| Panasonic welcomes you to their constantly growing family of electronic products owners. ) We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and assembled by people who are proud of the reputation their work has built for our company.
Power and Sound Controls ; 143 N Il Power H Turn the key in the ignition until the accessory indicator Note 5 When the power is switch lights. ed on for the first time, a demon) station message appears on the display. To cancel this display, press {0} (BISECT. Power on : Press [PW. Po wear off : Crass [PWR] again and hold. The pane removal alarm sounds. (» Page 18). Volume Loudness Attenuation [OVAL] : Up Press [L} {LOUD] to enhance Press [ATT] to decrease volume [\VOL] : Down bass and treble tones at low o
R N o] Radio Basics © Mode Selection Press [MODE] to change to the radio mods. @ Band Press [BAND] to change the bands. O Mono/Local Selection MONO : Monaural reception. Select MONO ta reduce knolls when receiving a stereo broadest. LOCAL : Tunes in string stations ably. FM broadcasts Press and hied [M/L) {MONOCLONAL) to change the mode. Release when at the desired point. AM broadcast Press [MAL] (MONOCLONAL) to switch LOCAL mode on and off.
Preset Station Setting Up to 6 stations each can be saved In the Fall, FMZ, FM3 and AM (LW/MW) preset station memories. N a1 2-4 €@ Band Defect a band. (™ Page 8) Band @ Auto Station Preset Crass and hold [BAND] (AUTO#P} for more than 2 seconds {Auto Preset Memory). «The 6 strongest available stations quiff be automatically saved in the memory under preset buttons Rice set, the preset stations are sequentially scanner for 5 seconds each. Manual Station Preset {1) Use manual or seek tuning to find a station.
RDS (Radio Data System) The following functions are available when receiving RDS stations. PS Display (Program Service Name) The name of station is displayed instead of the frequency. CT Service {Clock Time} When receiving an RDS station, the GT (Clack Tami} servile automatically adjusts the time and date. *NO GT" Is displayed in areas where CT service Is not available.
LT Sosa RDS FM stations periodically provide traffic information. {Traffic Program} {Traffic Announcements) Broadcasting of traffic information announcements on traffic matron conditions TA Mode TA on Press [TA] to to switch TA mods on and off. TAG TA Volume Set (Volume Level Press [OVAL] or wheels recalling traffic announcements . The TA volume differs from the regular volume levels). TA in GD Mode When playback will be interrupted ty FM beatific announcements.
Rns (Radio Data system) {continued) ROS FM stations provide a program type identification signal. Example: news, rock, classical music, etc. PTY Mode Press [PTY] to switch PTY display mode on or off. When theta is no corresponding program type, “NO PTY” is display PTY Selection Q) Cross 7o change the program type as fellows.
PTY Preset Program types ars stored in memory under preset buttons 111 to {81 5 shown in the table below. To tune in the desired program type, pass any of preset buttons [1]ta [8]. o A o 1] News NEWS AFFAIRS / INFO EDUCATE / DRAMA CULTURES / SCIENCE VARIED / WEATHER 2| specter | Fiance ; CHILDREN SOCIAL A/ RELIGION PHONE IN / TRAVEL LEISURE / DOCUMENT 3| sport SPORT 4 | Pop. Muse POMP Classic 5| " CLASSICS ROCK M/ M.O.
Play back will start automatically, 4 CD Player G L A Disc Insert and Playback insert a disc, B Stop and Disc Eject. Press 1o stop €D play and sect the disc. Label side / ONLY USE DISCS CARRYING THE LABEL Ug@ SHOWN ON THE RIGHT DIGITAL AU BID Listening to a CD Mode Selection Press [SOURCE] to sangs o the CD mode. Source [ Rally T ] ‘. Playschool: {Wuhan 2 D is-inserted) P — Track Selection : Advance to the next track. [4
Note : The CD changer frictions are designed for an optional CD changer unit. A A Track Number Playing time Duse indicator Display Change Press [D] {DISPIRIT) to switch to the o clock display. Press again to cancel. Error Display Messages for CD Player ® Press [5] (RANDOM). CD is girt or inverted. The All tracks are played in disc will be ejected automation order. call. [ # Press again to cancel. # Press [3] (SAGAN. ‘The figs 10 seconds of each back on the disc are played in sequence.
Installation LU« Be tore Installation, check the radio operation with antenna and E 27T L4 speakers. © Disconnect the cable from the negative battery terminal First complete the electrical connections, and then {sae caution below). sack them for correctness. (w Page 20). ® Unit should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°.
Insert Mounting Collar @ into the dashboard, and bend the mounting tabs out with a screwdriver. — Mounting Tabs e Mounting Bolt (2 _@ /fi\ Secure the rear of the unit. Afar fixing Mounting Bolt (2 and Power Connector fix the rear of the unit o the car body by dither method {a) or {b) shown at right. Insert Trim Plate ®.
Installation costliness To Remove the Unit Remove the removable face plate. {a) Press the release [ button {41, Pull on the right side of the unit. 0 Remove the trim plate with a screwdriver. 9 Ult out the unit while pushing down the lock lever with a screwdriver, e Remove the unit pulling with both hands.
Anti-Theft System This unit is equipped with a removable face plate. Removing this face plate makes the radii focally inoperable. The security indicator will blink. Place Removable Face Plate into Case © Switch off the power of the unit, @ Remove the removable face plate. {w Page 18.) @ Gently pass the bottom of the case and open the cover. Place the face plate into the case and take it with you when you slave the car. ® Remarkableness Plate Case v Set two arrows together. ve the face plé off-Do.
C1: (Brown) Brown) Not used ©2: {Orange) Telephone Mute Lead () Connect to the car telephone mute lead. (Orange) Note: The telephone mute Izod is only for connection to the radio mute lead. Output other than telephone will not be muted Navy Mute Lead To the Navy Mute lead of the Panasonic car navigation system. > Telephone Mute The sound from the speakers cannot be heard while the A5 telephone conversation is in progress.
Speaker Connections (White} # Use grounded speaker only, LI ® The maximum speaker output should more. {If used with (Wis the optional power amplifier, the speaker output should be higher than black spite) o the maximum amplifier cutout) LG o *The speaker impedance should bed This unit uses the LGBT circuit, 5o each speaker should be connected {Gray separately using parallel vinyl insulated cords.
Specifications -General. : FM Stereo Nadia Power Supply 1 BCI2V {11V -18 V), Test Frequency Range : 875108 MHz Voltage 14.4 V., Negative | Usable Sensitivity + 6 dBAV(S/N 30 dB) Ground Stereo Separation : 3508 (at 1 kHz) Tone Contorts : Bass; 128 at 100 Hz MW Radio Treble; Frequency Range 1 kHz birdbath 10 khz Usable Sensitivity o 28 dB/IV (S/N 20 6B) Current Consumption : Less than 2.5 A {CD mode, 0.
