Datasheet

ManualsBrandsPANASONIC ManualsRelaysPCB relays 12 Vdc 0.5 A 1 change-over 1 pc(s)

ds_61314_0000_en_rs: 210408J

ORDERING INFORMATION

3 GHz MICROWAVE RELAYS

Miniature size

Lineup includes

50/75Ω type

RS RELAYS (ARS)

FEATURES

1. Super miniature design

14 × 8.6 × 7.2 mm .551 × .339 × .283 inch

(standard PC board terminal)

2. Lineup includes silent type.

(75Ω type only)

Operation noise (Unit: dB)

60% OFF in volume

(Compared to

RK relay)

RKRERS

(Silent type)

3. Excellent high frequency

characteristics

• Impedance: 50Ω

(Standard PC board terminal)

• Impedance: 75Ω

(Standard PC board terminal)

• Impedance: 50Ω

(Surface-mount terminal)

• Impedance: 75Ω

(Surface-mount terminal)

4. Lineup includes surface-mount

terminal type

E and Y layouts available.

5. Lineup includes reversed contact

type

Great design freedom is possible using

reversed contact type in which the

positions of the N.O. and N.C. contacts

are switched.

TYPICAL APPLICATIONS

1. Broadcasting and video equipment

markets

• Digital broadcasting equipment

• STB/tuner, etc.

2. Mobile phone base stations

3. Communications market

• Antenna switching

• All types of wireless devices

4. Measurement equipment market

• Spectrum analyzer and oscilloscope,

etc.

Frequency to 900 MHz to 3 GHz

V. S. W. R. (Max.) 1.20 1.40

Insertion loss

(dB, Max.)

0.10 0.35

Isolation (dB, Min.) 60 35

Frequency to 900 MHz to 3 GHz

V. S. W. R. (Max.) 1.15 1.40

Insertion loss

(dB, Max.)

0.10 0.30

Isolation (dB, Min.) 60 30

Frequency to 900 MHz to 3 GHz

V. S. W. R. (Max.) 1.20 1.40

Insertion loss

(dB, Max.)

0.20 0.40

Isolation (dB, Min.) 55 30

Frequency to 900 MHz to 3 GHz

V. S. W. R. (Max.) 1.20 1.50

Insertion loss

(dB, Max.)

0.20 0.50

Isolation (dB, Min.) 55 30

RS relays

Contact arrangement

1: Standard contact type (1 Form C)

3: Reversed contact type (1 Form C)

Nil:

ARS

Operating function

0: Single side stable standard type (Impedance: 75Ω)

1: 1 coil latching type (Impedance: 75Ω)

2: 2 coil latching type (Impedance: 75Ω)

3: Single side stable silent type (Impedance: 75Ω)

4: Single side stable type (Impedance: 50Ω)

5: 1 coil latching type (Impedance: 50Ω)

6: 2 coil latching type (Impedance: 50Ω)

Coil voltage, DC

03: 3 V 4H: 4.5 V 09: 9 V 12: 12 V 24: 24 V

Packing style

Nil:

Carton packing (Standard PC board terminal only)

Tube packing (Surface-mount terminal only)

Tape and reel packing (picked from 2-pin side) (Surface-mount terminal only)

Tape and reel packing (picked from 18-pin side) (Surface-mount terminal only)

Standard PC board terminal

Surface-mount terminal, E layout

Surface-mount terminal, Y layout

Summary of content (11 pages)

PAGE 1
RS 3 GHz MICROWAVE RELAYS Miniature size Lineup includes 50/75Ω type 3. Excellent high frequency characteristics • Impedance: 50Ω (Standard PC board terminal) to 900 MHz to 3 GHz V. S. W. R. (Max.) Frequency 1.20 1.40 Insertion loss (dB, Max.) 0.10 0.35 60 35 Isolation (dB, Min.) FEATURES 1. Super miniature design 14 × 8.6 × 7.2 mm .551 × .339 × .283 inch (standard PC board terminal) 60% OFF in volume (Compared to RK relay) 2. Lineup includes silent type.
PAGE 2
RS TYPES 1. Standard PC board terminal and standard contact type Impedance Nominal coil voltage 50Ω 3 V DC 4.5 V DC 9 V DC 12 V DC 24 V DC Impedance Nominal coil voltage 75Ω 3 V DC 4.5 V DC 9 V DC 12 V DC 24 V DC Part No. 1 coil latching type ARS1503 ARS154H ARS1509 ARS1512 ARS1524 Single side stable type ARS1403 ARS144H ARS1409 ARS1412 ARS1424 2 coil latching type ARS1603 ARS164H ARS1609 ARS1612 ARS1624 Part No.
PAGE 3
RS 5. Surface-mount terminal and reversed contact type, E layout Impedance Nominal coil voltage 3 V DC 4.5 V DC 9 V DC 12 V DC 24 V DC 3 V DC 4.5 V DC 9 V DC 12 V DC 24 V DC 50Ω 75Ω Part No.
PAGE 4
RS 2. Specifications Item Contact Rating 1 Form C Contact material Gold plating Contact resistance (Initial) Max. 100 mΩ (By voltage drop 10 V AC 10mA) Nominal switching capacity 1W (at 3 GHz, Impedance: 50/75Ω, V.S.W.R.: Max. 1.4), 10 mA 24 V DC (resistive load) Contact carrying power Max. 10W (at 3GHz, Impedance: 50/75Ω, V.S.W.R.: Max. 1.4) Max. switching voltage 30 V DC Max. switching current 0.
PAGE 5
RS REFERENCE DATA 1.-(1) High frequency characteristics (Impedance: 50Ω, Standard PC board terminal) Sample: ARS144H; Measuring method: Measured with Agilent Technologies network analyzer (E8363B). *For details see No. 7 under “NOTES”. • V.S.W.R. characteristics • Insertion loss characteristics (without D.U.T. board’s loss) 2 • Isolation characteristics 0 0 NO Standard value 1.5 NC Isolation, dB Insertion loss, dB V.S.W. R. Reference value Standard value 0.
PAGE 6
RS 2.-(1) Operation noise distribution When operated Quantity, n Quantity, n Microphone Top of relay When released 30 30 Sample: ARS134H (single side stable silent type), 50 pcs. Coil voltage: rated voltage applied (with diode) Equipment setting: A weighted sound pressure level, FAST. Background noise: approx. 20 dB Method of measurement: See figure below. 20 10 10 300 mm 11.811inch 20 Acoustic absorption mat 0 20 30 40 Relay 2.
PAGE 7
RS External dimensions PC board pattern (Bottom view) 14.00 .551 8.60 .339 3.50 .138 7.00 .276 JAPAN 2.54 .100 6.35 .250 2 coil latching only 6.35 .250 3-2.50 +0.5 −0.1 3-.098 +.020 −.004 (Contact terminal) Lot No. The part numbers depend on the type and voltage. 2.54 .100 3-0.90 dia. 3-.035 dia. 3-0.70 dia. Min. 3-.028 dia. Min. R0.40 1.80 R.016 .071 0.80 .031 2. 75Ω type Tolerance: ±0.1 ±.004 1.40 .055 2 coil latching only 3-0.40×0.20 3-.016×.008 Stand off 3- 0.45 3- .018 2-1.
PAGE 8
RS 2) Y layout External dimensions 10.16 .400 3.2 .126 0.6 .024 8-0.4 8-.016 The part numbers depend on the type and voltage. 0.5 0.6 .020 .024 3.2 .126 Schematic (Top view) Single side stable type (Deenergized condition) 3.2 .126 3.2 .126 0.6 .024 NC 18 17 16 15 2 - 0.5 .020 0.5 .020 1.27 .050 10.16 .400 14.0 .551 0.15 .006 8.6 .339 0.15 .006 Single side stable type (Deenergized condition) NO 18 17 16 15 2 - External dimensions 10.16 .400 3.2 .126 0.6 .024 8-0.4 8-.
PAGE 9
RS NOTES 1. Coil operating power Pure DC current should be applied to the coil. The wave form should be rectangular. If it includes ripple, the ripple factor should be less than 5%. However, check it with the actual circuit since the characteristics may be slightly different. The nominal operating voltage should be applied to the coil for more than 30 ms to set/reset the latching type relay. 2. Coil connection When connecting coils, refer to the wiring diagram to prevent mis-operation or malfunction. 3.
PAGE 10
RS 8. Measuring method 1) 50Ω type 1 Network analyzer PC board Dimensions (mm inch) 2 PORT2 A g ilen t 1 2.50 .098 1.80 .071 2 Te ch n o l o g i e s E 8 3 63 B PORT1 20.00 .787 10.16 .400 R0.40 R.016 6.05 .238 No. Product name Contents 1 Agilent 85130-60011 Adapter 2.4mm-3.5mm female .095inch-.138inch female 2 SUHNER SUCOFLEX104 Cable 3.5mm-3.5mm male .138inch-.138inch male After calibration, connect the D.U.T. board and measure.
PAGE 11
RS Insertion loss compensation The insertion loss of relay itself is given by subtracting the insertion loss of shortcircuit the COM and the NC (or NO). (signal path and two connectors) 9. Others 1) The switching lifetime is defined under the standard test condition specified in the JIS* C 5442 standard (temperature 15 to 35°C 59 to 95°F, humidity 25 to 75%).