CD Player/Receiver with Dot Matrix LCD and CD Changer Control CQ-DF701W REMOTE SET/AUTO• P ;/1 BAND VOL P • SET CQ-DF701W MOSFET 50W X 4 OPEN DISP CH•C !@ D•M TUNE TRACK MENU PWR SOURCE DISC S•HDB MUTE Operating Instructions DIM HDB CD RECEIVER WIITH FULL DOT MATRIX DISPLAY ≥ Please read these instructions carefully before using this product and save this manual for future use.
Panasonic welcomes you to our ever growing family of electronic product owners. We know that this product will bring you many hours of enjoyment. Our reputation is built on precise electronic and mechanical engineering, manufactured with carefully selected components and assembled by people who take pride in their work. Once you discover the quality, reliability, and value we have built into this product, you too will be proud to be a member of our family.
E N G L I S H Features Remote Control Unit Preparation Full-dot expressiveness <3D dot matrix display> Battery Installation 1 You can select an operation quickly because operation items are shown on the display. You can also enjoy variety of actions and direction. 1 Audio control functions 2 ≥ S•HDB (Super High Definition Bass) (➡ page 14) ≥ CD changer control (➡ page 20) Anti-theft removable face 3 E N G L I S H Lithium battery (included) Remove the battery holder.
E N G L I S H 3 General 1 Power Turn the key in the ignition until the accessory indicator lights. ON: Press [SOURCE] (PWR). OFF: Press [SOURCE] (PWR) again for more than 1 second. ACC ON Volume Open/Close the Front Panel [" VOL]: Up [# VOL]: Down OPEN: Press [OPEN] on the front panel. CLOSE: Raise the panel by hand. E N G L I S H 4 Setting range: 0 to 40 < Note: ≥ The sound level for each source is stored in memory.
E N G L I S H 5 General (Continued) S•HDB (Super High Definition Bass) Display Change Especially for rock music, the bass-sound will be more powerful. Press [S•HDB] on the main unit to change the Super High Definition Bass on. : Default Press [DISP]. E N G L I S H 6 When Power is ON Mode display Mode and spectrum analyzer display : The bass sounds of the speakers are strongly emphasized. : The bass sounds of the speakers are moderately emphasized. (The sounds of the subwoofer can be heard clearly.
E N G L I S H 7 Radio Mode 1 Radio Press [SOURCE] to change to the radio mode. One-Touch Selection of a Preset Station Radio mode display E N G L I S H 8 Up to 6 stations each can be saved in the FM1, FM2, FM3 and AM preset station memories. 2 Band Press [BAND] to change the band. 1 Select a band and frequency (steps 1, 2 and 3 on the previous page). 2 Press and hold [P. SET "] or [P. SET #]/["] or [#] for more than 2 seconds until the preset number blinks. 3 Press [P. SET "] or [P.
E N G L I S H CD Player Menu Setting on CD Player Mode Disc Insert and Playback 9 E N G L I S H Open the front panel. Q-DF701W 1 Press [OPEN] on the front panel. MOSFET 50W X 4 OPEN DISP Press [MENU]/[SEL] (MENU) during CD playing. 2 Press [P. SET "] or [P. SET #]/["] or [#] to select a submenu. 3 Press [BAND] (SET) to change the setting. D•M PWR SOURCE the disc. 2 Insert Close the front panel manually. < (EJECT) Playback will start automatically.
E N G L I S H 11 CD Changer CD changer functions are designed for optional Panasonic CD changer unit. Preparation: ≥ Connect the CD changer, and load a magazine (disc). Notes: ≥ Loading a magazine when the power is off allows the power to be turned on. ≥ Ejecting the magazine when the unit is in the CD changer mode allows the power to be turned off. ≥ Pausing does not function in the CD changer mode.
E N G L I S H Audio Settings [DISP] [MENU] [BAND] (SET) 13 POWER Audio menu display SOURCE 1 2 RAND CQ-DF701W REMOTE SET/AUTO•P ;/1 MOSFET BAND VOL P • SET 50W X 4 OPEN DISP CH•C !@ TUNE TRACK MENU VOL D•M 3 4 SCAN REP PWR 5 SOURCE DISC S•HDB MUTE 6 DIM MENU HDB CD RECEIVER WIITH FULL DOT MATRIX DISPLAY ["] [#] (MENU SELECT) [P.SET "] [P.SET #] [TUNE %] [TUNE $] (MENU SELECT) (BAS/TRE/BAL/FAD/ LEVEL/LPF) SEL BAND MUTE DISP Car Audio 1 Menu Press [P.
E N G L I S H Picture (Display) Settings [MENU] [BAND] (SET) 15 VOL P • SET MOSFET ;/1 SOURCE 50W X 4 1 2 OPEN DISP CH•C !@ D •M TUNE TRACK MENU POWER Display menu display RAND CQ-DF701W REMOTE SET/AUTO•P BAND [DISP] VOL PWR SOURCE DISC S•HDB MUTE 3 4 SCAN REP 5 6 DIM MENU HDB CD RECEIVER WIITH FULL DOT MATRIX DISPLAY ["] [#] (MENU SELECT/ CLOCK ADJ) [P.SET "] [P.
E N G L I S H User Settings [MENU] [BAND] (SET) [DISP] POWER Function menu display 17 SOURCE 1 2 RAND CQ-DF701W REMOTE SET/AUTO•P ;/1 MOSFET BAND VOL P • SET 50W X 4 OPEN DISP CH•C !@ D •M TUNE TRACK MENU VOL 3 4 SCAN REP PWR 5 SOURCE DISC S•HDB MUTE DIM 6 MENU HDB ["] [#] (MENU SELECT) CD RECEIVER WIITH FULL DOT MATRIX DISPLAY [P.SET "] [P.
E N G L I S H Installation Guide ❐ Identify All Leads WARNING 19 This installation information is designed for experienced installers and is not intended for non-technical individuals. It does not contain warnings or cautions of potential dangers involved in attempting to install this product. Any attempt to install this product in a motor car by anyone other than qualified installer could cause damage to the electrical system and could result in serious personal injury or death.
E N G L I S H 21 Installation Guide (Continued) Speakers Connect the speaker wires. See the wiring diagram (➡ pages 34j35) for the proper hookups. Follow the diagram carefully to avoid damaging the speakers and the stereo unit. The speakers used must be able to handle more than 50 W of audio power. If using an optional audio amplifier, the speakers should be able to handle the maximum amplifier output power. Speakers with low input ratings can be damaged.
E N G L I S H Installation Guide (Continued) Anti-Theft System Remove the Unit This unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable. The security indicator will blink. 23 Switch off the power of the unit. Place the Removable Face Plate into Case the removable face plate. 1 Remove 1 Press [OPEN]. The removable face plate will Main unit 1 Open Contact be opened.
E N G L I S H 25 Electrical Connections Cautions: ≥ This product is designed to operate of a 12 V DC, negative ground battery system. ≥ To prevent damage to the unit, be sure to follow the connection diagram below. ≥ Remove approx. 5 mm of protective covering from the ends of the leads before connecting. ≥ Do not insert the power connector into the unit until the wiring is completed. ≥ Be sure to insulate any exposed wires from a possible short-circuit from the car chassis.
E N G L I S H 27 Electrical Connections (Continued) Troubleshooting ❐ Upgrading the System Preliminary Steps Check and take steps as described in the tables below. Example Combination ≥ CD changer (CX-DP88U/N) ≥ Stereo power amplifier If You Suspect Something Wrong Immediately switch power off. Disconnect the power connector and check that there is neither smoke nor heat from the unit before asking for repairs. Never try to repair the unit yourself because it is dangerous to do so.
E N G L I S H Troubleshooting (Continued) ❐ Radio 29 ❐ Sound Setting Trouble Much noise in FM stereo and monaural broadcasts. Preset station is reset. Cause/Step Station is too far, or signals are too weak. ➡Select other stations of higher signal level. The radio antenna is not extended enough. ➡Set the radio antenna enough. Battery cable is not correctly connected. ➡Connect the battery cable to the terminal that is always live.
E N G L I S H Troubleshooting (Continued) 31 ❐ CD E N G L I S H Error Display Messages ❐ CD Changer Display Cause/Step Display ≥ Disc is dirty, or is upside down. ≥ Disc has scars. After 5 seconds. ➡Press [OPEN] to open the front panel and press [<] (EJECT). ≥ Check disc. ≥ Load the disc again. 32 Cause/Step ≥ Disc is dirty, or is upside down. ≥ Disc has scars. ➡Check disc. (The changer automatically switches to the next disc.) POWER OFF After 5 seconds. No operation by some cause.
E N G L I S H Maintenance Specifications Care of the Unit ❐ General 33 ❐ Cleaning this Unit ❐ Caution on Cleaning Use a dry, soft cloth to wipe. Never use solvents such as benzine, thinner as they may mar the surface of the unit. Notes on CD ONLY USE DISCS CARRYING THE LABEL E N G L I S H Power supply: 12 V DC (11 Vj16 V), test voltage 14.4 V, negative ground Current consumption: Less than 2.2 A (CD play mode; 0.
