® Personal Computer OPERATING INSTRUCTIONS CF-27 Series Getting Started Read Me First ................................................. 5 First-time Operation ........................................ 6 95 Getting Started Contents Troubleshooting This manual can be accessed on your computer. Please refer to page 15 on how to access the Reference Manual.
Customer's Record Model No.* Dealer's Name Serial No. or Code No. Dealer's Address Date of Purchase *For the Model No., insert the 11 digit number (for example, CF-27RJ48AAM) located on the bottom of the computer. Introduction Thank you for purchasing the Panasonic computer. Please read the operating instructions thoroughly for proper operation of your new computer. Illustrations in this manual NOTE: NOTE provides a useful fact or helpful information.
For U.S.A. Federal Communications Commission Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Precautions (Battery Pack) Care should be exercised with regard to the following in order to avoid the possibility of liquid leakage, overheating, or bursting. Avoid Heat Do not throw the battery pack into a fire or expose it to excessive heat. Keep Articles Away Do not place the battery pack together with articles such as necklaces or hairpins when carrying or storing. Do Not Disassemble Do not insert sharp objects into the battery pack, expose it to bumps or shocks, deform, disassemble, or modify it.
Read Me First Do not expose your computer to shock. Please use care when handling your computer, shock may damage your hard disk or make your software applications and data unusable. Do not power off your computer while software applications are running or HDD indicator ( ) is on. Properly shut Windows* down to avoid problems ([Start] - [Shut Down] ). Save all valuable data to floppy disks.
First-time Operation Please read the steps below to help you learn what parts are included, and to gain an understanding of some basic computer-related operations. 1 Confirm the inclusion of all parts Make sure the parts shown in the figure have been supplied. If any of these items are missing or is not working properly, please contact Panasonic Technical Support.
Getting Started
First-time Operation 4 Read the LIMITED USE LICENSE AGREEMENT ( page 23) Before removing the seal covering the power switch, please read the LIMITED USE LICENSE AGREEMENT. Removal of this seal indicates agreement to the terms specified. After you have agreed to the terms, you may turn your computer on. Power Switch your computer on 5 Turn Slide the power switch toward the rear of the computer and hold it for approximately one second until the power indicator ( ) turns on before releasing it.
7 Input the correct date, time and time zone and press [Close]. You can also complete these settings at a later time. 8 If you wish to complete the printer settings, press [Next]. If not, press [Cancel]. NOTE Simply follow the on-screen instructions. You can also complete these settings at a later time. Label-side up Insert the shutter-side headfirst. Press [Next] to install Internet Explorer. Simply follow the on-screen instructions.
Starting Up/Shutting Down Starting Up 4 1 2 1 Open the display 1 Pull the carry handle forward. 2 Slide the latch toward the rear of the computer and hold it with one finger. 3 Lift up the latch with another finger. 4 Lift open the display. 3 Latch Power Switch 2 Turn your computer on Slide the power switch toward the rear of the computer and hold it for approximately one second until the power indicator turns on before releasing it.
Select your application 3 You are able to start working on your computer. NOTE The power saving function is factory set, so if there is no input from a key, the touch pad, or the external mouse for two minutes, the power to the LCD is cut (ECO mode). The LCD will resume operation when the touch pad is used or a key is pressed. [System Devices] in [Start] - [Settings] - [Control Panel] - [System] - [Device Manager] may contain a device or devices bearing an exclamation mark or question mark.
Starting Up/Shutting Down Basic Operation Wheel Indicates an operation applicable to the Microsoft® IntelliMouseTM Wheel mode. Original Indicates an operation applicable to the original mode. Function Moving the Cursor Tapping/Clicking Touch Pad Operation Wheel Original Move the tip of your finger lightly over the surface.
Function Wheel Scroll in various directions of a document (move the mouse slightly while holding down the wheel) Zoom* Wheel Magnify/reduce the display of a document. (rotate the wheel while holding down Ctrl ) Data Zoom* Operate while holding down the two buttons. Magnify Ctrl + Reduce Wheel Display or hide a document, or perform operations to return to or proceed with Internet Explorer.
Starting Up/Shutting Down NOTE The double-tapping speed of the touch pad cannot be changed, even if the setting for [Doubleclick Speed] in [Start] - [Settings] - [Control Panel] - [Mouse] - [Tap and Buttons] is changed. Handling the Touch Pad Operation When using a key combination such as Fn + F5 , do not touch the touch pad. If a key combination is used while the pad is being touched, the function of the key combination will not work.
About the Reference Manual The Reference Manual can be accessed on your computer. When a printer is connected, it is also possible to print. This manual explains functions for you to make greater use of the computer, such as how to add peripheral devices, how the Setup Utility works and other useful information. CAUTION When you read the Reference Manual, it is necessary to install the Acrobat® Reader 3.0.
Operation
List of Error Codes The following is a list of the messages that BIOS can display. Most of them occur during POST. Some of them display information about a hardware device, e.g., the amount of memory installed. Others may indicate a problem with a device, such as the way it has been configured. If your system displays one of the messages marked below with an asterisk (*), write down the message and contact Panasonic Technical Support.
Dealing With Problems When a problem occurs, please refer to this page. The Reference Manual also contains detailed information. If you still cannot troubleshoot the problem, please contact Panasonic Technical Support. Starting Up The power indicator or battery indicator is not lit or is displayed [POST Startup Error(s)] is displayed Troubleshooting Please input your password. If you have forgotten it, contact Panasonic Technical Support.
No display after powering on At the time of purchase, the display setting is preset for an external display. If you connect an external display, the screen is displayed on the external display. When there is no display to an external display, • Check your cable connection to the external display. • Confirm your display is powered on. • Check the settings for your external display. Try changing the display by pressing Fn + F3 .
Reinstalling Software Before Reinstallation Preparing You will need the FIRSTAID CD, CD-ROM included in the Windows 95 System Pack and the FIRSTAID FD you made earlier. NOTE If you have not created the FIRSTAID FD, you can create by selecting [Create FIRSTAID FD] in [Start] - [Programs] - [Panasonic]. If you can not create this disk, please contact Panasonic Technical Support. The CD-ROM pack (CF-VCD271) and FDD cable (CF-VCF271) are required for the following reinstallation procedure.
5 6 7 When the message [Press F2 for Setup] is dis- Device manager 1 played, press F2 and then run the Setup Utility. Press F9 . At the confirmation message, select [Yes] and press Enter . Select [Power] menu and set [Power Management Mode] to [Off] and [Power Switch] to [Off]. Press F10 . At the confirmation message, select [Yes] and press Enter . The computer will reboot, and will then return to the display shown in step1.
Reinstalling Software Power management Infrared 27 Delete the check mark for [When powered by AC power] and [When powered by batteries] in [Control Panel] - [Power] - [Disk Drives], then press [OK]. 40 Select [Control Panel] - [Add New Hardware]. 41 Press [Next] at the [Add New Hardware Wizard]. 42 Select [No], then press [Next]. 43 Select [Infrared] in [Hardware types] and press [Next]. 44 Press [Next], and press [Next] again.
LIMITED USE LICENSE AGREEMENT THE SOFTWARE PROGRAM(S) ("PROGRAMS") FURNISHED WITH THIS PANASONIC® PRODUCT ("PRODUCT") ARE LICENSED ONLY TO THE END-USER ("YOU"), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH THE LICENSE TERMS DESCRIBED BELOW.YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE. Matsushita Electric Industrial Co., Ltd. ("MEI") has developed or otherwise obtained the Programs and hereby licenses their use to you.
Contrat de licence d'usage limité Le(s) logiciel(s) (les "Logiciels") fournis avec ce produit Panasonic® (le "Produit") sont exclusivement concédés en licence à l'utilisateur ultime ("vous"), et ils ne peuvent être utilisés que conformément aux clauses contractuelles cidessous. En utilisant les logiciels, vous vous engagez de manière définitive à respecter les termes, clauses et conditions des présentes. Matsushita Electric Industrial Co., Ltd.
Names and Functions of Parts Function Keys ( "Key Combinations") LCD Touch Pad page 11 Infrared Communication Port LED Indicators ( ( "Infrared Data Communications") "LED Indicators") DC-IN Jack Power Switch Before using the computer for the first time, carefully read the [LIMITED USE LICENSE AGREEMENT]. If you agree to the conditions, remove the seal. Carrying Handle For enhanced portability and in -the -field efficiency.
Names and Functions of Parts Speaker Ram Module Slot ( To adjust the volume*, select on the taskbar, then [Volume Control]. * You may also use the function keys to adjust the volume: Fn + F5 or F6 Speaker on/off : Fn + F4 Battery Pack MP Release Button ( MP RELEASE "Using a Multimedia Pocket Device") Hard Disk Drive Switch for Optional device Appendix This switch is reserved.
Specifications Main Specifications Model No. CPU Cache Memory (second cache memory) Main Memory (Expandable to) Video Memory LCD Type Displayed Colors*1 Hard Disk Drive (including about 200 MB used CF-27RJ48AAM ® CF-27RG48AAM Pentium Processor with MMX TM technology 266 MHz 32 KB (512 KB) 32 MB (96 MB Max. ) 2 MB 12.1" (TFT) 10.4" (TFT) 256/65536/262144 colors (640 x 480 dots/800 x 600 dots) 4 GB*2 specifically by the system) *1 *2 800 x 600 16-color resolution is not supported.
As an ENERGY STAR® Partner, Panasonic has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Outline of the International ENERGY STAR® Office Equipment Program The international ENERGY STAR® Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption.
