Datasheet
HE 1 Form A (AQV25, AQV25H)
2
ds_x615_en_aqv25_25_h: 011212J
2. Electrical characteristics (Ambient temperature: 25C 77F)
*Turn on/Turn off time
RECOMMENDED OPERATING CONDITIONS
Please obey the following conditions to ensure proper device operation and resetting.
Dimensions
Schematic and Wiring Diagrams
Cautions for Use
■ These products are not designed for automotive use.
If you are considering to use these products for automotive applications, please contact your local Panasonic technical
representative.
Please refer to our information on PhotoMOS Relays for Automotive Applications.
Continual DC bias (for AQV258, AQV259)
In cases in which a continual DC bias is applied between the input and output, the output-side MOS-FET may deteriorate
due to the voltage. Therefore, please verify operation of the actual design before using. An example of a circuit that might
undergo MOS-FET deterioration due to voltage is given below.
Item
Sym-
bol
Type
of con-
nection
AQV251(A) AQV252(A) AQV255(A) AQV257(A) AQV253(A) AQV254(A) AQV259(A) AQV258(A)
AQV253H(A) AQV254H(A) AQV256H(A)
Condition
Input
LED operate current
Typical
IFon —
0.9 mA 1.4 mA
IL = Max.
Maximum 3 mA
LED turn off current
Minimum
IFoff —
0.4 mA
IL = Max.
Typical 0.8 mA 1.3 mA
LED dropout voltage
Typical
VF —
1.25 V (1.14 V at IF = 5 mA)
IF = 50 mA
Maximum 1.5 V
Output
On resistance
Typical
R
on A
0.6 0.74 1.8 2.6 5.5 12.4 85 345 5.5 12.4 20
I
F = 5 mA
I
L = Max.
Within 1 s
on time
Maximum 1 1.4 2.5 4 8 16 200 500 8 16 30
Typical
R
on B
0.3 0.37 0.9 1.4 2.7 6.2 60 345 2.7 6.2 15
I
F = 5 mA
I
L = Max.
Within 1 s
on time
Maximum 0.5 0.7 1.25 2 4 8 100 500 4 8 20
Typical
R
on C
0.15 0.18 0.45 0.7 1.4 3.1 30 160 1.4 3.1 7.5
I
F = 5 mA
I
L = Max.
Within 1 s
on time
Maximum 0.25 0.35 0.63 1 2 4 50 250 2 4 10
Off state leakage
current
Maximum I
Leak —1 A 10 A1 A
I
F = 0 mA
V
L = Max.
Transfer characteristics
Turn on time*
Typical
Ton —
1.7 ms 1.4 ms 0.9 ms 1.5 ms 0.8 ms 0.6 ms
0.35 ms
2.4 ms 1.8 ms 1.2 ms
I
F = 5 mA
I
L = Max.
Maximum 3 ms 2 ms 3 ms 2 ms 1 ms 4 ms 3ms
Turn off time*
Typical
T
off —
0.07 ms
0.09 ms
0.1 ms
0.06 ms 0.05 ms
0.04 ms
0.06 ms 0.05 ms 0.06 ms
IF = 5 mA
I
L = Max.
Maximum 0.2 ms
I/O capacitance
Typical
C
iso —
1.3 pF
f = 1 MHz
V
B = 0 V
Maximum 3 pF
Initial I/O isolation
resistance
Minimum R
iso — 1,000 M 500 V DC
Item Symbol Recommended value Unit
Input LED current I
F
Standard type: 5
Reinforced insulation type: 5 to 10
mA
To n
Input
Output 10%
90%
To f f