Datasheet

15
MP Motion Sensor (AMN1,2,4)
3. Spot detection type
4. 10m detection type
5. Notes regarding the detection zone
The detection zone has the polarity shown in the diagram on the right.
When targets enter both the + and – zones with the same timing, the
signals are cancelled each other, thus in this case there is a possibility
that the object cannot be detected at the maximum specified detection
distance.
X-Y cross section
X-Y cross section
TOP VIEW
2m
5.562ft
0
1.25
4.101
2.5m
8.202ft
2.5
8.202
1.25
4.101
5m
16.404ft
X
19°
19°
0°
2.5
8.202
5m
16.404ft
TOP VIEW
55°
5m
16.404ft
10m
32.808ft
5m
16.404ft
10m
32.808ft
X
SIDE VIEW
46.5°
Y
5m
16.404ft
10m
32.808ft
5m
16.404ft
10m
32.808ft
Detection zone
4
13.123
6
19.685
4
13.123
Y
X
6m
19.685ft
6m
19.685ft
(15.9m 52.165ft)
4
13.123
4
13.123
2
6.562
2
6.562
8
26.247
10m
32.808ft
6
19.685
8
26.247
10m
32.808ft
2
6.562
2
6.562
(12.3m 40.354ft)
SIDE VIEW
Y
11°
11°
0°
2m
5.562ft
0
1.25
4.101
2.5m
8.202ft
2.5
8.202
1.25
4.101
5m
16.404ft
2.5
8.202
5m
16.404ft
Y
X
1m
3.281ft
1m
3.281ft
(Max. 2m)
(Max. 6.562ft)
(Max. 1.4m)
(Max. 4.593ft)
0.5
1.640
0.5
1.640
0.5
1.640
0.5
1.640
1m
3.281ft
1m
3.281ft
Remarks: 1. The X-Y cross-sectional diagram shows the detection area.
2. The differences in the detection zone patterns are indicative of the projections of the 6 lenses with single focal point and with two optical
axes. An object whose temperature differs from the background temperature and which crosses inside the detection zone will be detected.
Remarks: 1. The X-Y cross-sectional diagram shows the detection area.
2. The differences in the detection zone patterns are indicative of the projec-
tions of the 20 lenses with single focal point and with five optical axes. An
object whose temperature differs from the background temperature and
which crosses inside the detection zone will be detected.
Detection zone
Target
MP MOTION SENSOR 2004.11.1 7:02 PM Page 15