User manual

BASIC OPERATIONS
BASIC OPERATIONS
65
Redialing
Automatic Redialing
Manual Redialing (see Note 1)
You can also redial the last dialed number manually by pressing key.
If a busy line is detected, the machine will redial the number up to 5
times at 3 minute interval. However, if a busy line is not detected, the
machine will redial only one time. During that time, a message will
appear as shown to the right.
A file number is shown in the upper right hand corner of the display if it
is a memory transmission file.
NOTE
1. While the unit is displaying "WAIT TO DIAL", you can press to start redialing immediately.
1
Set original(s) face down..
2
Make sure that "MEMORY XMT" is displayed, if
"DIRECT XMT" appears, press to
change to Memory Transmission.
3
4
The document(s) are stored into memory with a file
number. Then the machine dials the last dialed
number.
MEMORY XMT NO.014
WAIT TO DIAL
SALES DEPT
JOB
STATUS
MEMORY XMT
XMT MODE ORIGINAL
LIGHTER DARKER
1/1
AMERICA ASIA CHINA
AFRICA BERLIN
ANTARCTICA BRAZIL
APOLLO CANADA
REDIAL
REDIAL
MEMORY XMT
XMT MODE
MEMORY XMT STN(S):0000
9 555 1234_
JOB
STATUS
MEMORY XMT
XMT MODE ORIGINAL
LIGHTER DARKER
1/1
AMERICA ASIA CHINA
AFRICA BERLIN
ANTARCTICA BRAZIL
APOLLO CANADA
Sending Documents