User manual

11
English
CQ-C7405W
Note: Adjust the clock when “ADJUST” appears on the
display.
1
Press [MENU] to display the menu
display.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
2
Press []] or [[] to display the
DISPLAY menu.
3
Turn [VOL] to select “CLOCK ADJ”.
For using the remote control, use [{] or [}].
4
Press [PUSH SEL], and the clock
adjustment screen appears.
For using the remote control, use [BAND] (SET).
5
Adjust the setting value.
[[]
: Adjusting minutes
[]] :
Adjusting hours
q : Forward
w :
Backward
6
Press [PUSH SEL], and the menu
screen resumes.
For using the remote control, use [BAND] (SET).
7
Press [MENU] to close the menu screen.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
You may need to set the following depending on the
devices to be connected.
Using Subwoofer
¡ Subwoofer level adjustment (a page 26)
¡ Subwoofer low pass filter (a page 26)
The following functions are activated when the Security
Function is ON. (a page 27)
¡ The security indicator lights up when removing the
face plate.
¡ The alarm sounds and the message appears on the
screen to warn you to remove the face plate at ACC
off.
Security Indicator
Preparation
Security Function
Setting
Other SettingsClock adjustment