Panasonic Broadcast AW-HE100 Menu Information
Basic menu operations Menus are displayed on the monitor when the unit’s settings are to be selected. The monitor is connected to the video signal output connector (VIDEO OUT connector or HD/SD ANALOG connector). The basic menu operations involve displaying sub-menus from the main menu items, and selecting settings on the sub-menus. Some sub-menus have menu items for performing more detailed settings. The menu operations are conducted using the accessory wireless remote control.
Basic menu operations When performing the operations using the accessory wireless remote control 1 Press the [CAM1], [CAM2], [CAM3] or [CAM4] button to select the unit which is to be operated. 2 Press the [MENU] button for two seconds. The main menu is displayed. 3 Press the [] or [] button to make the item to be selected blink. Each time the [] or [] button is pressed, the blinking item changes. 4 Press the [] or [] button. The sub-menu of the selected item is displayed.
Basic menu operations When the camera is to be controlled from the AW-RP655 controller Jog dial (main) GAIN button When the LCD is in the gain adjustment mode (GAIN button: MANU) Select the desired gain setting from GAIN 0 dB to 18 dB. When the LCD is in the gain adjustment mode (GAIN button: AUTO) Select the desired gain setting from AGC MAX GAIN 6 dB, 12 dB or 18 dB. When the LCD is in the pedestal adjustment mode Adjust the PEDESTAL TOTAL setting (–30 to +30).
Basic menu operations 5 Press the [OK] button again. CAMERA MENU CTRL. The right display appears on the LCD panel: ITEM SEL. VALUE SEL. 6 Turn the jog dial (L) to make the item to be selected blink. Each time the jog dial (main) is pressed, the blinking item changes. 7 Press the jog dial (L). The sub-menu of the selected item is now displayed. (Some sub-menu items have a sub-menu of their own.) 8 Turn the jog dial (L) to make the item to be set or the setting blink.
Basic menu operations When the camera is to be controlled from the AW-RP555 controller Press the [MENU] button for two seconds. The camera menu becomes available for operation. [MENU]: Opens the menu and also scrolls up the item list. [ITEM]: Scrolls down the item list. [YES]: Confirms the item selection and also changes a set value in the positive direction. [NO]: Changes a set value in the negative direction.
Basic menu operations 5 Press the [MENU] or [ITEM] button to make the item to be set or the setting blink. Press the [MENU] button to scroll up the item list. Press the [ITEM] button to scroll down the item list. When “Return” is made to blink and the [YES] button is pressed, operation returns to the previous menu. 6 Press the [YES] or [NO] button to change the setting.
Basic menu operations When the camera is to be controlled from the AW-CB400/AW-RP400 controller The EXT command is allocated to the [OPTION SW] button to switch between Auto Focus and Manual Focus. Each time the [EXT] button is pressed, the focus mode switches between Auto Focus and Manual Focus.
Basic menu operations 4 Press the [C] button of [OPTION SW]. The sub-menu of the selected item is displayed. 5 Press the [A] or [B] button of [OPTION SW] to make the item to be set or the setting blink. Press the [A] button of the [OPTION SW] to scroll up the item list. Press the [B] button of the [OPTION SW] to scroll down the item list. When “Return” is made to blink and the [C] button is pressed, operation returns to the previous menu.
Setting the menu items Setting the menu items 3 Tally lamp use selection [Tally: On, Off] (Factory setting: On = controlled) Using this item, set the function for having the tally lamp lighted or extinguished by the tally control signal to ON or OFF. When the unit’s settings are to be selected, the menus are displayed on the monitor. The monitor is connected to the video signal output connector (VIDEO OUT connector or HD/SD ANALOG connector).
Setting the menu items The operation for turning on the unit’s power can be performed from any control device regardless of what has been selected as this item’s setting. Concerning initialization When “Initialize” is selected, the initialization confirmation screen is displayed for about 10 seconds. (Press the [] or [] button to make “Initialize” blink, and press the [] or [] button.
Setting the menu items Daylight mode setting menu Camera Setting menu The shooting mode is selected on this menu.
Setting the menu items Return to the previous menu (main menu) [Return] Concerning initialization When “Initialize” is selected, the initialization confirmation screen is displayed for about 10 seconds. (Press the [] or [] button to make “Initialize” blink, and press the [] or [] button.) (User mode only) Sharpness setting menu display [Sharpness(DTL) Set] Initialize (Halogen Mode) The sharpness setting menu in the user mode is displayed here.
Setting the menu items Brightness setting menu User mode brightness setting menu Brightness setting menu for halogen light mode, fluorescent light mode and daylight mode Brightness Set 1-------- Picture Level 6-------- Shutter Mode 7-------- Step/Synchro 3-------- Gain 4---------- AGC Max Gain Brightness Set 1-------- Picture Level 2-------- Step 3-------- Gain 4-------- AGC Max Gain +1 1/100 Auto 18dB +1 Synchro 60.
Setting the menu items Color setting menu User mode color setting menu Color setting menu for halogen light mode, fluorescent light mode and daylight mode Color Set Color Set 1-------- Chroma Level 2-------- White Bal 1-------- Chroma Level 2-------- White Bal 4-------- Pedestal Painting 5---------- R Gain 6---------- B Gain +1 ATW +1 ATW ±0 ±0 ±0 3------ Return ------ Return (User mode only) 1 Color density adjustment [Chroma Level: –3 to +3] 4 Black level adjustment [Pedestal
Setting the menu items Genlock/color bar setting menu Sharpness setting menu (user mode only) The same settings established on the genlock/color bar setting menu are common to all the shooting modes (halogen light mode, fluorescent light mode, daylight mode and user mode). (When a setting in one mode is changed, the same setting is established in the other modes.) The sharpness setting menu is provided in the user mode only.
Setting the menu items Other settings (Other Set) menu 4 Video aspect ratio selection [Aspect: ---, 16:9, 4:3] Apart from the gamma correction level selection (Gamma) setting, the settings of the Other Set menu are common to all the shooting modes (halogen light mode, fluorescent light mode, daylight mode and user mode). (When a setting in one mode is changed, the same setting is established in the other modes.
Setting the menu items Other setting (Other Set) menu for the user mode (Other Set) At the 3 video format selection (Format) item, the video format is not switched immediately even when the setting is changed. The screen shown below on which to confirm the setting changes appears when an operation involving a transfer to another item has been performed (when the [] or [] button is pressed).
Menu item table Menu Pan Tilt Head Setting Item Tally Landing Install Position Smart Picture Flip Flip Detect Angle Controller Initialize Return Camera Brightness Picture Level Setting Set Step Gain AGC Max Gain Return Color Set Chroma Level White Bal Return G/L, Setup H Phase Set SC Coarse SC Fine Setup Level Return Other Set Focus Iris Format Aspect Status Component Focus ADJ With Zoom Return Initialize Return Camera Brightness Picture Level Setting Set Step Gain AGC Max Gain Ret