Operating instructions

16
Getting Started
First-time Operation
A
2 Turn on the computer.
Press the power switch (A). The power indicator lights.
CAUTION
●
Do not press the power switch repeatedly.
●
The computer will be forcibly turned off if you press and hold the power switch for 4
seconds or longer.
●
Once you turn off the computer, wait for 10 seconds or more before you turn on the
computer again.
●
Do not perform the following operation until the drive indicator turns off.
•
Connecting or disconnecting the AC adaptor
•
Pressing the power switch
•
Touching the screen, external keyboard or external mouse
●
When the CPU temperature is high, the computer may not start up to prevent overheating
of the CPU. Wait until the computer cools down, and then turn the power on again. If the
computer does not power on even after cooling down, contact Panasonic Technical Support
(
è
pages 35-39).
●
Any changes from the default setting of the Setup Utility must not be made until the
“First-time Operation” procedure is completed.
3 Setup Windows.
Follow the on-screen instructions.
●
The computer restarts several times. Do not touch the keyboard or mouse, and wait
until the drive indicator
has turned off.
●
After the computer is turned on, the screen remains black or unchanged for a while,
but this is not a malfunction. Wait for a moment until the Windows setup screen
appears.
●
During setup of Windows, use the mouse and clicking to move the cursor and to
click an item.
●
Setup of Windows will take approximately 5 minutes / 20
minutes. Go to the next step, confirming each message on the display.
●
You can set the Wireless Network after the setup of Windows is complete.
If “Choose a network” is displayed, you can select “Connect to a
wireless network later”.
“Join a wireless network” screen may not appear.
CAUTION
●
You can change the user name, password, image, and security setting after setup of
Windows.
●
Remember your password. If you forget the password, you cannot use the Windows.
Creating a password reset disk beforehand is recommended.
●
Do not use the following words for user name : CON, PRN, AUX, CLOCK$, NUL, COM1 to
COM9, LPT1 to LPT9, @, &, space. In particular, if you create a user name (account name)
that includes the “@” mark, a password will be requested at the log-on screen, even if no
password has been set. If you try to log on without entering a password, “The user name
or password is incorrect.” may be displayed and you will not be able to sign in /
log on to Windows (
è
page 25).
4 Restart the computer.
A Display “Charm” and click .
B Click [Power] - [Restart].
A Click (Start) - - [Restart].
DFQW5823ZA_CF-H2mk2_OI_CND_M.indb 16 2013/07/26 13:54:25