WMA MP3 CD Player/Receiver Model: CQ-C8403N CQ-C8403N AF TA DISP PTY Operating Instructions Bedienungsanleitung Manuel d’instructions d instructions Gebruiksaanwijzing Bruksanvisning Manuale di istruzioni Manual de Instrucciones Brugsvejledning àÌÒÚÛ͈Ëfl ÔÓ ˝ÍÒÔÎÛ‡Ú‡ˆËË TEXT ¡Please read these instructions carefully before using this product and keep this manual for future reference.
Safety Information ■ Read the operating instructions for the unit and all other components of your car audio system carefully before using the system. They contain instructions about how to use the system in a safe and effective manner. Panasonic assumes no responsibility for any problems resulting from failure to observe the instructions given in this manual. This pictograph intends to alert you to the presence of important operating instructions and Warning installation instructions.
❑ Keep the sound volume at an appropriate level. Keep the volume level low enough to be aware of road and traffic conditions while driving. ❑ Do not insert or allow your hand or fingers to be caught in the unit. To prevent injury, do not get your hand or fingers caught in moving parts or in the disc slot. Especially watch out for infants. ❑ This unit is designed for use exclusively in automobiles. ❑ Do not operate the unit for a prolonged period with the engine turned off.
Safety Information (continued) CLASS 1 LASER PRODUCT Label Indications and Their Locations CAUTION LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM. Laser Product Caution THIS PRODUCT IS A CLASS 1 LASER PRODUCT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXX XXXXXXXXXXXXXX XXXXXXXXXXXXXXXX OO-OOOOO Operating Instructions System Upgrade Guidebook (YEFM285773) (YEFM262688) Q'ty: 1 Q'ty: 1 Installation Instructions (YEFM294139) (YEFM294140) (YEFM294141) PAN EUROPEAN GUARANTEE (Warranty Card) Q'ty: 1 Q'ty: 1 set POWER SOURCE MENU SEL SRC VOL SET BAND MUTE 1 2 3 RANDOM SCAN REPEAT 4 5 7 8 9 0 DISP TUNE 6 TUNE # NUMBER Accessories CAR AUDIO Remote Control Unit (including a battery) (CR2025) Power Co
Features CQ-C8403N WMA MP3 CD Player/Receiver Hands-Free Phone System Connection of the optional Hands-Free Phone System (HandsFree Kit featuring Bluetooth® technology: CY-BT100N) allows users to talk on a handsfree cellular phone if the phone supports Bluetooth. Note: This unit is designed only for receiving calls. It cannot send calls. Bluetooth® The Bluetooth word mark and logo are owned by the Bluetooth SIG, Inc. and any use of such marks by Matsushita Electric Industrial Co.,Ltd. is under license.
Contents English 2 42 82 122 162 202 242 282 322 Common ¡Safety Information ¡Before Reading These Instructions ¡Features ¡Controls Layout ¡Preparation (ACC Setting etc.) ¡General ¡Sound Control 2 4 6 8 10 12 16 Each Source ¡Radio ¡Radio Data System (RDS) in FM Broadcasting ¡CD Player ¡MP3/WMA Player 18 20 24 26 As Needed Deutsch Français Nederlands Svenska Italiano Español Dansk êÛÒÒÍËÈ ¡Audio Setting ¡Function Setting (Security Function Setting etc.
Controls Layout Main Unit Note: This instruction manual explains operations for use with the buttons on the main unit.
# Remote Control Unit NUMBER – 9 VOL Volume }:Up {:Down SEL Select MENU Number RANDOM 4 0 to 9 POWER SRC (SOURCE) RANDOM POWER SOURCE MENU SEL SRC SCAN 5 REPEAT 6 7 SCAN REPEAT 9 VOL SET BAND Pause/Play SET APM Auto Preset Memory BAND MUTE 1 2 3 RANDOM SCAN REPEAT 4 5 6 7 8 9 0 DISP TUNE TUNE TRACK (FILE) 8 MUTE SBC-SW Super Bass Control-Subwoofer TUNE # NUMBER DISP Display CAR AUDIO 0 Controls Layout 0 English Number Buttons Operations executable only wit
Cancellation of demonstration screen Preparation For the first use, the following screen may appear repeatedly. 5 Press [{] or [}] to select “DEMONSTRATION”. 1 Set your car's ignition switch to the ACC or On position. 2 Press [SRC] (PWR: POWER). The demonstration screen appears. 6 Press [BAND] (SET) to select “OFF” 7 Press [MENU]. For using the remote control, hold down [SEL] (MENU) for 2 sec. or more.
Be sure to select OFF when your car has no ACC position in the ignition switch. Failure to do this could cause the battery to go dead. For a ACC-equipped car, select ON. (a page 31) The following functions are available. (default: OFF) ¡ The power is turned on automatically when inserting a disc. ¡ The clock can be displayed even if the power is off. (a page 15) English ACC Setting Caution OFF ACC Clock adjustment Other Settings The following functions are activated when the Security Function is ON.
General This chapter explains how to turn on or off the power, how to adjust the volume, etc. Power on Press [SRC] (PWR: POWER). CQ-C8403N AF TA (PWR: POWER) Power On/off DISP PTY Power off Hold down [SRC] (PWR: POWER) until you hear a beep, then release it. 12 3 Put the face plate in the case. Removing Mounting 1 Turn off the power (a page 12) 2 Press [ ] 1 Slide the left side of the face plate in place. (Release).
When a disc is already loaded, the disc will automatically be ejected. CQ-C8403N AF TA DISP PTY Tilt Cautions: ¡ To avoid damaging the face plate, do not push it down or place objects on it while it is open. ¡ Do not pinch your finger or hand in the face plate. ¡ Do not insert foreign objects into the disc slots. ¡ For the following cases, the face plate automatically closes. Use caution not to catch your finger.
General The source changes as follows every time [SRC] (SOURCE) is pressed. CQ-C8403N AF TA DISP PTY Radio FM1, FM2, FM3, AM (LW/MW) (a page 18) Player System-up Connector Device connected to the System-up Connector of the this unit When optional devices are connected: Shift to connected devices When an expansion module is connected: The devices connected to the ports 1 to 4 are activated in sequence after shifting to AUX2 (devices connected to the AUX terminal of the expansion module).
CQ-C8403N AF TA DISP PTY English The display changes as follows every time [D] (DISP: DISPLAY) is pressed. Note: The graphic pattern and still image are selectable. (a page 32) At power-on: Mode Display OFF All displays disappear in 5 seconds. Ordinary display + clock Ordinary display + graphic pattern Only graphic pattern General (DISP: DISPLAY) Display Change Folder hierarchy (MP3/WMA mode only.
Sound Control SRS WOW SRS WOW™ is 3-D sound technology based on the HRTF (Head Related Transfer Function) theory. Unlike conventional audio systems, “natural 3-D sound field”, “rich bass”, and “crisp and clear sound” can be obtained at the same time in a wide area in front of speakers. CQ-C8403N AF TA DISP PTY Holding down [VOLUME] (SRS WOW) for 2 sec. or more toggles SRS WOW on and off.
AF TA SQ changeover The SQ category is changed every time [SQ] (Sound Quality) is pressed. Note: Setting of SQ, bass/treble and volume are influenced one another. If the influence mentioned above causes distortion to the audio signal, readjust bass/treble or volume. (a page 30) Lights when SQ is activated. SQ is adjustable in accordance with your taste. 1 Hold down [SQ] (SOUND QUALITY) for 2 CQ-C8403N AF TA DISP PTY 2 Press [BAND]. The targeted SQ preset appears. (USER) SQ adjustment sec.
Radio This chapter explains how to listen to the radio. 1 Press [SRC] (SOURCE) to select the radio mode. CQ-C8403N AF TA DISP PTY Operation Flow 2 Press [BAND] to select a band. 3 Select a station. Frequency adjustment []] (TUNE): Lower [[] (TUNE): Higher Notes: ¡ For tuning in on only stations whose receiving conditions are good in the station search, set LOCAL to ON. (a page 19) ¡ For reducing noise when a receiving FM stereo wave is weak, set MONO to ON. (a page 19) Note: Hold down for 0.5 sec.
Auto Preset Memory (APM) English 1 Tune in to a station. 2 Hold down [}] or [{] for 2 sec. or more. 3 Select a preset number by pressing [}] or [{]. Note: If [BAND] is pressed while receiving an FM station, FM broadcasting is changeable among FM 1 to FM 3. Stations with good receiving conditions automatically preset. 1 Select a band. down 2 Hold [BAND] (APM) Manual station preset 4 Hold down [BAND] (SET) for 2 sec. or more to determine the selection. DISP PTY for 2 sec. or more.
Radio Data System (RDS) in FM Broadcasting Useful functions such as AF, TA, PTY, etc. are available in the RDS (Radio Data System)-ready areas. Some FM stations are broadcasting added data compatible with RDS. This radio set offers convenient functions using such data. RDS service availability varies with areas. Please understand if RDS service is not available in your area, the following service is not available, either. The following functions are available when receiving RDS stations.
Program Service Name PTY on display English Lights when TA is activated. Receiving station PTY RDS mode display Lights when PTY is activated. Lights while receiving a TP station (that broadcasts TA). Lights when AF is activated. TA receiving display Lights while receiving the TA signal. Holding down [TA] (AF) for 2 sec. or more toggles AF on and off. Set AF to off for presetting a non-RDS station or other cases.
Radio Data System (RDS) in FM Broadcasting TA ON/OFF Pressing [TA] toggles TA on and off. CQ-C8403N AF TA DISP PTY (TA: TRAFFIC ANNOUNCEMENT) TA Notes: ¡ This operation is not adjustable by the remote control. ¡ Traffic information is available in monaural. ¡ Adjust the TA volume only while receiving a TA. Lights when TA is activated. 1 Press [MENU] to display the menu dis- 22 (AF: ALTERNATIVE FREQUENCY/REGION) AF/Region Setting (FM Menu Display) play.
Holding down [D] (PTY) for 2 sec. or more toggles PTY mode on and off. 2 Press [BAND] (SET). English PTY ON/OFF Search starts. DISP PTY Notes: ¡ To stop searching, press [BAND] (SET). ¡ When there is no corresponding program type station, Program Search by PTY “NONE” is displayed. Press [}] or [{] to select PTY in the PTY mode.
CD Player When a disc is already loaded, press [SRC] (SOURCE) to select the CD mode. 1 Press [u] (OPEN) to open the face plate. CQ-C8403N AF TA When a disc is already loaded ( lights), the disc will automatically be ejected. DISP PTY Operation Flow 2 Load a disc with the printed side facing up. The face plate closes automatically, and the unit recognizes the disc and starts playing automatically, too. Printed side 3 Select a desired portion.
¡ This unit does not support 8 cm discs. ¡ Do not use irregularly shaped discs. (a page 40) ¡ Do not use discs that have a seal or label attached. ¡ To avoid damaging the face plate, do not push it down or place objects on it while it is open. ¡ Do not pinch your finger or hand in the face plate when the face plate is in motion. ¡ Do not insert foreign matter into the disc slots. ¡ Refer to the section on “Notes on CD/CD Media (CD-ROM, CD-R, CD-RW)” (a page 40).
MP3/WMA Player When a disc is already loaded, press [SRC] (SOURCE) to select the MP3/WMA mode. 1 Press [u] (OPEN) to open the face CQ-C8403N AF TA plate. DISP PTY When a disc is already loaded ( will automatically be ejected. lights), the disc Operation Flow 2 Load a disc with the printed side facing 3 Select a desired portion. up The face plate closes automatically, and the unit recognizes the disc and starts playing automatically, too.
1 Press [MENU] to display the menu dis- RANDOM : Off (default) play. For using the remote control, hold down [SEL] (MENU) for 2 sec. or more. : Random playback (disc) DISP PTY FOLDER RANDOM : Off (default) 2 Press [}] or [{] to select a mode to be adjusted. : Random playback (folder) REPEAT : Off (default) DISP PTY : Playing the current file repeatedly 3 Press [BAND] (SET) to adjust. FOLDER REPEAT 4 Press [MENU] to confirm the adjustment.
MP3/WMA Player What is MP3/WMA? MP3 (MPEG Audio Layer-3) and WMA (Windows MediaTM Audio) are the compression formats of digital audio. The former is developed by MPEG (Motion Picture Experts Group), and the latter is developed by Microsoft Corporation. Using these compression formats, you can record the contents of about 10 music CDs on a single CD media (This figures refer to data recorded on a 650 MB CD-R or CD-RW at a fixed bit rate of 128 kbps and a sampling frequency of 44.1 kHz).
Supported file systems ISO 9660 Level 1/Level 2, Apple Extension to ISO 9660, Joliet, Romeo Note: Apple HFS, UDF 1.50, Mix CD and CD Extra are not supported. Compression formats (Recommendation: “Points to remember when making MP3/WMA files” on the previous page) Compression method Bit rate VBR Sampling frequency MPEG 1 audio layer 3 (MP3) 32 k – 320 kbps Yes 32, 44.1, 48 kHz MPEG 2 audio layer 3 (MP3) 8 k – 160 kbps Yes 16, 22.05, 24 kHz Windows Media Audio Ver.
Audio Setting Adjustment to each speaker and an optional subwoofer 1 Press [VOLUME] (PUSH SEL: SELECT) to display the AUDIO menu display. Balance adjustment (Setting range: L (left)15 to R (right) 15 and Center, Default: Center) q : Right enhanced w : Left enhanced Fader adjustment 2 Press [VOLUME] (PUSH SEL: SELECT) to select a mode to be adjusted. 3 Turn [VOLUME] AUDIO Menu Display clockwise or counterclockwise to adjust.
Function Setting 1 Press [MENU] to display the menu display. For using the remote control, hold down [SEL] (MENU) for 2 sec. or more. 2 MUTE KEY Setting [MUTE] buttons’ functions : Volume off (default) : Volume down by 10 steps DISP PTY English Adjustment to display on the FUNCTION menu : Volume down by 5 steps EXT.MUTE (External Mute) Press []] or [[] to display the FUNCTION menu.
Display Setting Adjustment to display on the DISPLAY menu GRAPHIC PATTERN 1 Press [MENU] to display the menu display. For using the remote control, hold down [SEL] (MENU) for 2 sec. or more. (Setting range: 5 types, Default: All) Switching by []] or [[] DISP PTY All: Sequential display from pattern A to D. Pattern A-D 2 Press []] or [[] to display the DISPLAY menu. 3 Press [}] or [{] to select a function to be adjusted.
You can edit the moving images and still images that are initially stored in the unit. You also can use the data that is downloaded from the Panasonic Web site and the data that is stored with a digital camera or other devices and processed with exclusive software, IMAGE STUDIO. See “Notes on Customize Function” (a page 34) as well. Note: Visit Panasonic Web site (http://panasonic.co.jp/pas/en/software/customize/index.html) for details.
Customize the Display (Customize Function) Note on Download Service At Customizing The download service may be suspended or stopped without advance notice. The download service is not available in some areas. Please visit the site below for further information. Panasonic Web site: (http://www.panasonic.co.jp/global/) Download site: Notes on IMAGE STUDIO ¡ This download service is not available in some areas. For details, please access the Panasonic website.
Check and take steps as described below. If the described suggestions do not solve the problem, it is recommended to take the unit to your nearest authorized Panasonic Service Centre. The product should be serviced only by qualified personnel. Please refer the checking and the repair to professionals. Panasonic shall not be liable for any accidents arising out of neglect of checking the unit or your own repair after your checking.
Troubleshooting Problem Some operations are not executable. Common (continued) No sound from speaker(s) The speaker channels are reversed between right and left. The sound field is not clear in the stereo mode. Central sound does not settled. The power fails unintentionally. Poor reception or noise Possible cause a Possible solution Some operations are not executable in particular modes such as menu mode. a Read the operating instructions carefully and cancel the mode.
Preset stations cannot be stored. The number of receivable stations is less than 6. a Move to an area where receivable stations number is maximum, and try presetting. English The number of auto preset stations is less than 6. Possible cause a Possible solution The contact of the battery lead is poor, or the battery lead is not always powered. a Make sure that the battery lead is connected securely, and preset stations again. PS does not appear even if an RDS station is tuned in to. (“NO PS” appears.
Troubleshooting Problem No playback or disc ejected CD Sound skipping or noise Sound skipping due to vibration Disc unejectable Possible cause a Possible solution The disc is inserted upside down. a Insert a disc correctly. There is a flaw or foreign material on the disc. a Remove the foreign material, or use a flawless disc. There is a flaw or foreign material on the disc. a Remove the foreign material, or use a flawless disc. The unit is not sufficiently secured.
The battery is inserted in the wrong direction. A wrong battery is inserted. aInsert a correct battery in the correct direction. English Possible cause a Possible solution The battery is weak. aReplace the battery with new one. No response to pressing buttons The aiming direction of the remote control unit is wrong. aAim the remote control unit at the sensor of the unit and press buttons. The sensor is exposed to direct sunlight.
Notes on CD-Rs/RWs Notes on CD/CD Media (CD-ROM, CD-R, CD-RW) Notes on Discs If you use commercial CDs, they must have either of these labels shown at right. Some copy-protected music CDs are not playable. TEXT How to hold the disc ¡ Do not touch the underside of the disc. ¡ Do not scratch on the disc. ¡ Do not bend the disc. ¡ When not in use, keep disc in the case. Printed side Do not use irregularly shaped discs.
Sampling Frequency DA Converter Pick-Up Type Light Source Wavelength Frequency Response Signal to Noise Ratio Total Harmonic Distortion Wow and Flutter Channel Separation 8 times oversampling 4 DAC System Astigma 3-beam Semiconductor laser 790 nm 20 Hz – 20 kHz (±1 dB) 96 dB 0.01 % (1 kHz) Below measurable limits 85 dB FM Stereo Radio Radio Frequency range Usable sensitivity Stereo separation 87.
Matsushita Electric Industrial Co., Ltd. Web Site : http://www.panasonic.co.
●Probieren Sie den Radiobetrieb vor dem Einbau mit Antenne und Lautsprechern aus. Exclusively operated with 12 V battery with negative (–) ground. Connect the power lead (red) very last. (for non-ISO connector) Connect the battery lead (yellow) to the positive (+) terminal of the battery or fuse block terminal (BAT). (for non-ISO connector) Strip about 5 mm of the lead ends for connection. Prenez contact avec un spécialiste pour le montage.
Wiring/Verdrahtung/Câblage/Bedrading Caution To prevent damage to the unit, do not connect the power connector until the whole wiring is completed. Vorsicht Um Beschädigung des Gerätes zu vermeiden, schließen Sie den Versorgungsstecker erst an, nachdem die gesamte Verdrahtung vollständig beendet wurde. Attention Ne pas introduire la prise d'alimentation secteur dans l'appareil tant que le câblage n'est pas complètement terminé afin de ne pas risquer d'endommager l'appareil.
System Upgrade Guidebook System-Upgrade-Handbuch Guide pratique de mise à niveau de système Systeemuitbreidingsgids Guidebok om systemuppgradering Guida per il potenziamento del sistema Guía de mejora del sistema Systemopgraderingsvejledning àÌÒÚÛ͈Ëfl ÔÓ ‡Ò¯ËÂÌ˲ ÒËÒÚÂÏ˚ Model: CQ-C8803N/ CQ-C8403N ¡For upgrading your system, read this manual carefully before use. This manual should be retained for future reference after read.
Safety Information ■ Read the operating instructions for the unit and all other components of your car audio system carefully before using the system. They contain instructions about how to use the system in a safe and effective manner. Panasonic assumes no responsibility for any problems resulting from failure to observe the instructions given in this manual. This pictograph intends to alert you to the presence of important operating instructions and Warning installation instructions.
❑ Keep the sound volume at an appropriate level. Keep the volume level low enough to be aware of road and traffic conditions while driving. ❑ Do not insert or allow your hand or fingers to be caught in the unit. To prevent injury, do not get your hand or fingers caught in moving parts or in the disc slot. Especially watch out for infants. ❑ This unit is designed for use exclusively in automobiles. ❑ Do not operate the unit for a prolonged period with the engine turned off.
About this Book Before Reading These Instructions This book is an instruction manual that explains how to operate your purchased head unit and its remote control as an accessory when the head unit is connected to optional devices. Head units to be targeted ¡ CQ-C8803N/C8403N All illustrations throughout this manual represent model CQ-C8403N unless otherwise specified.
Contents English ¡Safety Information ¡Before Reading These Instructions 2 4 ¡General ¡Disc Changer ¡iPod Control ¡Hands-Free Phone System 6 8 12 14 ¡Troubleshooting 16 As Needed Each Source Common Deutsch Français Nederlands Svenska Italiano Español Dansk êÛÒÒÍËÈ 2 18 34 50 66 82 98 114 130 CQ-C8803N/C8403N 5
General DVD Changer The optional adapter (Conversion Cable for DVD/CD Changer: CA-CC30N) allows you to connect the optional Panasonic DVD changer unit (CX-DH801N). For details, refer to the operating instructions for the DVD changer unit. (a page 8, 10) CD Changer The optional adapter (Conversion Cable for DVD/CD Changer: CA-CC30N) allows you to connect the optional Panasonic CD changer unit (CX-DP880N). For details, refer to the operating instructions for the CD changer unit.
CQ-C8403N AF TA DISP PTY Radio FM1, FM2, FM3, AM (LW/MW) (a Operating Instructions) English The source changes as follows every time [SRC] (SOURCE) is pressed. System-up Connector Device connected to the System-up Connector of the this unit When optional devices are connected: Shift to connected devices When an expansion module is connected: The devices connected to the ports 1 to 4 are activated in sequence after shifting to AUX2 (devices connected to the AUX terminal of the expansion module).
Disc Changer (When CDs or MP3 discs are loaded) Connected an optional CD changer or an optional DVD changer can be controlled by this unit. 1 Load a magazine (discs). When a magazine is already loaded, press [SRC] (SOURCE) to select the changer mode. CQ-C8403N AF TA DISP PTY The unit recognizes the magazine and starts playing automatically. 2 Select a desired portion. Disc selection Operation Flow [}]: Next disc [{]: Preceding disc Folder up/Down Only for DVD Changer Hold down for 2 sec. or more.
¡ This unit does not support the following through the CD changer. ¡MP3 playback. 1 Press [MENU] to display the menu display. DISP PTY 2 Press [}] or [{] to select a mode to be adjusted.
Disc Changer (when DVDs or VCDs are loaded) Connected an optional DVD changer (CX-DH801N) can be controlled by this unit. 1 Load a magazine (discs). When a magazine is already loaded, press [SRC] (SOURCE) to select the DVD changer mode. CQ-C8403N AF TA DISP PTY Operation Flow The unit recognizes the magazine and starts playing automatically. Notes: ¡ For DVD operations other than the above (i.e. DVD menu, closed caption, etc.), use the remote control unit supplied with the DVD changer.
English Repeat play can be set. For using the remote control, hold down [SEL] (MENU) for 2 sec. or more. CHAPTER REPEAT : Off (default) : Playing the current chapter repeatedly. DISP PTY TITLE REPEAT : Off (default) 2 Press [}] or [{] to select a mode to be : Playing the current title repeatedly. Note: The unit may not operate for some DVDs. 3 Press [BAND] ¡For a VCD insertion (SET) to adjust.
iPod Control Operation Flow Connection of the optional iPod adapter (Direct Cable for iPod) (CA-DC300N) allows users to operate the iPod including file selection and file sequence change with the buttons on this unit. 1 Connect the iPod. 2 Press [SRC] (SOURCE) to select the CQ-C8403N iPod mode. Playback starts. AF TA DISP PTY Note: If playback does not start, press [BAND] (y / 5). 3 Select a desired portion.
¡ The shuffle function of iPod corresponds to the RANDOM function of this unit. ¡ Connect this unit after turning down the volume of the iPod. ¡ “NO iPod” appears until the iPod is recognized after connecting the iPod, turning on the power of the main unit, or performing source selection on the main unit side. This indicates there is nothing wrong with the main unit. ¡ We do not guarantee all the operations of connectable devices. Random and Repeat play can be set.
Hands-Free Phone System Be sure to read “Safety Information” in the Operating Instructions for the Hands-Free Phone System before use. Connecting Hands-Free Phone System Preparation Connect the Hands-Free Phone System (CY-BT100N) and establish the pairing. Refer to the instruction manual for the Hands-Free Phone System for further information.
¡ The mute function is automatically canceled when receiving a call even at mute-on setting. ¡ This unit is not operable when receiving a call at power-off setting. ¡ We do not guarantee all the operations of connectable devices. Note: Speaker output is adjustable only when receiving calls. 1 English Notes: ¡ This item is not selectable by pressing [SRC] (PWR: POWER), but activated by receiving an incoming call. ¡ Only outline is described here.
Troubleshooting If You Suspect Something Wrong Check and take steps as described below. If the described suggestions do not solve the problem, it is recommended to take the unit to your nearest authorized Panasonic Service Center. The product should be serviced only by qualified personnel. Please refer the checking and the repair to professionals. Panasonic shall not be liable for any accidents arising out of neglect of checking the unit or your own repair after your checking.
solution a Possible Failure to communicatePossible with the cause Hands-Free Phone System a Check the connection to the Hands-Free Phone System. (a page 14) a Make sure that the pairing is successfully completed.
System Upgrade Guidebook Matsushita Electric Industrial Co., Ltd. Web Site : http://www.panasonic.co.
