I I ii IIIIll I I Ill II Illlllll Ill II I I I Color Television Operating Instructions ® CT-20G 11 CT-2010S CT-2011S CT-2012S Read these instructions Contents subject completely to change without before operating notice this set. or obligation, printed in Mexico TQB2AAO01(_3 Copyright 1998 by Mat,_ushitaIElectriGCorporation of America. All rightsreserved. Una_hodzed copyingand distributionis a violationof law.
Safety Instructions WARNING WARNING: To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel. The lightningflash with a_ _ is intended to tell the user that parts insidethe product are a risk ofwithin electricshockto ow-head a triangle persons. _ The exclamationpointwithin a triangle is intended to tell the user that importantoperating and servicing instructions are in the papers with the appliance.
14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. In the U.S.
Introduction Congratulations on Your New Purchase Yournew video componentfeatures an all solid state chassis which is designedto give you many years of enjoyment.It was thoroughlytested and adjusted at the factoryfor best performance. In order for you totake fulladvantage of yournew videocomponent,please read and followthe installationand operating instructionssuppliedwith this product. Customer's Record The modeland serialnumber ofthis productmay be foundon itsback cover.
Receiver Installation Location This unitisintendedto be used withan optionalstand or entertainmentcenter.Consultyourdealerfor available options. Locate for comfortableviewing. Avoid placingwhere sunlightor other brightlight (includingreflections)willfall on the screen. Use of some types of fluorescentlightingmay reduce remote controltransmitter range. Adequate ventilation is essentialto prevent internalcomponent failure. Keep away from areas of excessive heat or moisture.
Installation (cont.) Antenna/Cable Connections Antenna Connection - For proper reception'of VHF/UHF channels an external antenna is required. For best reception an outdoor antenna is recommended. Antenna Mode must be set to TV, (Refer to Antenna Mode section.
Optional Equipment Connection Video/Audio and Operation Connection TERMINALS ON BACK OF RECEIVER ®® VCR or VIDEO DISC R VIDEO OUT G AUDIO OUT BACK OF VCR Operation 1. Connect optional equipmentas shown to INPUT. 2. Select the Video mode by pressingthe TVNIDEO button. 3. Operate optional equipment (VCR-VDP) as instructedin Optional Equipment manual.
Location of Controls (Remote and Receiver) POWER MUTE TVNIDEO SLEEP O0000 ] O0 Ir-_ T'I _1 ®®®i i[ Front Control Panel ®®® @i Remote Control Sensor R-TUNEI (_ i RECALL Quick Reference Control Operation Q Power Button- Press to turn ON or OFF. Vol (Volume) Buttons - Press to adjust Sound Level. Press to adjust AudioMenus, Video Menus, and select operatingfeatures when menus are displayed. Remote Control Ch (Channel) Bl_lons - Press to select programmed channels.
Remote Quick Reference Functional Key Chart KEY POWER ' OPERATES FUNCTION © TV Turns TV On and Off MUTE TV Mutes TV Audio TV Selects the TV Input Mode TV ActivatesTV Menus I'V Channel Up/Down, Menu Navigation W Volume Up/Down, Menu Navigation @®® ®®® ®®® ® W SelectsChannel Selects code in Game Guard Menu Selects Channel in Channel Caption Menu Selects Channel in _mer Menu R-TUNE TV Selects PreviouslyTuned Channel RECALL TV DisplaysChannel, Time, andAudio Mode SLEEP TV Selects 30
Control Operation Power Button - Press the POWER buttontoturn ON. Press again to turn OFF. CH (Channel) Buttons Option 1. Press the CHANNEL (CH) UP or DOWN button to sequentially scan through programmed channels (while On Screen Menus are not displayed). POWER Located On Remote Control SelectsNext Vol (Volume) Buttons - PresstheVOLUME (VOL) LEFT or RIGHT button for desired listeninglevel (whileOn Screen Menus are not displayed).
Recall Button - Press the RECALL button to review: • Audio Mode status • CH Number or Video Input selected • Sleep Timer status • Clock Time • Channel Caption (Station Identifier) R.Tune (Rapid Tune) Button - Press the R-TUNE (RAPID TUNE) button to instantly switch between the lasttwo channelsselected (withoutany On Screen display being activated).
Main Menu (Icons) BIm,Dm Located On Remote Control FeatureWhen Menu is Displayed Selects or Adjusts Features When _ Menu is Displayed Selects Desired Displaysand Exits Menus 1. 2. Press the ACTION button to display the Main Menu with Icons. Press the CH UP or DOWN and the VOL LEFT or RIGHT buttonsto highlightthe desired Icon when the Main Menu isdisplayed(selected Iconwillbe indicatedin Red). Pressthe VOL buttonsfor leftand rightmovementand the CH buttons for up or down movement. 3.
Picture Norm Picture Adjustments • • • • • • - This feature is used to reset Color, Tint, Bdghtness, Picture and Sharpness adjustmentsback to a factory preset level. 1. Pressthe ACTION buttontodisplaythe Main Menu. 2. Press the CH UP/DOWN and VOL LEFT/RIGHT buttonsto highlightthe PictureIcon. 3. Press the ACTION button to display the Picture AdjustmentMenu. PictureNorm Color Tint Bdghtness Picture Sharpness LocatedOn Remote Control Selects Desired FeatureWhen Menu J$DIsplayod Ac'noN 4.
Stereo/SAP/Mono Audio Mode When Audio is broadcast in Stereo or SAP an ON Screen display will appear on initial "Turn On" and =Channel Change'. The available choices will be indicated in red. 1. 2. 3. Located On Remote Control Pressthe ACTION buttontodisplaythe Main Menu. Press the CH UP/DOWN and VOL LEFT/RIGHT buttonsto highlightthe Audio Icon. Press the ACTION button to display the Audio AdiustmentMenu.
Game Guard Located On Remote Control Selects Desired FeatureWher_ Menu Is Displayed Game Guard Activated ACTION Selects or Adjusts FeaturesWhen Menu is Displayed _) O Unlock (Game Guard) To unlock the Game Guard feature, repeat steps 1 through 3. Enter the same 3 digitcode previouslyused in step 5 with Remote Control Keyboard. Displays and Exits Menus Lock (Game Guard) - Preventsvideo games and othervideosourcesfrom beingviewed. Channel 3, 4 and video inputsare lockedout for 12, 24 or 48 hours.
Channel Caption This feature allowsyou to enter the call names of up to 30 stations into memory (using up to 4 characters for each station). The call name willthen displayalong with the channel number when changing channels or pressingRECALL. Located On Remote Control I CH03 xYYz ,,__Charmel Captio_ aGkJcts O6=,__=,a FeatureWhen Menu is Displayed Sta_k_lden_m) ACTION Selectso¢ Adjusts FeaturesWhen (_£) MenuisDisplayed Displays and Exits Menus 1. Press theACTION buttonto displaythe Main Menu. 2.
Timer Features Program Timer - This feature is capable of turningthe TV on,tunedto a desiredchannel andoff at a predeterminedtime (one day or daily). NOTE: The clock mustbe set for thisfeature to operate. (Refer to the Set-Up Menu to set time.) 1. Press the ACTION buttontodisplaythe Main Menu. 2. Press the CH UP/DOWN and VOL LEFT/RIGHT buttonsto highlightthe Timer Icon. 3. Press the ACTION button to display the Timer Control Menu.
Set-Up • • • * • • • Ant (Antenna)- The proper Inputmode mustbe selected for the type of signal at the antenna input. • TV mode is usedwhen the Receiver is notconnected to a cable TV system, for example when using a VHF/UHF antenna (channels02 - 69). • Cable mode is used when the Receiver is connected to a Cable TV system and you are not using a cable companyconverter box (channels 01 - 125).
Set-up Features Manual (cont.) Prog (Program) - Thisfeature allows you to select which channels are placed into Channel Scan Memory. 1. Pressthe ACTION buttontodisplaythe Main Menu. 2. Press the CH UP/DOWN and VOL LEFT/RIGHT buttonsto highlightthe Set-Up Icon. 3. Press the ACTION button to display the Set-Up Menu. Located On Remote Control Selects Desired Feature When Menu isDisplayed ACTION Selects or Adjusts FeaturesWhen Menu Is Displayed Q Displays and Exits Menus 4. 5.
CC (Closed Caption) On Mute Set-up Features (cont.) Activates the On Screen Closed Captioningwhen the MUTE button on the Remote Control is pressed. To deactivate press the MUTE button again. NOTE: This feature onlyfunctionswhen the Close Caption Mode is in the _OFF"position.The program being viewed must be broadcast with Closed Caption. (Refer to your _ocalTV guide.) Located On Remote Control _ Selocts Desired 1. 2. MeFnu iea_'_isplaWh_ [ Selectsor Adjusts FeaturesWhen Menu is Displayed V . 3.
Set-up Features (cont.) CC (Closed Caption) Mode This Receiver has a built in decoder that provides a visual depiction of the audio portion of a television programin the form of writtenwords across the screen 0Nhlte or Colored letters on a black background). It allows the viewer to read the dialogue of a television programor other information. Located On Remote Control 1. 2. 3.
Set-up Features (cont.) Trilingual Menu Selection The Language Menu is factory set to ENGLISH. Follow these Instructions to change the Language Menu to Spanish or French and back to English. 1. Press the ACTION button to display the Main Menu. 2. Press the CH UP/DOWN and VOL LEFT/RIGHT buttons to highlightthe SET-UP Icon. 3. Press the ACTION button to display the Set-Up Menu.
Care and Cleaning Picture Tube (Turn set off) use a mildsoap solutionor window cleaner and.a clean cloth. DO NOT USE ABRASIVE CLEANERS. Avoidexcessive moistureand wipe dry. Plastic Cabinets Wipe thecabinet with a softclothdampened with water or a milddetergent solutionand wipe drywith a softclean cloth. Avoidexcessive moisture.Do not use benzene, thinnersor other petroleumbased cleaners. Wood Cabinets When dustingor polishingthe cabinet, use a clean soft _oth and stroke straightwith the grain.
Troubleshooting Chart Beforeyou call for service, determine the symptomsand make a few simple checks shown below.
