTION twice.
LOCK Feature CHANNEL In LOCK MODE press to select CHANNEL. 1 LOCK MODE VOL CHANNEL LOCKS THESE CHANNELS 3 N A LOCK CH CTIO VOL TO MOVE CURSOR TO SELECT LOCK MODE CH LOCK LOCK MODE Press to select channel position. CH CTIO N A 2 VOL VOL TO MOVE CURSOR TO SELECT CHaNNEL Press to select channels. (Or use remote numeric keypad to select channels.) CH 1 2 3 4 5 6 7 8 9 CHANNEL LOCKS THESE CHANNELS 3 0 3 Repeat step 2 for up to four channels. Press ACTION twice.
V-CHIP Menu OPERATION In the United States and Canada, the V-CHIP consists of two rating systems, which are MPAA (MOTION PICTURE) and TV PARENTAL GUIDELINES. Its function is to block programs by following the rating data in the XDS data packets sent from broadcasting stations. The user can select which rating programs should be blocked by using the LOCK MENU options. Press to display the roller guide menu. CH CTIO N A 1 VOL VOL CH EXIT Press to rotate to LOCK. TIMER Press to display LOCK menu.
V-CHIP Menu OPERATION U.S. TV PROGRAMS CH CTIO N A This TV model features the “V-Chip technology” which allows you to use U.S. TV PROGRAMS Guide ratings to block various types of TV programs. PIP will also be blocked automatically. VOL VOL In U.S. TV PROGRAMS press to highlight STATUS. Press to display U.S. TV PROGRAMS RATING CHART. LOCK MODE HOW LONG ? CHANNEL LOCK SET BLOCK PROGRAMS : U.S. TV PROGRAMS ON STATUS CHANGE CODE CH LOCK Proceed to the following adjustments.
V-CHIP Menu OPERATION Customer Caution The V-Chip system that is used in this set is capable of blocking “NR” programs (non rated, not applicable and none) per FCC Rules Section15.120(e)(2).
V-CHIP Menu OPERATION U.S. MOVIES This TV model features the “V-Chip technology” which allows you to use Motion Picture Ratings when viewing movies or video tapes. This innovation allows parents to block various types of movies and video tapes at their discretion. PIP will also be blocked automatically. In U.S. MOVIES press to highlight STATUS. Press to display U.S. MOVIES RATING CHART. N A LOCK CH CTIO VOL VOL Proceed to the following adjustments.
V-CHIP Menu OPERATION Canadian English The V-CHIP used in this TV model allows you to block various types of movies and television programs based on the two rating systems used in Canada. PIP will also be blocked automatically. In CANADIAN ENGLISH press to highlight STATUS. 1 CH CTIO N A LOCK VOL VOL Press to display CANADIAN ENGLISH RATING CHART. MODE HOW LONG ? CHANNEL LOCK SET BLOCK PROGRAMS : U.S.
V-CHIP Menu OPERATION Canadian French The V-CHIP used in this TV model also lets you block or unblock Canadian French programs according to various ratings categories. PIP will also be blocked automatically. In CANADIAN FRENCH press to highlight STATUS. CH CTIO N A 1 VOL VOL Press to display CANADIAN FRENCH RATING CHART. LOCK MODE HOW LONG ? CH CHANNEL LOCK SET BLOCK PROGRAMS : U.S. MOVIES ON STATUS CHANGE CODE LOCK CANADIAN FRENCH VIEW E PROGRAMS ? Press to select CANADIAN FRENCH.
V-CHIP Menu OPERATION Blocking Message If V-Chip is enabled and the program exceeds the rating limit set by you, the blocking message will appear and the audio will be muted. Enter your four-digit secret code if you wish to continue viewing the program. After entering your code, all locks and rating blocks are disabled until the TV is turned off or until all settings are off.
Operating peripheral equipment using the remote control Programming The Illuminated Remote Control Using Access Codes The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component function buttons for VCR, DVD, AUX, RCVR, TV, DTV CABLE or DBS. Follow the procedures for programming your Remote Control with or without a code for the component. Determine the manufacturer of the component and look in the table for the code.
Operating peripheral equipment using the remote control Programming Without A Code (When the code is not known) This procedure searches all codes and is called the “sequence method.” 1 Confirm that the external component is plugged in and on. 2 Turn the component off.
Operating peripheral equipment using the remote control Infrared Codes Index The remote control is capable of operating many brands of peripheral equipment. Refer to pages 62 and 63 for programming procedures. Note: The remote control memory is limited and therefore some models may not operate. The remote control is not designed to control all features available in all models. Note: After entering the proper infrared code, press the desired Mode Selection Button on the remote control.
Operating peripheral equipment using the remote control Codes for Personal Video Recorders R VC Brand Panasonic Replay Philips Tivo Sony Tivo Code 100 101 102 Codes for DVD DVD Brand Denon Ferguson JVC Mitsubishi Nordmende Panasonic Philips Pioneer RCA Code 100 101 109 105 101 100 103 102 101 Brand Saba Samsung Sharp Sony Technics Thomson Toshiba Yamaha Zenith 101 110 108 104 100 101 103 100 107 Code Brand Optimus Panasonic Philips Pioneer Quasar RCA Sansui Sanyo Scott Sharp Sherwood Sony Soundesi
Operating peripheral equipment using the remote control Codes for Receivers RC VR Brand Admiral Aiwa Denon Fisher Garrard Harman Kardon Jensen JVC Kenwood Magnavox Marantz Mclntosh Nakamichi Onkyo Code 120 125, 126 134, 135, 136 104 113 115, 123 129 132, 133 100, 108 127 124 116 106 109, 114 Brand Optimus Panasonic Philips Pioneer Quasar RCA Sansui Sharp Sony Soundesign Teac Technics Victor Yamaha Code 103, 127, 130, 131 118, 119, 121 123 105, 107 118, 119, 121 103, 105, 127, 130, 131 103, 111, 139 134
Operating peripheral equipment using the remote control Mode Operational Key Chart This chart defines which keys that are operational after programming (if needed), while in the selected remote control mode TV, DTV, CABLE, DBS, VCR, DVD ...etc.
Operating peripheral equipment using the remote control KEY NAME POWER SAP VCR MODE (DVD) DVD MODE (CD) AUX MODE (VCR2) (TAPE) RCVR MODE POWER POWER POWER POWER POWER POWER - - - - - - TV MUTE TV MUTE RCVR MUTE TV MUTE RCVR MUTE RCVR MUTE - - - - - - TV INPUT SW TV INPUT SW - TV INPUT SW TV INPUT SW TV INPUT SW MUTE ASPECT TV/VIDEO LIGHT CH CTIO N A REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS VOL VOL CH BBE MENU REC
Troubleshooting Chart Before calling for service, determine the symptoms and follow suggested solutions.
Cleaning To ensure continued excellent performance by this product, periodic cleaning is recommended. 70 The unit contains many plastic parts. For this reason DO NOT use benzine, thinner or other chemicals to clean the unit. Dust will accumulate on the picture screen. Please wipe with a soft cloth from time to time. If you use a chemically treated cloth, please be careful to follow the instructions that come with the cloth. DO NOT bring into contact with insecticide or other volatile substances.
Specifications CT-30WX52 CT-34WX52 Power Source AC 120 V, 60 Hz AC 120 V, 60 Hz Power Consumption Average use : 170 W (Maximum Current 3.6 A) Stand-by condition : 0.2 W Average use : 170 W (Maximum Current 3.6 A) Stand-by condition : 0.2 W CRT 30-inch, 16 : 9 aspect ratio 34-inch, 16 : 9 aspect ratio Screen Size 25.95 ” (659.1 mm) (W) × 14.59 ” (370.7 mm) (H) × 29.77 ” (756.2 mm) (diagonal) 29.36 ” (745.9 mm) (W) × 16.5 ” (419.5 mm) (H) × 33.68 ” (855.7 mm) (diagonal) Dimensions (W×H×D) 32.
Customer’s Record The model number and serial number of this product can be found on its back cover. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
