Datasheet

30
FOREIGN STANDARDS
Standards
SPECIFICATIONS
1. Rating
DATA
1. Life curve
Load
Rated control voltage
2.Characteristics
Resistive load (cos φ ]1) Inductive load (cos φ ]0.4)
Motor or lamp load
N.C. contact
125V AC 10A 6A 3A 1.5A
250V AC 10A 4A 1.5A 1A
115V DC 0.4A 0.05A – –
N.O. contact
UL
Applicable product
File No. : E-122222
Ratings : 10A 250V AC
Product type : Standard type only
CSA
File No. : LR55880
Ratings : 10A 250V AC
Product type : Standard type only
TÜV
Contact arrangement 1 Form C
Initial contact resistance, max. 15mΩ* (By voltage drop 6 to 8V DC at rated current)
Initial insulation resistance (At 500V DC)
Initial breakdown voltage
Shock resistance
In the free position
In the full operating position
Vibration resistance
Expected life
(Min. operation)
Mechanical
Electrical
Ambient temperature/Ambient humidity
Max. operating speed
Min. 100 MΩ
1,500 Vrms for 1 min Between non-consecutive terminals
2,000 Vrms for 1 min Between dead metal parts and each terminal
2,000 Vrms for 1 min Between ground and each terminal
Max. 98m/s
2
{10G}
Max. 294m/s
2
{30G}
55 Hz, double amplitude of 1.5 mm
10
7
(at 50 cpm)
2  10
5
(at 20 cpm)
–20 to +60°C –4 to +140°F/Max. 95% R.H. (at 20°C 68°F)
120 cpm
File No. : J9551204
Ratings : AC-15 2A/250V~
Product type : Standard type only
Order by standard part No.
Part No.
3.EN60947-5-1 performance
Item Rating
Rated insulation voltage (Ui) 250VAC
Rated impulse withstand voltage (Uimp) 2.5kV
Switching over voltage 2.5kV
Rated enclosed thermal current (Ithe) 10A
Conditional short-circuit current 100A
Short-circuit protection device 10A fuse
Protective construction IP64 (switch)
Pollution degree 3
4. Operating characteristics
Characteristics
Actuator
O.F. (N{gf})
max.
Short push plunger
R.F. (N{gf})
min.
Pretravel
(P.T.), max.
mm inch
Movement
Differential
(M.D.), max.
mm inch
Overtravel
(O.T.), min.
mm inch
5.88 {600} 0.98 {100} 2.0 .079 0.8 .031 0.8 .031
Operating Position
(O.P.) mm inch
30±0.8 1.181±.031
Push plunger 5.88 {600} 0.98 {100} 2.0 .079 0.8 .031 5.0 .197 44±1.2 1.732±.047
Hinge lever 1.47 {150} 0.39 {40} 13.5 .531 3.2 .126 4.0 .157 25±2.0 .984±.079
Roller lever 1.77 {180} 0.49 {50} 11.0 .433 2.4 .094 3.0 .118 40±1.9 1.575±.75
One-way roller lever 1.96 {200} 0.59 {60} 11.0 .433 2.4 .094 3.0 .118 50±2.0 1.969±.079
Hinge short lever 2.16 {200} 0.59 {60} 8.5 .335 2.0 .079 2.5 .098 25±1.3 .984±.051
Short roller lever 2.35 {240} 0.78 {80} 6.5 .256 1.5 .059 2.0 .079 40±1.6 1.575±.063
One-way short roller lever 2.75 {280} 0.98 {100} 6.5 .256 1.5 .059 2.0 .079 50±1.6 1.969±.063
Panel mount push plunger 5.88 {600} 0.98 {100} 2.0 .079 0.8 .031 6.0 .236 21.8±0.8 .858±.031
Panel mount roller plunger 5.88 {600} 0.98 {100} 2.0 .079 0.8 .031 6.0 .236 33.3±1.2 1.311±.047
Panel mount cross roller plunger 5.88 {600} 0.98 {100} 2.0 .079 0.8 .031 6.0 .236 33.3±1.2 1.311±.047
Flexible rod 1.18 {120} – 25 .984 – 11 .433 36 1.417 (T.T.)
5. Protective characteristics
Protective construction
Screw terminal type Epoxy-sealed terminal type
IEC
IP60

IP64 –

*The resistance of a copper wire is not included.
Note) For the operating characteristics, refer to the TECHNICAL INFORMATION.
10
A
C
5
V
10
Load current
(
A
)
5
10
5
c
o
s
1
1
7
6
10
8
10
2
Operations
(
10
4
)
φ
WIRING DIAGRAM
N.O.
ML
COM
N.C.
Circuit
COM N.O. N.C.
Terminal
ML (AZ7)
04/2005