Personal Computer OPERATING INSTRUCTIONS Model No. CF-T2 Series Getting Started XP 2000 Read Me First.................................................. 3 First-time Operation ......................................
Customer’s Record Model No. *1 Dealer’s Name Serial No. or Code No. Dealer’s Address Date of Purchase *1 For the Model No., insert the 12 digit number (for example, CF-T2AWAZZGH) located on the bottom of the computer. Introduction Getting Started Thank you for purchasing the Panasonic computer. Read the operating instructions thoroughly for proper operation of your new computer.
Warning This apparatus must be earthed for your safety. To ensure safe operation the three-pin plug must be inserted only into a standard three-pin power point which is effectively earthed through the normal household wiring. Extension cords used with the equipment must be three-core and be correctly wired to provide connection to earth. Wrongly wired extension cords are a major cause of fatalities.
Read Me First Declaration of Conformity (DoC) “Hereby, we and Panasonic Testing Centre (Europe) GmbH (PTC), declares that this Personal Computer is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC.” Hint: If you want to get a copy of the original DoC of our products which relates to the R&TTE, please contact to our web address: http://doc.panasonic-tc.de Getting Started Network connection.
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: Precautions Usage 1.Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 2.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3.
Read Me First Precautions (Battery Pack) Care should be exercised with regard to the following in order to avoid the possibility of overheating, fire or damage. Getting Started Avoid Heat Do not throw the battery pack into a fire or expose it to excessive heat. Keep Articles Away Do not place the battery pack together with articles such as necklaces or hairpins when carrying or storing.
Do not expose your computer to shock. Use care when handling your computer, shock may damage your hard disk or make your software applications and data unusable. Do not power off your computer while software applications are running or hard disk drive indicator ( ) is on. Properly shut Windows*1 down to avoid problems. Save all valuable data to disks. Backing up data to disks will limit damage should trouble occur to your computer or should you inadvertently change or erase data.
Read Me First Computer Viruses Getting Started Users are advised to purchase the latest versions of virus protection software and use them regularly. We recommend you run the software: • After booting your computer. • After receiving data. We recommend that you check data received on disks or from external sources, such as data downloaded from the Internet, e-mail, etc. (For compressed files, uncompress them before running a check).
A Carrying Cloth B C This computer has been designed so as to minimize shock to the LCD and hard disk drive, etc., but no warranty is provided against such trouble. Therefore, as a precision instrument, be extremely careful in the handling. Do not carry the computer while the display is open, or carry it by gripping the display or the cabinet around the display (see figure A). When closing the display, ensure that the latch is positioned correctly in the slot ( page 10).
First-time Operation Read the steps below to help you learn what parts are included, and to gain an understanding of some basic computer-related operations. the inclusion of all parts. 1 Confirm Make sure the parts shown in the figure have been supplied. If any of these items are missing or is not working properly, contact your technical support office ( Getting Started AC adaptor ..........1 AC Cord ...............1 Battery Pack ........
5 Connect your computer to a power outlet. DC-IN Jack DC IN 16V LCD The battery pack will be charged automatically. Charging Time: Approx. 3 hours (Varies depending on the usage conditions.) CAUTION Getting Started Be sure the AC adaptor is connected until completing Step 8 on page 13. When using the computer for the first time, do not connect any peripheral device except the battery pack and AC adaptor to the computer. Handling the AC adaptor Do not twist or pull the AC power cord forcefully.
First-time Operation 5 Enter your computer name and administrator password and then select [Next]. CAUTION Remember this password! If the password is forgotten, Windows cannot be operated. You can create a password reset disk beforehand ( page 15). NOTE Getting Started It may take two to three minutes until the next screen is displayed. Wait, and do not press any keys, or touch the touch pad, etc. 6 At [Networking Settings], select [Typical settings], then select [Next].
Windows 2000 CAUTION Do not press any key or move the touch pad until [Windows 2000 Professional Setup] is displayed. 1 At [Welcome to the Windows 2000 Setup Wizard], select [Next]. 2 After reading the agreement, select [I accept this agreement] or [I don’t accept this agreement], then select [Next]. If [I don’t accept this agreement] is selected, the Windows setup will be aborted. 3 Select settings for your region, then select [Next]. 4 Enter your name and organization and then select [Next].
First-time Operation Setting Languages Windows XP ·English ·Traditional Chinese ·Simplified Chinese To change the settings of language, make the settings in the following procedure: [start] - [Control Panel] - [Date, Time, Language, and Regional Options] - [Regional and Language Options] Getting Started [Regional Options] - [Standards and formats]: The currencies, and so on, will be displayed according to the locale.
NOTE Getting Started Some UI (User Interface) strings remain in English even if the user’s UI is set to another language. This is because certain strings in some component areas do not work with MUI yet (i.e. remain in English) due to the complexity of the technologies (The main areas include: all 16-bit programs, registry keys and values, and strings in INF files.) This affects about 3% of the User Interface - most of the areas affect administrative tools.
Starting Up/Shutting Down Starting Up Latch 1 Open the display. 2 1 2 Slide the latch located at the front. Lift open the display. CAUTION 1 Do not open the display wider than necessary (160° or more). Do not apply excessive pressure to the LCD. Also, do not hold the LCD when opening or closing the display. 2 Turn your computer on. Slide the power switch and hold it for approximately one second until the power indicator turns on before releasing it.
3 Log on to Windows. Windows XP After confirming that the hard disk drive indicator ( ) has turned off, select the user and input the password, then select . Until the correct password is entered, the computer will not operate. Windows 2000 After confirming that the hard disk drive indicator ( ) has turned off, input the user name and password, then select [OK]. Until the correct user name and password are entered, the computer will not operate. 4 Select your application.
Starting Up/Shutting Down Shutting Down (power off your computer) This procedure is for shutting down the computer without using the standby or hibernation function ( “Standby/Hibernation Functions”). 1 Save important data and close each application. 2 Windows XP Select [start] - [Turn Off Computer]. Windows 2000 Select [Start] - [Shut Down]. 3 Windows XP Select [Turn Off]. Windows 2000 Select [Shut down], then select [OK]. Your computer will power off automatically.
Touch Pad Use the touch pad to move the cursor on the display and perform normal computer operations. CAUTION By design the touch pad is to be used with a finger tip only. Therefore, do not use any implement which causes damage on the work surface. Function Work Surface Operation Moving the Cursor Move the tip of your finger lightly over the work surface.
Reference Manual The Reference Manual and the Important Tips can be accessed on your computer. When a printer is connected, these manuals can also be printed. The Reference Manual explains functions for you to make greater use of the computer, such as how to add peripheral devices, how the Setup Utility works, and other useful information. (Refer to the cover of this manual for a list of the main contents included.
List of Error Codes 0200 Failure Fixed Disk Fixed disk in not working or not configured properly. Check to see if fixed disk is attached properly. Run Setup. Find out if the fixed-disk type is correctly identified. 0211 Keyboard error Keyboard not working. 0212 Keyboard Controller Failed Keyboard controller failed test. May require replacing keyboard controller. 0213 Keyboard locked - Unlock key switch Unlock the system to proceed.
Dealing with Problems (Summary) When a problem occurs, refer to this page. The “Reference Manual” also contains detailed information. If a problem appears to be related to a software application, read the software related manual. If you still cannot troubleshoot the problem, contact your technical support office. ( page 33) You can use the PC Information Viewer to check the computer's usage status.
Starting Up (continued) When the administrator password is forgotten Set the password again in the following procedure. Windows XP If you have created a password reset disk ( page 15), a message is displayed when you fail to correctly enter the password. Follow the message’s instructions and set the password again by using the password reset disk. If you have not created a password reset disk, after reinstalling, setup Windows and then set the password again.
Dealing with Problems (Summary) Display (continued) An afterimage appears (e.g.
Reference Manual The Reference Manual is not displayed Is Acrobat Reader installed? If Acrobat Reader is not installed, run the following*1 in [start]*2 - [Run] to reinstall the program. When installing the program, do not change the installation destination folder. If the destination folder is changed, the Reference Manual cannot be opened from [start]*2 menu. *1 English : [c:\util\reader\m\acroreader51_enu_full.exe] Traditional Chinese : [c:\util\reader\tc\acroreader51_cht_full.
Dealing with Problems (Summary) Check the Computer's Usage Status You can use the PC Information Viewer to check the computer’s usage status, and use this information when calling technical support office for advice. (If you have not logged on with administrator authority, some information will be displayed as [Not Found].) Running PC Information Viewer Windows XP 1 Select [start] - [All Programs] - [Panasonic] - [PC Information Viewer] - [PC Information Viewer].
Reinstalling Software When reinstall procedure is performed, the contents of the hard disk will be erased. Be sure to back up any critical data on your hard disk to another media or to an external hard disk before running the reinstall procedure. The reinstall procedure will return the computer to its original condition. • If you have created partitions for data, the data may be erased or become corrupt as a result of the reinstall procedure.
Reinstalling Software CAUTION Do not interrupt the reinstall procedure before completion, for example by turning off the computer or pressing Ctrl + Alt + Del , as this may prevent Windows from starting up, or may cause data to be lost so that the reinstall procedure cannot be executed. When a message appears instructing you to insert the next CD, insert the recovery CD showing the next number in the sequence, and then select [OK].
LIMITED USE LICENSE AGREEMENT THE SOFTWARE PROGRAM(S) (“PROGRAMS”) FURNISHED WITH THIS PANASONIC® PRODUCT (“PRODUCT”) ARE LICENSED ONLY TO THE END-USER (“YOU”), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE. Matsushita Electric Industrial Co., Ltd. (“MEI”) has developed or otherwise obtained the Programs and hereby licenses their use to you.
Hard Disk Data Erase Utility This computer is equipped with a utility for erasing hard disk data. When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the theft of hard disk data following the steps below. The hard disk data erase utility erases data using an “overwriting” method, but there is a possibility that due to malfunctions or other operational errors, data may not be completely erased.
Names and Functions of Parts LED Indicators Speaker To adjust the volume: Fn + F5 / Fn + F6 Speaker on/off : Fn + F4 ( LCD Keyboard “LED Indicators”) Power status Battery pack status Caps Lock Numeric Key (NumLk) Scroll Lock (ScrLk) Hard disk drive status Function Keys For information on the key combinations available. ( “Key Combinations”). Power Switch Before using the computer for the first time, carefully read the [LIMITED USE LICENSE AGREEMENT]. If you agree to the conditions, remove the seal.
Specifications Main Specifications Model No.
Technical Support Office If you have a problem running your computer or using your equipment, contact the following: Shun Hing Technology Co., Ltd. Technical Division Appendix 9th Floor, Peninsula Centre, 67 Mody Road, Hong Kong.
Appendix Memo 34
Appendix
As an ENERGY STAR® Partner, Matsushita Electric Industrial Co., Ltd. has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Outline of the International ENERGY STAR® Office Equipment Program The international ENERGY STAR® Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment.
