Operating Instructions SDI Card Model No. AW-HHD870N Before operating this product, please read the instructions carefully and save this manual for future use.
Safety precautions WARNING: CAUTION • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. • THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VA S E S , S H A L L B E P L A C E D O N T H E APPARATUS.
For CANADA This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la class A est conforme à la norme NMB-003 du Canada. FCC Note: This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 10) Protect the power cord form being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings.
Contents Preface ................................................................................ 5 Mounting . ............................................................................ 9 Standard accessories . ........................................................ 5 Connection ........................................................................ 11 Warning/caution for safety ................................................... 6 Appearance ........................................................
Warning/Caution for safety WARNING CAUTION Refer all servicing to qualified personnel To reduce the risk of electric shock, don’t remove cover or back, unless you are a qualified personnel. Refer all mountings, connections, servicing to qualified service personnel. Do not drop the product, do not expose it to strong shock, or do not step on it, to prevent a fire and injuries. Do not install the product at a place full of moisture and dust, which may cause a fire and electric shock.
Precautions Power off before connecting or disconnecting cables Before plugging or unplugging the cables, be sure to switch power off. Operating temperature range Avoid using the product at a cold place below 14 °F (–10 °C) or at a hot place above 113 °F (+45 °C) because extremely low or high temperature will adversely affect the parts inside. Handle carefully. Do not drop the product, or subject it to strong shock or vibration. This is important to prevent trouble.
Major operating controls and their functions ZOOM/FOCUS connector SDI output connector [SDI OUT1, 2] This is the standard input connector for the lenses equipped with a remote control function for zoom focus. When using a Panasonic pan-tilt head (such as the AW‑PH360, AW-PH400, AW-PH405 or AW-PH650), use the LENS I/F connector on the pan-tilt head instead of this connector. Serial digital component signal can be output.
Mounting 1 Switch the camera off, and disconnect the power connector and other cables from the camera. Caution Be sure to ask your store, where you purchased the product, for mounting. Disconnect the camera power connector before mounting. Before handling the card, touch a metal part of the camera to discharge the static from the human body. An anti-static wrist strap is recommended for added safety. If you touch the card while you are still charged with static, it may cause trouble.
Rear panel Option card slot cover Card setscrews (6 mm) Rear panel setscrews (8 mm) SDI card - 10 -
Connection Before cable connection, switch power off. Use the AC adapter AW-PS510A for power supply. Use the power cable supplied with AW-HE870. For details on connecting individual devices, refer to the respective operating instructions. For details on operating individual devices, refer to the respective operating instructions. In case of using a remote operation panel AW-CB400 Zoom lens Video monitor, VTR etc.
Appearance Unit: inch (mm) 4-5/16 (109) 2-3/4 (70) 27/32 (21.
Specifications Power requirements: 12 V DC (supplied from camera) Power consumption: Approx. 2.2 W indicates safety information. Allowable temperature ranges: For storage: –4 °F to 140 °F (–20 °C to +60 °C) For guaranteeing operation: 14 °F to +113 °F (–10 °C to +45 °C) Operating humidity: 30 % to 90 % (without condensation) Dimensions: 27/32˝ 2-3/4˝ 4-5/16˝ [21.5 (W) 70 (H) 109 (D) mm] Weight: Approx. 0.22 lbs. (0.
PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY UNIT COMPANY OF PANASONIC CORPORATION OF NORTH AMERICA Headquarters: 3 Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-5300 EASTERN ZONE: 3 Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7196 WESTERN ZONE: 3330 Cahuenga Blvd. West, Los Angeles, CA 90068 (323) 438-3608 Government office: (201) 348-7587 Broadcast PARTS INFORMATION & ORDERING: 9:00 a.m. – 5:00 p.m. (PST) (800) 334-4881/24 Hr.
