Datasheet

AM1 (NZ) Basic Switches
–8–
AECTB8E 201408-T
■ Oil tight types
Hinge lever
Hinge short roller lever
Hinge roller lever
CAUTIONS FOR USE
AM1511F (Solder terminal)
AM1711F (Screw terminal)
26.1
R63.5
20.1±0.5
OP
FP
4.8
Lever: Stainless steel
Plunger seal
Operating Force OF, max. 0.69 N
Release Force RF, min. 0.14 N
Pretravel PT, max. 10 mm
Movement Differential
MD, max.
1.5 mm
Overtravel OT, min. 5.6 mm
Operating Position OP 19.1±0.7 mm
CAD Data
AM1514F (Solder terminal)
AM1714F (Screw terminal)
26.1
R26.7
20.1±0.5
16.9±0.8
OP
FP
Plunger seal
Roller 9.5 dia.×4:
Plastic
Operating Force OF, max. 1.67 N
Release Force RF, min. 0.42 N
Pretravel PT, max. 4.5 mm
Movement Differential
MD, max.
0.7 mm
Overtravel OT, min. 2.4 mm
Operating Position OP 30.2±0.4 mm
CAD Data
The photograph is a case of a screw terminal. The dimension is an intersection except a terminal section.
Please refer to “TERMINAL STYLE” for the shape and size of terminal section.
AM1513F (Solder terminal)
AM1713F (Screw terminal)
26.1
R48.3
20.1±0.5
16.9±0.8
OP
FP
Plunger seal
Roller 9.5 dia.×4:
Plastic
Operating Force OF, max. 0.98 N
Release Force RF, min. 0.20 N
Pretravel PT, max. 7.5 mm
Movement Differential
MD, max.
1.3 mm
Overtravel OT, min. 3.6 mm
Operating Position OP 30.2±0.7 mm
CAD Data
■ Regarding fastening of switch body
In fastening the switch body, use M4 mounting screws to attach
switches with the torque 1.5 N·m or less.
■ Soldering operations
Soldering should be done in less than 5 seconds, with iron (tip
temperature 350°C max.). Care should be taken not to apply
force to the terminal during soldering.
■ Panel mount type
1) When mounting the panel, tighten the hex nut for actuator to
less than 4.0 N·m.
2) Mounting hole dimensions are as shown below.
■ Environment
Avoid using and storing these switches in a location where they
will be exposed to corrosive gases, silicon, or high dust levels, all
of which can have an adverse effect on the contacts.
12.5 dia.
5
12.5 dia.
13
Mounting hole dimensions
Panel mount
plunger
Panel mount roller
plunger