Operating instructions

10
CAUTION
If the computer is connected to the cradle, connect the AC adaptor and the LAN cable to the jack and
●
port on the cradle. You cannot use the LAN port on the computer. Note that the AC adaptor can also be
connected to the DC-IN jack of the computer.
Do not connect/disconnect peripheral devices in sleep (
●
Windows 7
) / standby (
Windows XP
) or hiberna-
tion.
Windows XP
●
If a printer that is connected to a USB port is disconnected, devices connected to the other USB ports
may stop functioning.
If this occurs, restart the computer.
When using the USB 2.0 port, confirm that [USB Port] is set to [Enable] in the [Advanced] menu of the
●
Setup Utility on the computer.
For more information about the settings and preparations of the peripheral devices, refer to the peripheral
●
devices’ own operating instructions.
When connecting the external display to either of the ports, lines or letters may blur. In that case, lower
●
the resolution.
Connect headphones to the computer or to the cradle. Do not connect two sets of headphones to the
●
computer and the cradle.
Connecting / Disconnecting