RGB Card AW-PB302 Before attempting to connect or operate this product, please read these instructions completely.
For U.S.A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. SA 1965 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CONTENTS PREFACE ................................................................................................................................................................................ 2 SPECIAL NOTES ON OPERATION ......................................................................................................................................... 2 PRECAUTIONS .........................................................................................................................................
PREFACE • When the RGB card is installed in a convertible camera, for example, AW-E300, R/G/B or Y/Pr/Pb component signals can be output. SPECIAL NOTES ON OPERATION • Power Off Before Connecting or Disconnecting Cables Before plugging or unplugging the cables, be sure to switch power off. • Avoid Humidity and Dust. Avoid using the product at a humid, dusty place because much humidity and dust will cause damage to the parts inside. • Handle Carefully.
PRECAUTIONS • Ask a qualified service person for repairs when necessary. • Do not attempt to disassemble the camera, Remote Control Unit (RCU) or other units. In order to prevent electric shock, do not remove screws or covers. There are no user-serviceable parts inside. • Do not let water, metal, or other foreign objects inside. This is important to prevent fire and electric shock.
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS Video/RGB Output Connector [VIDEO/RGB] Composite signals, RGB/YPrPb/YC component signals, and synchronizing signals are output. These output signals can be selected using the menu. Use the special cable WV-CA9T5 (Dsub-BNC) or WVCA9T9 (Dsub-Dsub) to connect to it. VIDEO/RGB Pin No. Pin No.
MOUNTING (1) Switch the camera off, and disconnect the power connector and other cables from the camera. CAUTION • Be sure to ask your store, where you purchased the product, for mounting. • Disconnect the camera power connector before mounting. • Before handling the card, touch a metal part of the camera to discharge the static from the human body. An anti-static wrist strap is recommended for added safety. If you touch the card while you are still charged with static, it may cause trouble.
Pana s onic Rear panel Option card slot cover Card setscrews (6 mm) Pana s onic Rear panel setscrews (8 mm) RGB card -6-
Connecting RGB Monitor or Image Processor • To input signals to an RGB monitor or image processor, connect the VIDEO/RGB output connector to it with the cable WV-CA9T5 (Dsub-BNC: 5 m) or WV-CA9T9 (Dsub-Dsub: 5 m). • Use the AC adapter AW-PS505 for power supply. Use the power cable AW-CA4T1.
MENU ITEM SETTING ● MAIN MENU SCREEN A convertible camera, for example, AW-E300, can be set using the menu as suited to the system and shooting conditions. For details, refer to the operation manual for the camera. Main Menu of Halogen, Fluorescent, Outdoor Mode **Halogen Mode Set** Brightness Set Color Set G/L. Color Bar Set Sharpness Set Other Set Option Card Set Initialize Data ■ Setup Procedures (Output Signal Selection) (1) Display the main menu.
(2) The setting item (flashing) changes each time the menu switch, item switch, or NO switch is pressed. Select [Option Card Set] and press the YES switch to display the [Option Card Set] submenu. CAMERA OPTION CARD VIDEO OUT I/F REMOTE MENU Switchi “ j ITEM/AWC Switch i«j YES/ABC Switch i{j NO/BAR Switch i|j (3) Select [Component] with the menu switch and item switch, and select [R/G/B], [Y/Pr/Pb] or [Y/C] with the YES and NO switches.
APPEARANCE mm (inch) 21.
SPECIFICATIONS Video output: Switch: Source voltage: Power consumption: Operating temperature: Operating humidity: Dimensions: Weight: NTSC composite: 1 V[p-p] (75 Ω) R/G/B: 0.7 V[p-p] (75 Ω) Y/C: Y: 1 V[p-p], C: 0.286 V[p-p] Y/Pr/Pb: Y: 1 V[p-p], Pr/Pb: 0.7 V[p-p] SYNC: 2 V[p-p] (75 Ω, selected output from 9-pin Dsub connector or 50-pin Dsub camera connector) Component output switching (selected with menu) 12 V DC (supplied from camera) 2.4 W −10°C to +45°C (14°F to +113°F) 30 % to 90 % 21.
Broadcast & Television Systems Company Division of Matsushita Electric Corporation of America Executive Office: One Panasonic Way 3F-5, Secaucus, NJ 07094 Regional Offices: EASTERN ZONE: 50 Meadowlands Parkway, Secaucus, NJ 07094 (201) 348-7620 CENTRAL ZONE: 1707 North Randall Road, Elgin, IL 60123 (847) 468-5200 SOUTHERN ZONE: Atlanta Region: 1225 Northbrook Parkway, Suite 1-160, Suwanee, GA 30024 Panazip 11 (770) 338-6841, fax (770) 338-6741 Law Enforcement Video Products: 1225 Northbrook Parkway, Suite 1
