Multi Control Hub Model AW- POWER OFF ON Multi C ontrol H ub AW– Before attempting to connect, operate or adjust this product, please read these instructions completely.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Table of Contents For Your Safety Overview . . . . . . . . . . . . . . . . . . . . . . . . . 4 System Connections . . . . . . . . . . . . . . 11 Accessories . . . . . . . . . . . . . . . . . . . . . . 4 Operations. . . . . . . . . . . . . . . . . . . . . . . 17 For Your Safety. . . . . . . . . . . . . . . . . . . . 5 Rack Mounting Example . . . . . . . . . . . 18 Controls and Their Functions . . . . . . . . 6 $ Rack Mounting Procedure . . . . . . . 18 $ Front Panel. . . . . . . . . . . . . . . . .
Controls and Their Functions Controls and Their Functions $ Front Panel $ Rear Panel 8 1 9 5 4 PREVIEW OUT TO CONTROL PANEL PREVIEW OUT PAN/TILT CONTROL IN PREVIEW OUT PAN/TILT CONTROL IN PREVIEW OUT PAN/TILT CONTROL IN TO PAN/TILT HEAD HUB PREVIEW OUT PAN/TILT CONTROL IN PREVIEW IN PAN/TILT CONTROL OUT PAN/TILT CONTROL IN BLACK BURST OUT POWER OFF CAM CONT IN ON CAM CONT IN CAM CONT IN BLACK BURST OUT BLACK BURST OUT CAM CONT IN BLACK BURST OUT CAM CONT IN BLACK BURST OUT -
Controls and Their Functions Controls and Their Functions 8 Pan/Tilt Head Control Signal Input Connector [TO CONTROL PANEL PAN/TILT CONTROL IN] (RJ-45 8-pin Modular Jack) Connect this connector to the control panel pan/tilt control signal output connector [PAN/TILT CONTROL OUT] of the control panel using a 10BASE-T (UTP category 5) straight cable.
Controls and Their Functions System Connections (Indoor Pan/tilt Head System) $ Priority Switchbox O Turn off the power to all pieces of equipment before making any connections. O For the control panel, use the AC adapter model AW-PS301 (sold separately), for the multi port hub and multi control hub, the AC adapter model AW-PS505 (sold separately), and for the pan/tilt head AC adapter model, the AWPS300 (sold separately).
System Connections (Indoor Pan/tilt Head System) System Connections (Indoor Pan/tilt Head System) $ System Incorporating AW-RP301 Since the pan/tilt control panel is not equipped with a video signal compensation circuit, it may be necessary to use a separate cable compensation device in some cases.
System Connections (Indoor Pan/tilt Head System) System Connections (Indoor Pan/tilt Head System) $ System Incorporating AW-RP501 $ System Incorporating AW-RP505 or AW-HB505 Convertible camera OPT CN CARD VIDEO OUT LF REMCTE Maximum Cable Length The maximum cable length from the camera and pan/tilt head to the hybrid control panel is 500 meters.
System Connections (Indoor Pan/tilt Head System) Operations $ Example System Setup 1. Turn the power on. Color monitor (75 Ω terminator) Zoom/focus control Adjustment such as cable compensation, genlock adjustment, and total pedestal adjustment should be applied to the video signals output from the AW-HB505.
Rack Mounting Example Specifications Power switch $ Rack Mounting Procedure Power supply: DC +12 V (4-pin Cannon Connector) Power consumption: DC 12 V, 0.47 A Multi Control Hub To mount the multi control hub on a rack, use the supplied rack mounting brackets and mounting screws (M4a10). 1 Press the power switch to turn power off. 2 Remove the four feet from the bottom of the multi control hub.
PANASONIC BROADCAST & DIGITAL SYSTEMS COMPANY DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: 3330 Cahuenga Blvd W.
