Datasheet

AM1 (NZ) Basic Switches
–2–
AECTB8E 201408-T
PRODUCT TYPES
■ Standard type
Standard packing for inner carton: 20cps.
Note: Standard part number indicates UL/C-UL (CSA standard) mark.
■ Oil tight types
Standard packing for inner carton: 20cps.
Note: Standard part number indicates UL/C-UL (CSA standard) mark.
SPECIFICATIONS
■ Contact Rating
■ Characteristics
Actuator
Terminal style
Solder terminal Screw terminal
Pin plunger AM1100F AM1300F
Over travel plunger AM1105F AM1305F
Compact over travel plunger AM1106F AM1306F
Panel mount plunger AM1107F AM1307F
Panel mount roller plunger AM110811F AM130811F
Panel mount cross roller plunger AM110812F AM130812F
Flexible leaf lever AM1101F AM1301F
Flexible roller leaf lever AM1103F AM1303F
Hinge lever AM1501F AM1701F
Hinge short roller lever AM1504F AM1704F
Hinge roller lever AM1503F AM1703F
One way type hinge short roller lever AM1544F AM1744F
One way type hinge roller lever AM1543F AM1743F
Reversed action type hinge lever AM1531F AM1731F
Reversed action type hinge short roller lever AM1534F AM1734F
Reversed action type hinge roller lever AM1533F AM1733F
Actuator
Terminal style
Solder terminal Screw terminal
Hinge lever AM1511F AM1711F
Hinge short roller lever AM1514F AM1714F
Hinge roller lever AM1513F AM1713F
Type Voltage
Resistive load
(cos
φ = 1)
Inductive load
(cos
φ = 0.4)
Motor or lamp load
NC NO
Standard type
125 V AC 10 A 6 A 3 A 1.5 A
250 V AC 10 A 6 A 2 A 1 A
480 V AC 1 A 0.5 A — —
125 V DC 0.5 A 0.05 A — —
250 V DC 0.25 A 0.03 A — —
Oil tight type
125 V AC 10 A 6 A 3 A 1.5 A
250 V AC 10 A 6 A 2 A 1.0 A
125 V DC 0.5 A 0.05 A — —
Item Specifications
Expected life
Mechanical
Pin plunger types
Min. 2 ×10
7
(60 cpm) (OT: specified value)
(Oil tight: Min. 1.5 ×10
6
)
Other actuator types
Min. 5 ×10
6
(60 cpm) (OT: specified value)
(Oil tight: Min. 1.5 ×10
6
)
Electrical (OT: Max.)
Min. 5 ×10
5
(20 cpm) (at rated load)
(Oil tight: Min. 1.5 ×10
5
)
Insulation resistance Min. 100 MΩ (at 500 V DC)
Dielectric strength
Between non-continuous terminals 1,000 Vrms for 1 min.
Between each terminal and other exposed metal parts 2,000 Vrms for 1 min.
Between each terminal and ground 2,000 Vrms for 1 min.
Contact resistance (initial) Max. 50 mΩ (by voltage drop, 1 A, 6 to 8 V DC)
Vibration resistance (Pin plunger type) Single amplitude: 0.75 mm, 10 to 55 Hz (contact opening: max. 1 msec.)
Shock resistance
Pin plunger types Min. 300 m/s
2
(contact opening: max. 1 msec.)
Other actuator types Min. 50 m/s
2
(contact opening: max. 1 msec.)
Allowable operating speed (at no load) 0.1 to 1,000 mm/sec. (at pin plunger position)
Max. operating cycle rate (at no load) 240 cpm
Ambient temperature –25°C to +80°C (no freezing and condensing)
Unit weight Approx. 20 to 55 g
Contact specifications Contact material Ag alloy
Protection grade IP40