OPERATING INSTRUCTIONS Personal Computer Model No. CF-19 series Read Me First ............................................................. 3 Description of Parts .................................................. 11 First-time Operation .................................................. 15 Useful Information On-screen Manual .................................................... 20 Handling and Maintenance ....................................... 22 Reinstalling Software ...................................
Introduction Thank you for purchasing this Panasonic product. For optimum performance and safety, please read these instructions carefully. Terms and illustrations in these instructions CAUTION : NOTE : Enter : Fn + F5 : (Start) - [All Programs] : [start] - [Run] : : : Conditions that may result in minor or moderate injury. Useful and helpful information. Press [Enter] key. Press and hold [Fn] key, and then press [F5] key. Click (Start), and then click [All Programs]. Click [start], and then click [Run].
Read Me First Models for U.S.A. FCC RF Exposure Warning: This equipment is provided with PC Card slot that could be used with wireless transmitters, which will be specifically recommended when they become available. Other third-party wireless transmitters have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements.
Read Me First Getting Started 4. If your telephone equipment cause harm to the telephone network, the telephone company will notify you in advice that temporary discontinuance of service may be required. But if advice notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. 5.
7-M-2 Industry Canada This product complies with RSS210 Industry Canada. Operation is subject to the following two conditions; (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Industrie Canada Cet équipement est conforme à la norme CNR-210 d’Industrie Canada.
Read Me First Important Safety Instructions / Importantes Mesures De Sécurité Getting Started When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm.
Safety Precautions Getting Started The following safety precautions must be observed during all phases of the operation, usage, service or repair of any Personal Computer or Handheld Computer incorporating wireless WAN modem. Manufacturers of the cellular terminal are advised to convey the following safety information to users and operating personnel and to incorporate these guidelines into all manuals supplied with the product.
Read Me First For Used in Motor Vehicle /Pour L’utilisation Dans Un Véhicule Motorisé Getting Started Warning: Notebook Computer may be installed in a motor vehicle and visible to the driver only if used to support vehicle related functions such as vehicle information, system control, rear or side observation and navigation.
Precautions *1 *2 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and Class1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36. As defined by the European Medical Device Directive (MDD) 93/42/EEC.
Getting Started Read Me First Take a Break of 10-15 Minutes Every Hour Using this product for long periods of time may have detrimental health effects on the eyes or hands. Do Not Turn the Volume Up to Loud When Using Headphones Listening at high volumes that overstimulate the ear for long periods of time may result in loss of hearing. Use the Modem with a Regular Telephone Line Connection to an internal phone line (on-premise switches) of a company or business office, etc.
Getting Started Description of Parts A: Wireless LAN Antenna Reference Manual “Wireless LAN” B: C: D: E: The wireless LAN switch may turn off depending on the reception. Stylus/Digitizer pen Holder Touch Pad LED Indicator : Wireless ready This indicator lights when Wireless LAN, Bluetooth, and/or Wireless WAN are connected and ready. It does not necessarily indicate the On/Off condition of the wireless connection.
Description of Parts Left side Getting Started Rear side T Bottom Q R S K L M N O P A: DC-IN Jack B: USB Port Reference Manual “USB Devices” C: IEEE 1394 Interface Connector Reference Manual “IEEE 1394 Devices” D: Modem Port Reference Manual “Modem” E: LAN Port Reference Manual “LAN” F: SD Memory Card Indicator (Blinking: During access) Reference Manual “SD Memory Card” G: SD Memory Card Slot Reference Manual “SD Memory Card” H: Wireless
N: Security Lock A Kensington cable can be connected. For further information, read the manual that comes with the cable. O: External Display Port Reference Manual “External Display” P: Serial Port Q: RAM Module Slot Reference Manual “RAM Module” R: External Antenna Connector S: Expansion Bus Connector Reference Manual “Port Replicator / Car Mounter” T: Camera Remove the protection seal on the camera before using the camera.
Description of Parts Attaching the hand strap and the shoulder strap (option) Attach the hand strap to any two of the corners (A) using the screws. You can connect the shoulder strap (B) to the hand strap. (The illustration is an example.) CAUTION Getting Started Do not use the strap to carry a heavier weight than the computer. Otherwise the strap may become loose by itself. Do not use the strap if it becomes worn or damaged. 14 CF-19mk4(DFQW5354ZA)_OI_US.
First-time Operation Preparation A Check and identify the supplied accessories. If you do not find the described accessories, contact Panasonic Technical Support ( page 37). • AC Cord . . . . . . . 1 • Battery Pack . . . 1 • AC Adaptor. . . . . 1 • Stylus . . . . . . . . . . . . . . . . . . . 1 • Tether . . . . . . . . . 1 Model No: CF-VZSU58U or CF-VZSU48U • Soft Cloth . . . . . . 1 Model No: CF-VNP003U • Digitizer pen . . . . . . . .
First-time Operation 2 Opening the Display A Pull up the part (A) and release the latch. B Lift open the display. 3 Connect your computer to a power outlet. The battery charging starts automatically. CAUTION Getting Started Do not disconnect the AC adaptor and do not switch the wireless switch to on until the first-time operation procedure is completed. When using the computer for the first time, do not connect any peripheral device except the battery pack and AC adaptor.
During setup of Windows, use the touch pad and keyboard to move the cursor and to click an item. CAUTION Do not use the following words for user name: CON, PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9, @. In particular, if you create a user name (account name) that includes the “@” mark, a password will be requested at the log-on screen, even if no password has been set. If you try to log on without entering a password, “The user name or password is incorrect.
First-time Operation A Run [Tablet PC Settings]. Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings]. B Click [Calibrate]. C Select [Pen input]. D Using the digitizer pen, touch each of the “+” target marks one by one, and then click [Yes]. Perform the calibration for the orientation to be used. Getting Started A Run [Tablet and Pen Settings]. Double-click or click [start] - [Control Panel] - [Printers and Other Hardware] - [Tablet and Pen Settings].
NOTE You can create an additional partition using remaining unallocated space or newly creating unallocated space. To delete a partition, right-click the partition and click [Delete Volume] in the step C. Getting Started To change the partition structure You can shrink a part of an existing partition to create unallocated disk space, from which you can create a new partition. This computer has a single partition in the default setting. (Start) and right-click [Computer], then click [Manage].
On-screen Manual You can access the Reference Manual and the Important Tips on the computer screen. When you access the Reference Manual and the Important Tips for the first time, the License Agreement of the Adobe Reader may be displayed. Read it carefully and select [Accept] to proceed. Reference Manual The Reference Manual contains the practical information to help you fully enjoy the computer’s performance. To access the Reference Manual: Double-click Alternatively click on the desktop.
5 Set the cover and battery pack. 1 3 4 2 Tighten the screws in the order of 1 to 4. Important Tips The Important Tips will provide you with the battery information so that you can use the battery pack in the optimum condition to obtain longer operation time. To access the Important Tips: Double-click (Start) - [All Programs] - [Panasonic] - [On-Line Manuals] - [Important Tips]. Double-click on the desktop.
Handling and Maintenance Operation environment Place the computer on a flat stable surface. Do not place the computer upright or turn it over. If the computer is exposed to an extremely strong impact, it may become damaged.
Preventing your computer from unauthorized use via wireless LAN/Bluetooth/Wireless WAN Before using wireless LAN/Bluetooth/Wireless WAN, make the appropriate security settings such as data encryption. Maintenance To clean the LCD panel Use the soft cloth included with the computer. (For further information, refer to “Suggestions About Cleaning the LCD Surface” Reference Manual “Touchscreen” / “Dual Touch”.
Reinstalling Software Reinstalling software will return the computer to the default condition. When you reinstall the software, the hard disk data will be erased. Back up important data to other media or an external hard disk before reinstallation. CAUTION Hard disk Do not delete the partition with boot files on the hard disk. The disk space in the partition is not available to store data.
15 Perform the “First-time Operation” ( page 16). 16 Start the Setup Utility and change the settings as necessary. 17 Perform Windows Update. 9 Press 1 to execute [1. [Recovery]]. 10 Press 1 to select [1. Yes, I agree to the provisions above and wish to continue!]. 11 Select the settings. [2]: Enter the size of operating system partition and press Enter. (The size of data partition will be determined by subtracting the operating system partition size from the maximum size.
Troubleshooting (Basic) Follow the instructions below when a problem has occurred. There is also an advanced troubleshooting guide in the “Reference Manual”. For a software problem, refer to the software’s instruction manual. If the problem persists, contact Panasonic Technical Support ( page 37). You can also check the computer’s status in the PC Information Viewer Reference Manual “Troubleshooting (Advanced)”). ( Starting Up Cannot start up. The power indicator or battery indicator is not lit.
Starting Up The date and time are incorrect. Make the correct settings. Click (Start) - [Control Panel] - [Clock, Language, and Region] - [Date and Time]. Click [start] - [Control Panel] - [Date, Time, Language, and Regional Options] - [Date and Time]. If the problem persists, the internal clock battery may need to be replaced. Contact Panasonic Technical Support ( page 37). When the computer is connected to LAN, check the date and time of the server. The 2100 A.D.
Troubleshooting (Basic) Entering Password On the [Enter Password] screen, the password cannot be entered. The computer may be in ten-key mode. lights, press NumLk to disable the ten-key mode, and then If the NumLk indicator input. Even after entering the pass)/ Locked word ( )/Type your ( password, is displayed again. The computer may be in ten-key mode. If the NumLk indicator lights, press NumLk to disable the ten-key mode, and then input. The computer may be in Caps Lock mode.
Display The cursor cannot be controlled properly. Operate the following steps. A Set [GPS] to [Disable] in the [Advanced] - [Serial Port Settings] of the Setup Utility. B Press F10 and select [Yes] at the confirmation message, and press Enter . The computer will restart. C Log on to Windows as an administrator. D Click (Start) and input “c:\util\drivers\gps\GPSVista.reg” in [Start Search], and press Enter . E Click [Yes], click [Yes] and click [OK]. Then restart the computer.
Troubleshooting (Basic) Others No response. Press Ctrl + Shift +Esc to open Task Manager and close the software application that is not responding. An input screen (e.g., password input screen at startup) may be hidden behind another window. Press Alt + Tab to check. Slide the power switch for four seconds or longer to shut down the computer, and then slide the power switch to turn it on. If the application program does not work normally, uninstall and reinstall the program.
LIMITED USE LICENSE AGREEMENT THE SOFTWARE PROGRAM(S) (“PROGRAMS”) FURNISHED WITH THIS PANASONIC PRODUCT (“PRODUCT”) ARE LICENSED ONLY TO THE END-USER (“YOU”), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE. Panasonic Corporation has developed or otherwise obtained the Programs and hereby licenses their use to you.
Contrat de licence d’usage limité Le(s) logiciel(s) (les “Logiciels”) fournis avec ce produit Panasonic (le “Produit”) sont exclusivement concédés en licence à l’utilisateur ultime (“vous”), et ils ne peuvent être utilisés que conformément aux clauses contractuelles cidessous. En utilisant les logiciels, vous vous engagez de manière définitive à respecter les termes, clauses et conditions des présentes.
Specifications This page provides the specifications for the basic model. The model number is different according to the unit configuration. To check the model number: Check the bottom of the computer or the box the computer came in at the time of purchase. To check CPU speed, memory size and the hard disk drive (HDD) size: Reference Manual “Setup Utility”) and select [Information] menu.
Specifications Main Specifications Operation Environment Temperature: 5 °C to 35 °C {41 °F to 95 °F} Humidity: 30% to 80% RH (No condensation) Storage Environment Temperature: -20 °C to 60 °C {-4 °F to 140 °F} Humidity: 30% to 90% RH (No condensation) Operating System Genuine Windows® 7 Professional Genuine Microsoft® Windows® XP Professional Service Pack 3 with Advanced Security Technologies (NTFS File System) Genuine Microsoft® Windows® XP Tablet PC Edition Service Pack 3 (NTFS File System) Utility Pr
*13 *14 *15 *16 *17 *18 *19 *20 *21 *22 *23 *24 20-M-1-1 Performance of the two batteries is the same though their specifications differ. Varies depending on the usage conditions. Measured at LCD brightness: 60 cd/m2 Varies depending on the usage conditions, or when an external device is attached. Approx. 0.9 W when the battery pack is fully charged (or not being charged) and the computer is OFF.
LIMITED WARRANTY For U.S.A. Panasonic Solutions Company - Worldwide Product Warranties Section 1: Limited Warranty - Hardware Panasonic Solutions Company (referred to as “Panasonic”) will repair the products listed below with new or rebuilt parts, free of charge in the U.S.A. or other Panasonic approved location for the period specified below from the date of original purchase in the event of a defect in materials or workmanship. These warranties are extended solely to the original purchaser.
Section 2 - Limited Warranty - Software Panasonic Solutions Company (referred to as “Panasonic”) warrants to you only that the disk(s) or other media on which the Programs are furnished will be free from defects in material and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof to you, as evidenced by your purchase receipt. This is the only warranty Panasonic makes to you.
LIMITED WARRANTY For Canada PANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTY Coverage – Panasonic Canada Inc. (“PCI”) warrants to you, the first end user customer, this computer product (excluding software media), when purchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under normal use, subject to the terms set forth below, during the period of warranty coverage specified.
GARANTIE LIMITÉE Pour le Canada GARANTIE LIMITÉE – ORDINATEURS ET PÉRIPHÉRIQUES PANASONIC Couverture – Panasonic Canada Inc. (« PCI ») garantit à l’acheteur original que ce produit informatique (à l’exclusion des supports des logiciels) est, au moment de sa vente par PCI ou d’un revendeur agréé par PCI, exempt de défauts de pièces et de fabrication dans les conditions normales d’utilisation, et ce, pendant la période de couverture de la garantie, sous réserve des modalités décrites ci-dessous.
As an ENERGY STAR® Partner, Panasonic Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. By enabling available power management settings, Panasonic computers enter a low-power sleep mode after a period of inactivity, saving the user energy. To learn more about power management, please visit the web site: www.energystar.gov/index.cfm?c=power_mgt.
