OPERATING INSTRUCTIONS Personal Computer Model No. Getting Started (Basic Operations) Starting Up/Shutting Down........................................ 23 Using the Touch Pad................................................. 25 Using the Fn Key ...................................................... 26 Expanding Memory ................................................... 27 Setup Utility............................................................... 29 Useful Information Usage/Handling/Maintenance........
Customer’s Record Model No.*1 Dealer’s Name Serial No. or Code No. Dealer’s Address Date of Purchase *1 For the Model No., insert the 12 digit number (for example, CF-W4GWCZZBM) located on the bottom of the computer. Introduction Thank you for purchasing the Panasonic computer. Read this manual thoroughly for proper operation of your new computer. Copyright This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved.
Read Me First For U.S.A. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Read Me First Preparations Getting Started 6. If trouble is experienced with this equipment, for repair or warranty information, please contact Panasonic Corporation of North America at DIAL TOLL FREE 1800-LAPTOP5 (1-800-527-8675). If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. 7. There are no user serviceable parts contained in this equipment. 8.
Industry Canada This product complies with RSS210 Industry Canada. Operation is subject to the following two conditions; (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This product (local network devices) for the band 51505250 MHz is only indoor usage to reduce potential for harmful interference to co-channel Mobile Satellite systems.
Read Me First Information to the User Preparations Getting Started This product and your Health This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones.
For Europe (For models with a “CE” mark on the bottom of the computer) Contact: Panasonic Services Europe A Division of Panasonic Marketing Europe GmbH Panasonic Testing Centre Network connection.
Read Me First Precautions Usage Handling Avoid Extreme Heat and Cold Do not store or use the computer in locations exposed to heat, direct sunlight, or extreme cold. Avoid moving the computer between locations with large temperature difference. Operation: 5 °C to 35 °C {41 °F to 95 °F} Storage: -20 °C to 60 °C {- 4 °F to 140 °F} Preparations Getting Started Avoid Direct Sunlight on the LCD Panel The LCD panel should not be exposed to direct sunlight or ultraviolet light.
Do not pull or insert the DC plug if your hands are wet May result in electrical shock. Insert the AC plug completely If the plug is not inserted completely, fire due to overheating or electrical shock may result. z Do not use a damaged plug or loose electrical socket. Do not place metal objects or containers of liquid on top of the computer z If water or other liquid spills, or if paper clips, coins, or other metal objects get inside the computer, fire or electrical shock may result.
Read Me First Precautions (Battery Pack) z Care should be exercised with regard to the following in order to avoid the possibility of overheating, fire or damage. Preparations Getting Started Avoid Heat Do not throw the battery pack into a fire or expose it to excessive heat. Keep Articles Away Do not place the battery pack together with articles such as necklaces or hairpins when carrying or storing.
Usage Precautions / About Notations Usage Precautions When closing the disk cover z Press down near the drive power/open switch (position of the arrow) to ensure that the cover is locked. About Notations NOTE NOTE provides a useful fact or helpful information. CAUTION CAUTION indicates a condition that may result in minor or a moderate degree of injury. Enter This illustration means pressing the Enter key. Fn+F5 This illustration refers to pressing and holding the Fn key, then pressing the F5 key.
How to Use this Manual Manual Types and Contents Using the hard copy Using the onscreen manual Operating Instructions (This manual) Reference Manual (PDF format) Important Tips (PDF format) Getting Started Preparations Windows Help This manual explains startup methods and basic operations required when using the computer for the first time.
Names and Functions of Parts Names Functions/Reference A Function Keys Press a key in combination with the Fn key to execute the function allocated to that key. Î page 26 B Keyboard — C LEDs Î page 15 D Touch Pad Î page 25 Power Switch/ Power Indicator F Wireless LAN Switch G Economy Mode (ECO) Indicator Slide the switch for about one second to turn the power on.
Names and Functions of Parts Names A DC-IN Jack Connect the AC adaptor. Î page 17 B External Display Port Connect the external display cable. If the mini port replicator is connected to the computer, connect the external display to the external display port on the mini port replicator. You cannot use the external display port on the computer. Î “External Display” in onscreen Reference Manual Preparations C Getting Started Functions/Reference Mini Port Replicator EXT.
Confirm the Status Using the LEDs Indicators Power indicator z Not lit: Power off / Hibernation mode z Green: Power on z Blinking green: Standby mode Caps Lock indicator z This indicator lights green when the Caps Lock key is pressed: Subsequent non-shifted input is capitalized. NumLk indicator (Ten-key mode) z This indicator lights green when the NumLk key is pressed: Part of the keyboard (see figure below) will function as a ten-key numeric input.
First-time Operation Explains operating procedures from the time of purchase to the start of first Windows operations. 1 Confirm the inclusion of all parts. Preparations Make sure the parts shown in the figure have been supplied. If any of these items are missing or is not working properly, contact your technical support office. 2 Read the LIMITED USE LICENSE AGREEMENT (Î page 54). Be sure to read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computer’s packaging.
4 Open the display. 5 Connect your computer to a power outlet. Preparations A Press and hold the latch (B) located at the front. B Lift open the display. z Do not open the display wider than necessary (140° or more), and do not apply excessive pressure to the LCD. Do not open or close the computer holding the edge of the LCD segment. Hold the C (below) segment to open or close the computer. z Be sure the AC adaptor is connected until completing the first-time use operation.
First-time Operation 7 Setup Windows. Preparations Getting Started Moving the cursor or clicking buttons can be performed with the touch pad (A) and left button (B). z During operations, it may take some time before the next screen is displayed. Wait, and do not press any keys, or touch the touch pad, etc. A At [Welcome to the Windows XP Setup Wizard], click [Next]. B After reading the agreement, click [I accept this agreement], then click [Next].
Create "User Accounts" to recognize this computer's user. z If you make mail settings or execute other operations (password reset disk (Î page 21) etc.) before creating the user account, you will be unable to use mail history or settings. Create the user account at this time. A Click [start]*1 - [Control Panel] - [User Accounts] - [Create a new account]. *1 Immediately after Windows setup, the screen may show a display as though [start] has been clicked (i.e.
First-time Operation 9 Change the drive letter*1 for the internal DVD-ROM & CD-R/ RW drive. Preparations Getting Started In some cases, the drive letters for the DVD-ROM & CD-R/RW drive or connected devices (SD memory cards, external drives, etc.) may change when the DVD-ROM & CD-R/RW drive power is turned on or off. To prevent these letters from changing, we recommend that you allocate the drive letter for the DVD-ROM & CD-R/RW drive from the latter half of the alphabet (e.g., "L drive").
Password Reset Function When you have forgotten a Windows log-on password Preparations A Click [start] - [Control Panel] - [Performance and Maintenance] - [System] [Hardware] - [Device Manager]. B Click [View] - [Devices by connection]. C Click for the following items in order.
First-time Operation Roles of Icons on the Notification Area The notification area icons below are only examples. Icons Names and roles Reference ® Intel Graphics Media Accelerator Driver for Mobile icon － (Use for screen settings) Preparations Getting Started or or or or Intel® PROSet/Wireless Software icon (Turn wireless LAN on/off and use to set wireless LAN connections) Wireless LAN icon (Use to confirm the status of the wireless LAN power and to switch IEEE802.11a between enable/disable.
Starting Up/Shutting Down Starting Up 1 Open the display. A Press and hold the latch (A) located at the front. B Lift open the display. z Do not open the display wider than necessary (140° or more), and do not apply excessive pressure to the LCD. Do not open or close the computer holding the edge of the LCD segment. Turn your computer on. Slide the power switch and hold it for approximately one second until the power indicator turns on before releasing it.
Starting Up/Shutting Down • If there is no disk set in the DVD-ROM & CD-R/RW drive, the drive power will be turned off. (Î “DVD-ROM & CD-R/RW Drive” in onscreen Reference Manual) z When the CPU temperature rises, the computer may not power on to prevent the CPU from overheating. Should this happen, allow the computer to cool down then switch the power on again. If the computer still does not power on, contact your technical support office.
Using the Touch Pad Use the touch pad to move the cursor on the screen and perform computer operations. A. Work Surface (touch pad) B. Left Button C. Right Button Function Operation Moving the Cursor Move the tip of your finger lightly over the work surface. Tapping/Clicking tapping or clicking z A right-click: Can only be performed by clicking the right button.
Using the Fn Key If you press a key for a character or symbol contained in a key while pressing the Fn key, the function for the character or the symbol contained in that key will be executed. z Details of various functions Î “Using the Fn Key” in onscreen Reference Manual z When using with the Fn key and the Ctrl key functions interchanged. (Î page 31) Press the Ctrl key instead of the Fn key for the desired Fn function.
Expanding Memory Depending on the computer, you can expand the RAM module (sold separately). The increase in memory will improve the processing speed of Windows and other application software. (Effects may differ depending on your usage conditions.) z Use recommended RAM module products. Do not use non-recommended RAM modules. Non-recommended RAM modules may not operate properly, and may cause damage to your computer. Some non-recommended RAM modules may overheat, causing the cover to warp.
Expanding Memory C Insert the module parallel to the slot and press firmly until the gold terminals are no longer visible. z If the RAM module is difficult to insert, do not force it. Check once more to ensure that the module is positioned correctly. z The slot may be damaged if the following procedure is performed without inserting the module firmly. D Press the RAM module down until the right and left hooks (G) lock into place.
Setup Utility The Setup Utility sets the computer's boot-up operating environment, i.e. passwords, startup drive, etc. The following six menu items are available: [Information], [Main], [Advanced], [Security], [Boot], [Exit] 1 Turn on or restart the computer. 2 Press the F2 key while [Panasonic] boot screen is displayed soon after the computer begins the startup procedure. When the password is set, the screen shown at left will be displayed. Enter your password, and press the Enter key.
Setup Utility How to use the screen Getting Started A. You can select menu items by moving the cursor with the Í key and the Î key. B. If there are several selectable items, you can choose the desired item by pressing the Ï key and the Ð key. The color of the selected item will change. C. You can display the submenu by pressing the Enter key on the item shown in reverse display. D. When the submenu is displayed, you can select items by pressing the Ï key and the Ð key. E.
Information Menu (An underline indicates the factory default settings) Language • Select the language for displaying the Setup Utility. English Japanese Model No. Serial No. CPU Type CPU Speed BIOS Embedded Controller System Memory Primary Master To display and confirm information. These items cannot be selected or changed. Optical Drive • When [CD/DVD Drive Power] has been set to [Off] in [Main] menu, [Power Off] is displayed.
Setup Utility (An underline indicates the factory default settings) CD/DVD Drive Power • You can set the drive power to [On] or [Off] when the computer is started up. • When set to [Off]: • From the next time you start the computer, you will be unable to start up from DVD-ROM & CD-R/RW drive. The disk cover cannot be opened until Windows has started. To start up from the DVD-ROM & CD-R/RW drive (give preference to [USB CDD] (internal DVD-ROM & CD-R/RW drive) in the [Boot] menu), set this to [On].
Getting Started (An underline indicates the factory default settings) Disable Password on boot • Select whether you will need to input ([Enable]) or not ([Disable]) the Supervisor Password Enable or the User Password on booting. Disable SD Startup • Select whether to use an SD memory card instead of entering the password on booting Enable ([Enable]) or not ([Disable]). • When registered SD memory card, this is set to [Enable]. • Cannot be set when [Password on boot] is set to [Disable].
Setup Utility z To move a device from [Excluded from boot order] to [Boot priority order] (or vice versa): Select the device using the Ï or Ð key, and press the X key. The device you have moved will appear at the end of the list when moving a device from [Excluded from boot order] to [Boot priority order]. Set the boot order as required. Getting Started NOTE z When starting up from the internal DVD-ROM & CD-R/RW drive, confirm the following settings. • [CD/DVD Drive Power] is [On] in the [Main] menu.
Usage/Handling/Maintenance Usage Environment z Place the computer on a flat stable surface. Do not place the computer to tip over. When the computer receives extremely strong shock after disk may become inoperable.
Usage/Handling/Maintenance CAUTION Useful Information Operation z Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface, e.g., discoloration. In addition, do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface. z Do not directly add or spray water or detergent onto the computer. If liquid enters the inside of the computer, it may cause it to work improperly or be damaged.
Wireless LAN Precautions Do not use wireless LAN on airplanes, in hospitals, or in other locations where wireless LAN signals may affect the operation of devices in the vicinity z Abide by instructions regarding use in airplanes and hospitals. z If you intend to use the computer in the environments described above, turn off the wireless LAN power.
Windows/Antivirus Protection Windows Depending on the settings in Windows, installed applications, drivers, menus and other displays may be inoperable. In some cases, certain functions, such as the password reset disk (Î page 21), may not operate. In this case, refer to the items below, and the applied items from the problem-solving section of this manual and onscreen Reference Manual, Windows Help (Î page 12), and the software application and driver’s operating instructions, etc.
Security Center/Antivirus Protection Use the Windows Security Center function to protect Windows from damage by computer viruses, etc. z What is Windows Security Center? The Windows Security Center allows centralized management of Windows security information, and monitors antivirus measures and other Windows security settings to ensure optimum safety. Use the Windows Security Center function to protect your computer from damage by viruses, etc.
Windows/Antivirus Protection The Pop-up Blocker In Windows XP, security functions have been strengthened with regard to Web contents. One of these is the "Pop-up Blocker," which may prevent some Web pages from being displayed. Computer Viruses Users are advised to purchase the latest versions of virus protection software and use them regularly. We recommend you run the software: z When booting your computer. z After receiving data.
Using CD/DVD Before using the drive z Do not expose the DVD-ROM & CD-R/RW drive to excessive smoke that may leave a residue, e.g. oil smoke, or tobacco smoke. Doing so could shorten the life of the drive lens. Internal DVD-ROM & CD-R/RW drive connection interface z The internal DVD-ROM & CD-R/RW drive uses a USB connection. When removing PC Cards, SD memory cards, or other USB devices, the internal DVD-ROM & CDR/RW drive is displayed as one of the [USB Mass Storage Device].
Use of Peripheral Devices/Internal Hard Disk When Using Peripheral Devices Pay strict attention to the following points to avoid damage to the computer, peripheral devices, cables, etc. Also, in addition to following this manual and the onscreen Reference Manual, carefully read the instruction manuals for the peripheral devices being used. z Use only peripheral devices that conform to the computer’s specifications.
List of Error Codes When turning on the computer, if one of the following error codes or messages is displayed, follow the instructions shown below. If the problem persists, or if the error code or message displayed is not shown here, contact your technical support office. Action 0211: Keyboard error z If an external keyboard is connected, disconnect these devices. 0251: System CMOS checksum bad - Default configuration used An error has occurred in the memory that stores the Setup Utility settings.
Dealing with Problems (Summary) When a problem occurs, refer to this page. The “Reference Manual” also contains detailed information. If a problem appears to be related to a software application, read the software related manual. If you still cannot troubleshoot the problem, contact Panasonic technical support office. You can use the PC Information Viewer to check the computer’s usage status.
Problems with Starting Up, Shutting Down, and Standby and Hibernation Mode Cannot boot from internal DVDROM & CD-R/RW drive z Check to make sure that the bootable CD is set properly. z Run the Setup Utility, and confirm the following settings. • [Legacy USB Support] is set to [Enable] in the [Advanced] menu. • [CD/DVD Drive Power] is set to [On] in the [Main] menu. • [USB CDD] is the first device shown in [Boot priority order] in the [Boot] menu.
Dealing with Problems (Summary) Problems with Starting Up, Shutting Down, and Standby and Hibernation Mode The computer does not power off (Windows does not shut down) z If a peripheral is connected, disconnect it, and then shut down. If it is possible to shut down when the peripheral is disconnected, then there may be a problem with the peripheral. Consult the peripheral manufacturer. z Also check the items in "No response".
Problems with Display Screen is too dark or becomes darker z Press the Fn+F2 key. This makes the screen lighter. z If the screen becomes darker after disconnecting the AC adaptor: The computer has different set brightness levels for when the AC adaptor is connected and for when it is not connected. If you press the Fn+F2 key to increase the brightness when the AC adaptor is not connected, this brightness is maintained, and determines the brightness next time the AC adaptor is disconnected.
Dealing with Problems (Summary) Problems with Display Nothing appears on the external dis- z Check that the external display cables are correctly connected. play, or the display is not correct z Check that the external display is turned on. z Check that the external display settings are correct. z When an external display not compatible with the power-saving mode is used with the computer, the display may not function correctly when the computer enters the power-saving mode.
Problems with Battery The battery indicator is lights red z The battery level is very low (the charge is approx. 9% or less). z Connect the AC adaptor. You can use the computer when the indicator light is orange. If you do not have an AC adaptor, save your data and power off your computer. After replacing the battery pack with a fully charged one, turn your computer on again. The battery indicator is blinking z If blinking red: Quickly save your data and power off your computer.
Reinstalling Software When reinstallation procedure is performed, the contents of the hard disk will be erased. Be sure to back up data on your hard disk to another media or to an external hard disk before running the reinstallation procedure. The reinstallation procedure will return the computer to its original condition. z If you have created partitions for data, the data may be erased or become corrupt as a result of the reinstallation procedure.
Reinstalling 1 Connect the AC adaptor. Do not interrupt the reinstallation procedure before completion, for example by turning off the computer or pressing the Ctrl + Alt + Del key, as this may prevent Windows from starting up, or may cause data to be lost so that the reinstallation procedure cannot be executed. 2 Change the settings in the Setup Utility. Make the following settings. z Return settings to the status at the time of purchase. z Change settings to enable startup from DVD-ROM & CD-R/RW drive.
Reinstalling Software When the message [The Backup function has been enabled. If [Recovery] or [Erase HDD] is executed, the Backup function will be disabled, and your Backup data will be lost.] appears, press the Y key. B If you agree, press the 1 key. If you do not agree, press the 2 key. z If you press the 1 key the menu will be displayed. z If you press the 2 key the reinstallation will be canceled. C Make a selection from the menu.
E The message "[Recovery] is complete" will be displayed. Remove the Product Recovery DVD-ROM, and press any key to shut down the computer. 4 Return the Setup Utility settings to their default values. Return the Setup Utility to its settings at the time of purchase to ensure proper setup of Windows. A Turn on the computer, and press the F2 key while [Panasonic] boot screen is displayed. The Setup Utility will start up. If the password has been set, enter the Supervisor Password, and press the Enter key.
LIMITED USE LICENSE AGREEMENT THE SOFTWARE PROGRAM(S) (“PROGRAMS”) FURNISHED WITH THIS PANASONIC® PRODUCT (“PRODUCT”) ARE LICENSED ONLY TO THE END-USER (“YOU”), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE. Matsushita Electric Industrial Co., Ltd. (“MEI”) has developed or otherwise obtained the Programs and hereby licenses their use to you.
Contrat de licence d'usage limité Le(s) logiciel(s) (les “Logiciels”) fournis avec ce produit Panasonic® (le “Produit”) sont exclusivement concédés en licence à l'utilisateur ultime (“vous”), et ils ne peuvent être utilisés que conformément aux clauses contractuelles cidessous. En utilisant les logiciels, vous vous engagez de manière définitive à respecter les termes, clauses et conditions des présentes. Matsushita Electric Industrial Co., Ltd.
Hard Disk Backup Function The hard disk backup function creates a backup area (storage area) on the hard disk. This area is to back up (store) hard disk contents or restore backed up contents to their original locations. By backing up the data on your hard disk to a backup area, you can protect your data from loss or damage resulting from operational errors or other factors.
• Requires availability of at least half of the entire hard disk. Without sufficient space available, the backup area cannot be created. • When the backup area is created, the usable hard disk capacity will be reduced to less than half. • The backup area cannot be accessed from Windows. For this reason, backed up data cannot be copied to CD-R or other removable disk media. • When the hard disk backup function is executed, data in the backup area will be overwritten.
Hard Disk Backup Function Select [2], enter the partition size (GB), and press the Enter key. • You can cancel this operation by pressing the 0 key. • The data partition size will be the maximum settable size less the number entered above. The maximum settable size will differ depending on models. H At the confirmation message, press the Y key. The backup area is then created.
B Select [Exit] menu, then select [Hard Disk Backup / Restore] and press the Enter key. At the confirmation message, select [Yes], and press the Enter key. C Select the operation to be executed from the menu. (1) Press the 1 key to execute [1. [Backup]]. (When dividing the hard disk into two partitions, select the backup method at next screen.) (2) At the confirmation message, press the Y key. The backup process will begin.
When Disposing of This Computer When disposing of or transferring ownership of this computer, erase all data on the hard disk in order to prevent the theft of hard disk data. Even if you delete data or initialize the hard disk through normal Windows commands, data can still be read using special software. In order to erase all data, either have the data erased by a specialist (at a charge) or use the hard disk data erase utility (included).
Important Information Set the Product Recovery DVD-ROM, and execute step D. D Press the F10 key. At the confirmation message, select [Yes] and press the Enter key. The Setup Utility will close, and the computer will restart. If [Enter Password] is displayed during the following procedure, enter the Supervisor Password or User Password. When the message [The Backup function has been enabled...] appears, press the Y key.
Specifications z Main Specifications Model No. CF-W4GWCZZBM CF-W4GCCZZBM CPU/ Secondary cache memory Intel® Pentium® M Processor Ultra Low Voltage 753 (1.20 GHz, 2 MB*1 L2 cache, 400 MHz FSB) Chip Set Intel® 915 GMS Express chip set Main Memory 512 MB*1, DDR2 SDRAM (1024 MB*1 Max.) Video Memory UMA (128 MB*1 Max.)*2 Hard Disk Drive 40 GB*3 DVD-ROM & CD-R/RW Drive USB 2.0 connection interface, Buffer underrun error prevention function: Supported zDVD-RAM*6: 2X speed (4.7 GB*3)/1X speed (2.
z Main Specifications Model No. CF-W4GWCZZBM Power Consumption *21 Approx. 35 W *22 CF-W4GCCZZBM / Approx. 40 W (maximum when recharging in the ON state) Physical Dimensions (W × H × D) 268 mm × 24.9 mm (at the front)/44.3 mm (at the rear) × 210.4 mm (excluding protrusion) {10.6 " × 1.0 " / 1.8 " × 8.3 "} Weight*23 Approx. 1290 g {2.8 lb.
Specifications *22 Rated power consumption. Average value. May differ depending on models. *24 Operations of this computer are not guaranteed except for the pre-installed OS. *25 Preinstalled B’s CLiP does not support CD-R. *26 The Product Recovery DVD-ROM is required. *23 z Wireless LAN Data Transfer Rates IEEE802.11a: 54/48/36/24/18/12/9/6 Mbps (automatically switched)*27 IEEE802.11b: 11/5.5/2/1 Mbps (automatically switched)*27 IEEE802.
Index Also, refer to onscreen Reference Manual. Some explanations that are not described in this manual may be described in onscreen Reference Manual. (Î page 12) A Antivirus Measures ........... 39 I Important Tips .................. 12 B Battery Indicator................ 15 Dealing with Problems .................................... 49 M Maintenance .................... 35 C Caps Lock ........................ 15 Clicking ............................ 25 D Display Dealing with Problems .................
Memo 66
As an ENERGY STAR® Partner, Matsushita Electric Industrial Co., Ltd. has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Outline of the International ENERGY STAR® Office Equipment Program The international ENERGY STAR® Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment.
