Panasonic Broadcast BT-LT900A Menu Information
01.BT-LH900P(VQT0F30-2)English 05.1.25 10:05 AM ページ11 How to use the on-screen menus Four kinds of information—menus, status displays, image control settings and battery voltage—can be displayed on the screen. Menu display [MAIN MENU] 1MARKER VIDEO CONFIG SYSTEM CONFIG OSD CONFIG GPI INPUT SELECT CONTROL MENUEXIT XWSEL 4 4 4 4 4 4 4 This display appears when the MENU/EXIT button is pressed. If no further action is taken for the next 120 seconds, the display will be automatically cleared.
01.BT-LH900P(VQT0F30-2)English 05.1.25 10:05 AM ページ12 How to use the on-screen menus Image control display [CONTRAST] 50 The image control information is displayed when an image has been adjusted using the image controls. (Refer to page 6) It appears when a control has been pressed in so that it has popped out or when an adjustment is made by turning an already popped out control. It is cleared when a control is pressed again and returned to its original position.
01.BT-LH900P(VQT0F30-2)English 05.1.25 10:05 AM ページ13 Menu operations Menu operations 1 4 When the MENU/EXIT button is pressed, the main menu appears on the screen. Use the HD ZOOM/X button and BLUE/W button to change the setting, and press the FUNCTION/ENTER button to enter the change. Alternatively, the change will be canceled when the MENU/EXIT button is pressed instead. Displayed in green.
01.BT-LH900P(VQT0F30-2)English 05.1.25 10:05 AM ページ14 User data This monitor enables the menu settings and screen values which have been adjusted by the image controls to be saved in five user data files which can then be loaded as required.
01.BT-LH900P(VQT0F30-2)English 05.1.25 10:05 AM ページ15 MAIN MENU Menu configuration MAIN MARKER VIDEO CONFIG GAMMA SELECT FILM GAMMA COLOR TEMP.
01.BT-LH900P(VQT0F30-2)English 05.1.25 10:05 AM ページ16 MAIN MENU Menu items MARKER Item Setting Description MARKER SELECT MENU GPI For setting whether the marker display settings are to be performed using the menu or from the GPI connector. MENU: The operations are performed using the menu. Operations from the GPI connector are canceled. GPI: The operations are performed from the GPI connector. The settings established using the menu are canceled.
01.BT-LH900P(VQT0F30-2)English 05.1.25 10:05 AM ページ17 MAIN MENU Types of markers 16:9 markers (These appear when HD signals or when SD signals with a 16:9 aspect ratio are supplied.) Markers are displayed only in the form of vertical lines. The shaded areas indicate what is set by the MARKER BACK item. 80% area markers 4:3 markers (These appear when SD signals with a 4:3 aspect ratio are supplied.) Dotted lines are displayed as the markers.
01.BT-LH900P(VQT0F30-2)English 05.1.25 10:05 AM ページ18 MAIN MENU VIDEO CONFIG Item GAMMA SELECT GPI NORMAL FILM TYPE1 TYPE2 Description For setting the gamma mode. GPI: This is the GPI setting. For details, refer to “REMOTE specifications” (page 22). NORMAL: The normal gamma mode is established. FILM: The film mode that supports the Varicam digital cine camera is established. The actual film mode setting can be changed using the FILM GAMMA item listed next.
01.BT-LH900P(VQT0F30-2)English 05.1.25 10:05 AM ページ19 MAIN MENU SYSTEM CONFIG Item BACKLIGHT Setting 0 : 60 FUNCTION WFM HD ZOOM OSD CONFIG Description For adjusting the backlight brightness to a level from 0 to 60. The higher the setting, the brighter the backlight. WFM ON/OFF HV DELAY UNDEF For setting the function to be allocated to the FUNCTION/ENTER button. WFM ON/OFF: The Y signal (luminance) waveforms are displayed. HV DELAY: The blanked parts of the images are displayed.
01.BT-LH900P(VQT0F30-2)English 05.1.25 10:05 AM ページ20 MAIN MENU INPUT SELECT Item Setting Description Item Setting Description SDI1 *1 OFF ON For setting whether the SDI 1 signals can be selected when the channels are to be switched using the INPUT button. OFF: The SDI 1 signals cannot be selected. ON: The SDI 1 signals can be selected. SDI2 *1 OFF ON For setting whether the SDI 2 signals can be selected when the channels are to be switched using the INPUT button.
01.BT-LH900P(VQT0F30-2)English 05.1.25 10:05 AM ページ21 MAIN MENU INPUT SELECT Item FORMAT Setting AUTO 1080/60I 1080/50I 1080/30P 1080/25P 1080/24P 1080/24PsF 1035/60I 720/60P 576/50I 480/60P 480/60I CONTROL Description For selecting the signals whose input is to be accepted in the YPBPR mode and in the RGB mode.
