AV-HS04M2 Before operating this product, please read the instructions carefully and save this manual for future use. 01.AV-HS04M2_English.indd 1 日本語 РУССКИЙ ESPAÑOL ITALIANO FRANÇAIS Model No.
ENGLISH VERSION Safety precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.
For CANADA This class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. FCC Note: This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Safety precautions IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 10) Protect the power cord form being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings.
Safety precautions This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local retailer upon the purchase of an equivalent new product.
Contents Safety precautions ......................... Introduction ..................................... Accessory ....................................... Precautions for use ........................ Name of each part .......................... 1 5 5 6 7 Mounting ......................................... 8 Connections .................................. 11 Appearance ................................... 12 Specifications ...............................
Precautions for use Handle carefully. Use the product in an ambient temperature of 32 °F to 104 °F (0 °C to 40 °C). Avoid using the product at a cold place below 32 °F (0 °C) or at a hot place above 104 °F (40 °C) because extremely low or high temperature will adversely affect the parts inside. ENGLISH Do not drop the product, or subject it to strong shock or vibration. Power off before connecting or disconnecting cables. Before plugging or unplugging the cables, be sure to switch power off.
Name of each part Y ANALOG INPUTS Y Pr Pb Pb Pr Analog input connectors [ANALOG INPUTS] When connected to the SLOT1 option input connector: INPUT5 When connected to the SLOT2 option input connector: INPUT7 Analog input connectors [ANALOG INPUTS] When connected to the SLOT1 option input connector: INPUT6 When connected to the SLOT2 option input connector: INPUT8 Setting switches 1 2 3 4 5 6 7 8 O N Switch no.
Mounting Be sure to ask the store or dealer where you purchased the product for assistance with mounting and removal. Set to OFF and unplug the power connector before mounting and removal. Before handling this board, touch a metal part of the AV-HS400N/E to discharge the static electricity from the human body. An anti-static wrist strap is recommended for safety. Failures may be caused if you touch this board while you are still charged with static electricity.
Mounting Align the board with the guide rails, and insert it slowly. Insert it all the way in. Take care not to use force to insert the board because the connectors may be damaged in the process. Attach the board using the two screws. Screw Screw After connecting the necessary cables, plug in the power cord, and turn on the power. 9 (E) 01.AV-HS04M2_English.
Mounting Turn on the power of the AV-HS400N/E, and use the menu used to display the statuses of the option boards to check that the board has been mounted correctly. Press the [FUNC] button to light its indicator, and press the [SYSTEM] button to display the SYSTEM menu. ENGLISH Checking that the board has been mounted correctly Turn [F1] to display the OptVer sub menu.
Connections Connections when not implementing gen-lock (frame synchronizer ON) HD SDI HD SDI monitor HD SDI HD SDI monitor Multi-format live switcher AV-HS400N/E POWER UTIL OUTPUTS INPUTS SLOT2 UTIL6 UTIL5 SLOT1 UTIL4 UTIL3 8 6 7 5 SLOT2 SLOT1 ON DVI INPUTS PC OUTPUTS OFF SLOT 2 SLOT 2 Y Pb Y Pb DVI-I DVI-I Pr DVI-I 㨪IN ANALOG OUTPUTS Y ANALOG INPUTS Y Pr Pb Pb Pr SLOT 1 SLOT 1 Y Pr Pb Pr SDI OUTPUTS SDI INPUTS PGM UTIL2 UTIL1 2 1 3 4 OUT IN OUT 2 IN OUT SIGNAL
Appearance ENGLISH ANALOG INPUTS Y Pr Y Pb 5-2/16 (130) Pb Pr Unit: Inch (mm) 1-1/16 (27) 6 (152.5) 12 (E) 01.AV-HS04M2_English.
Specifications Signal formats SD: 480/59.94i, 576/50i HD: 1080/59.94i, 1080/50i, 720/59.94p, 720/50p Analog input SD/HD analog component Y/Pb/Pr (1.0 Vp-p, 75 ) BNC ×2 Ambient operating 32 °F to 104 °F (0 °C to 40 °C) temperature Humidity 10 % to 90 % (no condensation) Power supply DC 12 V (supplied from the AV-HS400N/E) Power consumption ?? W Dimensions (W H D) 6˝ × 1-1/16˝ × 5-2/16˝ (152.5 × 27 × 130 mm) Weight 0.4 lbs. (0.2 kg) 13 (E) 01.AV-HS04M2_English.
ENGLISH Memo 14 (E) 01.AV-HS04M2_English.
