Datasheet

ManualsBrandsPANASONIC ManualsRelays12 Vdc 1 change-over 1 pc(s)

–1–

ASCTB103E 201411-T

HIGH FREQUENCY CHARACTERISTICS (Impedance 50Ω)

Notes: *1 The 6GHz type only has the above characteristics up to 6GHz.

*2 18 to 26.5GHz characteristics can be applied 26.5GHz type only (SPDT, Transfer)

ORDERING INFORMATION

26.5 GHz max. Coaxial

switches coming in SPDT,

Transfer, and SP6T types

RD COAXIAL

SWITCHES (ARD)

Frequency to 1 GHz 1 to 4 GHz 4 to 8 GHz*

8 to 12.4 GHz 12.4 to 18 GHz 18 to 26.5 GHz*

V.S.W.R. (max.) 1.1 1.15 1.25 1.35 1.5 1.7

V.S.W.R. (SP6T With termination) (max.) 1.20 1.40 1.50 — —

Insertion loss (dB. max.) 0.2 0.3 0.4 0.5 0.8

Isolation (dB. min.) 85 80 70 65 60 55

6GHz type

RoHS compliant

FEATURES

1. Excellent high frequency

characteristics (50Ω, to 26.5Ghz)

2. SPDT, Transfer and SP6T types are

available.

3. High sensitivity

Nominal operating power:

840 mW (SPDT/SP6T, Fail-safe type,

with indicator)

1,540 mW (Transfer, Fail-safe type,

with indicator)

*Without 24V type

4. Long-lasting life: min. 5 × 10

5. With termination type is added.

(SP6T)

Thanks to the addition of termination,

steady high frequency characteristics

can be maintained when contacts are

either open or closed and this

contributes to increase system

reliability.

TYPICAL APPLICATIONS

Wireless and mobile communication

• Cellular phone base station

• Ampliﬁer switching

Digital broadcasting

• Broadcasting relay station

• Broadcasting equipment

High frequency measuring market

All types of inspection equipment

If you consider using applications with

low level loads or with high frequency

switching, please consult us.

Frequency

1: to 18GHz (SPDT)

2: to 18GHz (Transfer)

3: to 13GHz (SP6T)

5: to 26.5GHz (SPDT)

6: to 26.5GHz (Transfer)

7: to 6GHz (SPDT)

RD coaxial switches

ARD

Operating function

00: Fail-safe (with indicator)

20: Latching (with indicator)

51: Latching with TTL driver (SPDT, Transfer)

(with self cut-off function) (with indicator)

02: Fail-safe (without indicator)

22: Latching (without indicator)

53: Latching with TTL driver (SPDT)

(with self cut-off function) (without indicator)

Nominal operating voltage, V DC

4H:

05:

12: 12

24: 24

4.5 (Fail-safe, Latching type only)

5 (Latching with TTL driver type only)

Operation terminal

Nil:

Solder terminal

Connector cable (SPDT type only)

Termination (SP6T type only)

Nil:

No termination

With termination

HF data attached

Nil:

No HF test data attached

HF test data attached

Note: Sealed types also available, please consult us (SPDT only)

Summary of content (14 pages)

PAGE 1
26.5 GHz max. Coaxial switches coming in SPDT, Transfer, and SP6T types 6GHz type FEATURES TYPICAL APPLICATIONS 1. Excellent high frequency characteristics (50Ω, to 26.5Ghz) 2. SPDT, Transfer and SP6T types are available. 3.
PAGE 2
RD (ARD) TYPES 1. SPDT 1) Solder terminal Operating function Fail-safe (with indicator) Latching (with indicator) Latching with TTL driver (with self cut-off function) (with indicator) Fail-safe (without indicator) Latching (without indicator) Latching with TTL driver (with self cut-off function) (without indicator) Nominal operating voltage 6GHz type No HF datasheet attached 18GHz type No HF datasheet HF datasheet attached attached 26.5GHz type No HF datasheet HF datasheet attached attached 4.
PAGE 3
RD (ARD) 4. SP6T (with termination) Operating function Nominal operating voltage 4.5 V DC 12 V DC 24 V DC 4.5 V DC 12 V DC 24 V DC Fail-safe Latching 13GHz type No HF datasheet attached ARD3004HZ ARD30012Z ARD30024Z ARD3204HZ ARD32012Z ARD32024Z HF datasheet attached ARD3004HZQ ARD30012ZQ ARD30024ZQ ARD3204HZQ ARD32012ZQ ARD32024ZQ Note: Standard packing; Carton: 1 pc. Case: 5 pcs. RATING 1. Coil data (1) SPDT 1) Fail-safe type Nominal operating voltage 4.
PAGE 4
RD (ARD) Voltage VDC • Operating voltage range 1) Fail-safe type 2) Latching type 3) Latching with TTL driver type (with self cut-off function) 4.5 12 24 V V V 6 16 32 4.5 12 24 V V V 6 16 32 5 12 24 V V V 6.67 16 32 5.25 14 28 5.25 14 28 5.83 14 28 4.5 12 24 4.5 12 24 5 12 24 3.75 10 20 3.75 10 20 Nominal voltage 2.25 6 12 1.5 4 8 0.
PAGE 5
RD (ARD) 2. Specifications 1) SPDT/Transfer Characteristics Contact Item Arrangement Contact material Initial contact resistance Contact input power Rating Nominal operating power Indicator rating (with indicator type only) Fail-safe Latching Contact rating Initial contact resistance Min. switching capacity (Reference value) Specifications SPDT Transfer Gold plating Max. 100mΩ (By voltage drop 6V DC 1A) 120W (at 3GHz) (V.S.W.R. 1.
PAGE 6
RD (ARD) 2) SP6T Characteristics Contact Rating Indicator rating High frequency characteristics (Impedance 50Ω) Item Arrangement Contact material Initial contact resistance Contact input power No termination With termination Nominal operating power Fail-safe 840mW (4.5V, 12V DC), 930mW (24V DC) Time characteristics (at 20°C 68°F) Mechanical characteristics 120 W (at 3GHz) (V.S.W.R. 1.15 or less, no contact switching, ambient temperature 25°C 77°F)*1 2W (at 3GHz) (V.S.W.R. 1.
PAGE 7
RD (ARD) REFERENCE DATA 1-(1). High frequency characteristics (SPDT) 6GHz type Sample: ARD70012 Measuring method: Measured with Agilent Technologies network analyzer (E8363B). • Insertion loss • Isolation 1.9 0 0 1.8 0.1 10 1.7 0.2 1.5 1.4 Standard value 20 0.3 Reference value Standard value 0.4 0.5 Isolation, dB 1.6 Insertion loss, dB V.S.W.R. • V.S.W.R. 30 40 50 0.6 60 0.7 70 1.1 0.8 80 1.0 0.9 1.3 Reference value 1.
PAGE 8
RD (ARD) 1-(4). High frequency characteristics (SP6T) Sample: ARD30012 Measuring method: Measured with Agilent Technologies network analyzer (HP8510). • V.S.W.R. • Insertion loss 0 1.9 0.1 10 1.7 1.6 1.5 Standard value 1.4 20 0.3 30 0.4 0.5 Standard value 0.6 1.3 Reference value 1.2 Reference value 0.2 Isolation, dB Insertion loss, dB 0 1.8 V.S.W.R. • Isolation 2.0 40 50 0.7 70 0.8 80 1.1 0.9 90 1.0 1.0 100 1GHz 4GHz 8GHz 12.4GHz Frequency 18GHz 1GHz 4GHz 8GHz 12.
PAGE 9
RD (ARD) DIMENSIONS (mm inch) The CAD data of the products with a CAD Data 1. SPDT 1) Solder terminal 3.5 .138 3.5 .138 2.0 .079 CAD Data 4.3 .169 mark can be downloaded from: http://industrial.panasonic.com/ac/e/ 11.2 .441 Solder terminal NC COM NO Indicator Coil GND + 40.0 1.575 7.0 .276 0.3 .012 3.5 .138 Serial No. 4.5 .177 2-3.1 dia. 2-.122 dia. 2-2.4 dia. 2-.094 dia. 7.2 .283 6GHz type 7.3 .287 2.1 .083 3-SMA connector 11.2 .441 22.4 .882 30.0 1.181 34.0 1.339 13.2 .
PAGE 10
RD (ARD) 2) Connector cable CAD Data Pin No. Fail-safe Latching Latching with TTL driver 1 – – 2 NC 1 Indicator 3 COM COM 4 NO 2 5 – – 6 – – 7 GND GND Coil – 1 COM 2 – V GND 8 + 1 9 – 2 Logic 1 Logic 2 D-sub connector pin contact type 2345 Pin No. 1 6789 12.55 .494 3.05 dia. .120 dia. 25.0 .984 30.8 1.213 5.95 .234 1.2 .047 Vinyl chloride electric wire 110.0±10 4.331±.394 NC COM NO Indicator GND + 40.0 1.575 Serial No. 4.5 .177 Coil 2-3.1 dia. 2-.122 dia. 2-2.4 dia. 2-.
PAGE 11
RD (ARD) 2. Transfer CAD Data 5.08 .200 45.70 1.799 15.24 .600 Max. 5.0 .197 5.08 .200 2.00 .079 0.30 .012 5.08 .200 Solder terminal 3-3.80 dia. 3-.150 dia. Coil 20.3 .799 GND + Indicator NC COM NO 10.15 .400 9.65 40.0 .380 1.575 Serial No. J1 J3 9.65 .380 J2 J4 4-SMA connector 32.0 1.260 16.2 .638 7.2 .283 J2 J1 32.0 1.260 16.2 .638 1 to 1.5 .039 to .059 J3 J4 Tolerance: ±0.3 ±.012 55.5 2.
PAGE 12
RD (ARD) 3. SP6T CAD Data 80.0 3.150 66.0 2.598 7-5.08 7-.200 a. di a. 5 di 4. 7 4- -.17 4 25.4 66.0 80.0 1.000 2.598 3.150 Max. 4.5 Max. .177 78.0 dia. 3.071 dia. J2 J3 3.0 .118 COM1 2 3 4 5 6 Serial No. Ind Coil MADEIN JAPAN 40.50 1.594 J4 J1 COM GND 1 2 3 4 5 6 J6 J5 (Bottom view) 7.2 .283 J2 J3 56 .0 2.2 dia. 05 dia . J1 7-SMA jack connector J4 COM J6 J5 Tolerance: ±0.3 ±.
PAGE 13
RD (ARD) 4. SP6T (with termination) CAD Data 80.0 3.150 66.0 2.598 7-5.08 7-.200 a. di ia. 5 d 4. 77 4 -.1 4 25.4 66.0 80.0 1.000 2.598 3.150 Max. 4.5 Max. .177 J2 J3 Serial No. 3.0 .118 MADE IN JAPAN 40.50 1.594 J4 J1 COM 1 2 3 4 5 6 Ind Coil GND 1 2 3 4 5 6 COM J6 J5 (Bottom view) 7.2 .283 J3 J2 56.0 2.20 dia. 5 dia . 7-SMA jack connector 6-termination J1 J4 COM J6 J5 Tolerance: ±0.3 ±.
PAGE 14
RD (ARD) NOTES 1. For general cautions for use, please refer to the “General Application Guidelines”. 2. Coil operating power Pure DC current should be applied to the coil. The wave form should be rectangular. If it includes ripple, the ripple factor should be less than 5%. However, check it with the actual circuit since the characteristics may be slightly different. The nominal operating voltage should be applied to the coil for more than 50 ms to set/reset the latching type relay.