Datasheet

RS
4
ds_61314_0000_en_rs: 210408J
2. Specifications
* Measured the operation noise of the relay alone (with diodes at both ends of the coil) 30cm away from top side, by the A-weighted, FAST method while applying the rated
voltage.
(Reference) Operation noise of RK relay (existing model): Approx. 50dB
Item Specifications
Contact
Arrangement 1 Form C
Contact material Gold plating
Contact resistance (Initial) Max. 100 mΩ (By voltage drop 10 V AC 10mA)
Rating
Nominal switching capacity 1W (at 3 GHz, Impedance: 50/75Ω, V.S.W.R.: Max. 1.4), 10 mA 24 V DC (resistive load)
Contact carrying power Max. 10W (at 3GHz, Impedance: 50/75Ω, V.S.W.R.: Max. 1.4)
Max. switching voltage 30 V DC
Max. switching current 0.5 A DC
Nominal
operating
power
Single side stable type 200mW
1 coil latching type 200mW
2 coil latching type 400mW
High frequency
characteristics,
Impedance: 50Ω
(Initial)
V.S.W.R.
Max. 1.20/900MHz, Max. 1.40/3GHz (Standard PC board terminal)
Max. 1.20/900MHz, Max. 1.40/3GHz (Surface-mount terminal)
Insertion loss (without D.U.T. board’s loss)
Max. 0.10dB/900MHz, Max. 0.35dB/3GHz (Standard PC board terminal)
Max. 0.20dB/900MHz, Max. 0.40dB/3GHz (Surface-mount terminal)
Isolation
Min. 60dB/900MHz, Min. 35dB/3GHz (Standard PC board terminal)
Min. 55dB/900MHz, Min. 30dB/3GHz (Surface-mount terminal)
High frequency
characteristics,
Impedance: 75Ω
(Initial)
V.S.W.R.
Max. 1.15/900MHz, Max. 1.40/3GHz (Standard PC board terminal)
Max. 1.20/900MHz, Max. 1.50/3GHz (Surface-mount terminal)
Insertion loss (without D.U.T. board’s loss)
Max. 0.10dB/900MHz, Max. 0.30dB/3GHz (Standard PC board terminal)
Max. 0.20dB/900MHz, Max. 0.50dB/3GHz (Surface-mount terminal)
Isolation
Min. 60dB/900MHz, Min. 30dB/3GHz (Standard PC board terminal)
Min. 55dB/900MHz, Min. 30dB/3GHz (Surface-mount terminal)
Electrical
characteristics
Insulation resistance (Initial) Min. 100MΩ (at 500V DC, Measurement at same location as “Breakdown voltage” section.)
Breakdown
voltage
(Initial)
Between open contacts 500 Vrms for 1min. (Detection current: 10mA)
Between contact and earth terminal 500 Vrms for 1min. (Detection current: 10mA)
Between contact and coil 1,000 Vrms for 1min. (Detection current: 10mA)
Temperature rise (at 20°C 68°F)
Max. 60°C 140°F
(By resistive method, nominal voltage applied to the coil, contact carrying current: 10mA)
Operate time (at 20°C 68°F) Max. 10 ms (Nominal voltage applied to the coil, excluding contact bounce time)
Release time (at 20°C 68°F)
Max. 6 ms (Nominal voltage applied to the coil, excluding contact bounce time)
(without diode)
Set time and Reset time (at 20°
C 68°F) Max. 10 ms (Nominal voltage applied to the coil, excluding contact bounce time)
Mechanical
characteristics
Shock
resistance
Functional Min. 196 m/s
2
(Half-wave pulse of sine wave: 11 ms, detection time: 10μs)
Destructive Min. 980 m/s
2
(Half-wave pulse of sine wave: 6 ms)
Vibration
resistance
Functional 10 to 55 Hz at double amplitude of 3 mm (Detection time: 10μs)
Destructive 10 to 55 Hz at double amplitude of 5 mm
Operation noise*
Standard type Approx. 40dB
Silent type (75Ω, PC board terminal type only) Approx. 30dB
Expected life
Mechanical
life
Single side stable standard type Min. 5×10
6
(at 180 cpm)
Single side stable silent type Min. 10
6
(at 180 cpm)
Latching type Min. 10
6
(at 180 cpm)
Electrical life
50Ω type
Min. 10
6
(Standard PC board terminal), Min. 3×10
5
(Surface-mount terminal)
(10V DC 10mA resistive load)/Min. 3×10
5
(24V DC 10mA resistive load)
Min. 10
6
(Standard PC board terminal), Min. 3×10
5
(Surface-mount terminal)
(1W, at 3GHz, Impedance: 50Ω, V.S.W.R: Max. 1.4) (at 20 cpm)
75Ω type
Min. 3×10
5
(10mA 24V DC resistive load)
Min. 3×10
5
(1W, at 3GHz, Impedance: 75Ω, V.S.W.R: Max. 1.4) (at 20 cpm)
Conditions Conditions for operation, transport and storage
Ambient temperature: –40 to 70°C –40°F to 158°F
(Single side stable standard and Latching type)
Ambient temperature: –40 to 60°C –40°F to 140°F (Single side stable silent type)
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Unit weight Approx. 2 g .071 oz