Datasheet

ManualsBrandsPANASONIC ManualsSwitches & ButtonsLimit switch 220 Vdc, 380 Vac 6 A Tappet momentary IP67 1 pc(s)

COMPACT SIZE

LIMIT SWITCHES

DL Mini

Limit Switches

(with forced contact opening mechanism)

An economic compact limit switch equipped with a forced contact opening

mechanism and excellent environment proofing (IP67).

(Roller arm) + (Conduit connector)

CHARACTERISTICS

1. Forced contact opening mechanism

When the limit switch is ON, the contact

is forced open by the N.C. contact

through the cam movement.

2. Conforms to EN standard

(EN50047)

3. Uses a unit system

Any combination of actuator, head block,

and unit block is possible. The units are

also sold separately, making mainte-

nance easy.

4. Hinged cover for easy wiring

5. Protective construction (IP67), and

wide operating temperature range

(–30°C to +80°C –22°F to +176°F)

TYPICAL APPLICATIONS

General plant facilities such as food pro-

cessing, light machinery such as packag-

ing machines, and assembly lines.

PRODUCT TYPE

1. Basic products 2. Blocks

Part No.

PG typePF type

AZD1050AZD1000

Actuator

Roller Lever

AZD1051AZD1001

Push Plunger

AZD1052AZD1002

Roller Plunger

AZD1054AZD1004

Roller Arm

AZD1058AZD1008

Adjustable Roller Arm

AZD1053AZD1003

Adjustable roller arm (50 dia. rubber roller)

AZD1057AZD1007

Adjustable rod (2.6 dia.)

AZD1059AZD1009

Roller lever (vertical action)

3. Conduit connector

Product name

Product name Part No.

Type of actuators

Roller Lever AZD1800

Roller Arm AZD1804

Adjustable Roller Arm AZD1808

Head block

Main block

For plunger

PF type

PG type

AZD1820

AZD1001

AZD1051

For arm type

PF type

PG type

AZD1104

AZD1154

Part No.

PF type conduit connector AZD1830

FOREIGN STANDARDS

Standards Applicable product Part No.

CSA

TÜV

File No. : E122222

Ratings : 6A 380V AC Pilot duty A300

Product type : All models

File No. : LR55880

Ratings : 6A 380V AC Pilot duty A300

Product type : All models

File No. : J9551205

Ratings :

AC-15 2A/250V~ Pilot duty A300

Product type : All models

Order by standard part No.

Cover 

mounting 

screw

Hinged 

cover

Body

Hand block

Actuator

Main block

Notes: 1. Type of conduit size: PF type (G1/2), PG type (PG13.5)

2. PG is a size standard used in Europe.

Note: The conduit connector is for cables.

Rubber seals with an inside diameter of 9 and 11 are

attached.

04/2005

Summary of content (8 pages)

PAGE 1
COMPACT SIZE LIMIT SWITCHES DL Mini Limit Switches (with forced contact opening mechanism) An economic compact limit switch equipped with a forced contact opening mechanism and excellent environment proofing (IP67). CHARACTERISTICS 1. Forced contact opening mechanism When the limit switch is ON, the contact is forced open by the N.C. contact through the cam movement. 4. Hinged cover for easy wiring Cover mounting screw Main block Hinged cover Actuator r Body Hand block 2.
PAGE 2
DL (AZD1) PRODUCT COMBINATION [Basic products] Roller lever Push plunger Roller plunger Adjustable roller arm (50 dia.
PAGE 3
DL (AZD1) WIRING DIAGRAM Terminals Internal circuit 13 DL 14 N.O. N.C. N.O. 11 12 N.C. DIMENSIONS mm inch Head block 43 1.693 32 1.260 17 .669 AZD1820 15.6 dia. .614 9 .354 2.5 .098 M5 0.8 M.197 .031 20 .787 General tolerance: ±0.4 ±.016 Roller lever type +0.5 10 0 +.020 .394 0 Pretravel 4 max. .157 11 .433 12 dia. 5 Nylon roller .472 9.2 .362 Resin-made push plunger Operating position 37±0.8 1.457±.031 9±0.2 .354±.008 4.3±0.1 .169±.004 20±0.1 .787±.004 22±0.1 .866±.004 14.2 .
PAGE 4
DL (AZD1) mm inch Roller plunger type +0.5 10 0 +.020 .394 0 Pretravel 2 max. .079 12 dia. 5 Nylon roller .472 Operating position 9±0.2 28±1 .354±.008 1.102±.039 4.3±0.1 .169±.004 R2 . .0 15 85 20±0.1 .787±.004 22±0.1 .866±.004 AZD1002 AZD1052 60 2.362 53 2.087 51±0.2 2.008±.008 30 1.181 47±0.2 1.850±.008 12.5 .492 21 .827 30 1.181 G1/2 (PG13.5) Adjustable roller arm (50 dia. rubber roller) General tolerance: ±0.4 ±.016 50 dia. × 6 1.969 dia. × 6 47.5±1 1.870±.039 42.4±1 1.669±.039 36.
PAGE 5
DL (AZD1) Adjustable rod (2.6 dia.) 6.7 .264 mm inch 38.1±1 1.500±.039 2.6 .102 dia. rod 20.3 .799 10+0.5 0 .394+.020 0 (26 to 114) (1.024 to 4.488) 20 .787 Hex. nut 9±0.2 .354±.008 18 .709 4.3±0.1 .169±.004 R2 . .0 15 85 60 47±0.2 2.362 1.850±.008 53 2.087 51±0.2 2.008±.008 AZD1007 AZD1057 20±0.1 .787±.004 22±0.1 .866±.004 30 1.181 12.5 .492 21 .827 30 1.181 44.4±1 1.748±.039 G1/2 (PG13.5) 2-4+0.2 0 dia. 2-.157+.008 dia. 0 5 holes depth General tolerance: ±0.4 ±.016 R1 47.5±1 1.870±.
PAGE 6
DL (AZD1) mm inch Conduit connector (PF type) 25 dia. 22 11 dia. .984 .866 19 .433 .748 AZD1830 11 dia. .433 Rubber seal inside diameter 9 dia. (.354) 11 dia. (.433) 3 .118 3 8 .118 .315 (14) (.551) Adaptable cable outer diameter Min. Max. 7.5 dia. (.295) 9.5 dia. (.374) 9 dia. (.354) 11 dia. (.433) G.1/2 General tolerance: ±0.5 ±.
PAGE 7
DL (AZD1) Open and close the cover Mounting For the adjustable roller arm type, the cover will not open and close since it contacts the adjustable arm. Either extend the arm fully or remove the arm, then open or close the cover. Also, the same is true of the variable rod types (AZD1007 and AZD1057). 1) When mounting, use washers (to prevent loosening) and tighten at a torque of 0.49 to 0.69 N•m {5 to 7 kg•cm}.
PAGE 8
DL (AZD1) mm inch DESIGN OF OPERATING DOG Roller arm type (H: Hysterisis) Roller arm type 15±3 .591±.118 H H 15±3 .591±.118 10 min. .394 Roller plunger type 10±1.5 .394±.059 5 min. .197 30° (H: Hysterisis) Roller plunger type 40±2 1.575±.079 H 10±1.5 .394±.059 10 min. .394 2.5 min. .098 30° 20 min. .787 H 12.5 0-2.5 .4920-.098 20 min. .787 55 2.165 40 0+1 1.575+.039 0 H 31 min. 1.220 28±1 25 min. 1.102±.039 .984 35 1.378 25 0+1 .984+.039 0 50 max. 1.