Datasheet

ManualsBrandsPANASONIC ManualsSolid State RelaysPhotoMOS Relay Number of pins 4 Pin -

PHOTOVOLTAIC MOSFET DRIVER (APV1,2)

en_ds_apv1_2: 040906J

TYPES

Notes: *1 SOP type is picked from 1/2-pin side, SSOP type is picked from 1/4-pin side

*2 SOP type is picked from 3/4-pin side, SSOP type is picked from 2/3-pin side

*3 Tape package is the standard packing style. Also available in tube.

(Part No. suffix “X” or “Y” is not needed when ordering; Tube: 100 pcs.; Case: 2,000 pcs.)

For space reasons, the initial letters of the product number “AP” and “S” are omitted on the product seal.

The package type indicator “X” and “Z” are omitted from the seal. (Ex. the label for product number APV1121SX is V1121).

*4 Tape package is the standard packing style.

For space reasons, the initial letters of the product number “AP” and “V” are omitted on the product seal.

The package type indicator “Y” and “W” are omitted from the seal. (Ex. the label for product number APV2111VY is V2111).

RATING

1. Absolute maximum ratings (Ambient temperature: 25°C 77°F)

PHOTOVOLTAIC

MOSFET DRIVER

PHOTOVOLTAIC

MOSFET DRIVER

(APV1,2)

Type

Output rating Part No.

Packing quantity

Drop-out

voltage

(Typ.)

Short circuit

current

(Typ.)

Through hole

terminal

Surface-mount terminal

Tube packing

style

Tube packing

style

Tape and reel packing style

Tube

Tape and

reel

Picked from

1/2/3-pin side*

Picked from

4/5/6-pin side*

DIP6pin 8.7V 14µA APV1122 APV1122A APV1122AX APV1122AZ

1 tube contains 50 pcs.

1 batch contains 500 pcs.

1,000 pcs.

SOP4pin 8.7V 14µA — — APV1121SX APV1121SZ

—

SOP4pin*

8.2V 8µA — — APV2121SX APV2121SZ

SSOP

8.2V 8µA — — APV2111VY APV2111VW — 3,500 pcs.

Item Symbol APV1122(A) APV1121S APV2121S APV2111V Remarks

Input

LED forward current I

F 50mA

LED reverse voltage V

R 5V

Peak forward current I

FP 1A

f = 100 Hz,

Duty Ratio = 0.1%

Power dissipation P

in 75mA

I/O isolation voltage V

iso 5,000V AC 2,500V AC 2,500V AC 1,500V AC

Temperature

limits

Operating T

opr –40°C to +85°C –40°F to +185°F

Non-condensing at

low temperatures

Storage T

stg –40°C to +100°C –40°F to +212°F

Control circuit

FEATURES

1. High-speed switching

Since release time is 0.1 ms, the

MOSFET or other load can be turned off

quickly in urgent situations.

2. Space saving

With a built-in control circuit, an external

resistor is not needed. This contributes to

making substrates more compact.

3. High insulation

DIP type: 5,000 V

SOP type: 2,500 V

SSOP type: 1,500 V

4. Extensive product lineup

Products include the industry’s smallest

SSOP type, SOP4 type, and DIP 6 type.

TYPICAL APPLICATIONS

MOSFET driver

Power supply (Vcc) for electronic

circuits

Summary of content (3 pages)

PAGE 1
PHOTOVOLTAIC MOSFET DRIVER (APV1,2) PHOTOVOLTAIC MOSFET DRIVER (APV1,2) PHOTOVOLTAIC MOSFET DRIVER 6 Control circuit 1 2 3 4 Control circuit 1 4 2 3 FEATURES TYPICAL APPLICATIONS 1. High-speed switching Since release time is 0.1 ms, the MOSFET or other load can be turned off quickly in urgent situations. 2. Space saving With a built-in control circuit, an external resistor is not needed. This contributes to making substrates more compact. 3.
PAGE 2
PHOTOVOLTAIC MOSFET DRIVER (APV1,2) 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item Symbol Typical LED operate current Maximum Minimum LED turn off current Input Typical Typical LED dropout voltage Maximum Minimum Drop-out voltage* Typical Output Minimum Short circuit current** Transfer characteristics Typical IFon IFoff VOC ISC Typical Ton Turn off time*** Typical Toff Typical Maximum Initial I/O isolation resistance Minimum APV1121S APV2121S 0.
PAGE 3
PHOTOVOLTAIC MOSFET DRIVER (APV1,2) REFERENCE DATA 3. LED operate current vs. ambient temperature characteristics Input current: 10mA Input current: 10mA Drop-out voltage: 5V 14 25 10 APV1122 APV1121S 8 6 4 -20 0 20 40 60 20 15 APV1122 APV1121S 10 5 APV2121S APV2111V -40 3 APV2121S APV2111V 0 80 85 LED operate current, mA 12 Short circuit current, A 2. Short circuit current vs. ambient temperature characteristics Drop-out voltage, V 1. Drop-out voltage vs.