Datasheet

ASQ1
16
APPLICABLE CURRENT RANGE (reference)
PRODUCT TYPES
1. Terminal type (Mounting hole: 3mm standard type/3mm without boss type/2 boss type/Side pin type)
2. Wire leads bottom type (Mounting hole: 3mm standard type)
3. Wire leads side type (Mounting hole: 3mm standard type)
RATING
1. Rating
1 mA, 5 V DC to 100 mA, 30 V DC
Note: Please consult us regarding 42 V DC rating.
2. Operation environment and conditions
Note: When switching at low and high speeds or under vibration, or in high-temperature, high-humidity environments, life and performance may be
reduced significantly depending on the load capacity. Please consult us.
3. Electrical characteristics
Actuator
Operating
force Max.
Mounting hole: 3mm standard type
Mounting
hole: 3mm
without
boss type
Right
2 boss type
Left 2 boss
type
Right side
pin type
Left side pin
type
Solder
terminal
PC
right angle
terminal
PC
left angle
terminal
PC board
terminal
Solder
terminal
Solder
terminal
Solder
terminal
Solder
terminal
Pin plunger 1.5N ASQ10410 ASQ10710 ASQ10810 ASQ11510 ASQ16410 ASQ17410 ASQ14410 ASQ15410
Leaf lever 1.7N ASQ10417 ASQ10717 ASQ10817 ASQ11517 ASQ16417 ASQ17417 ASQ14417 ASQ15417
Simulated leaf lever 1.5N ASQ10418 ASQ10718 ASQ10818 ASQ11518 ASQ16418 ASQ17418 ASQ14418 ASQ15418
Actuator Operating force Max.
Wire leads bottom type (Mounting hole: 3mm standard type)
Switching type NC type NO type
Pin plunger 1.5N ASQ10610 ASQ10620 ASQ10630
Leaf lever 1.7N ASQ10617 ASQ10627 ASQ10637
Simulated leaf lever 1.5N ASQ10618 ASQ10628 ASQ10638
Actuator Operating force Max.
Wire leads right side type
(Mounting hole: 3mm standard type)
Wire leads left side type
(Mounting hole: 3mm standard type)
NC type NO type NC type NO type
Pin plunger 1.5N ASQ10220 ASQ10230 ASQ10320 ASQ10330
Leaf lever 1.7N ASQ10227 ASQ10237 ASQ10327 ASQ10337
Simulated leaf lever 1.5N ASQ10228 ASQ10238 ASQ10328 ASQ10338
Item Specifications
Ambient and storage temperature –40°C to +85°C (no freezing and condensing)
Allowable operating speed 30 to 500 mm/sec.
Max. operating cycle rate 120 cpm
Withstand voltage (Initial)
Between non-continuous terminals: 600 Vrms, Between each terminal and other exposed metal parts: 1,500 Vrms,
Between each terminal and ground: 1,500 Vrms (at detection current of 1 mA)
Insulation resistance (Initial) Min. 100 MΩ (at 100 V DC insulation resistance meter) (Locations measured same as withstand voltage.)
Contact resistance (Initial) Max. 1 Ω (at contact resistance meter)
Applicable range
100mA
1mA
0
30V5VDC
SnapActionSwitch_neu.book Seite 16 Montag, 20. Oktober 2008 4:03 16
06/2009