User manual

11
For DP-1510P/1810P
Control Panel
LCD Display
Warning Indications
J Add Paper
? Add Toner
I Misfeed
2 Call Service
No Contents Refer to
2 STOP Key C Stops the copy run. ——
3 START Key C Used to start an operation. ——
4
INTERRUPT Key, MEMORY IN Key, M1/M2 Keys
C Interrupt Key interrupts other copy or print jobs while making copies.
C Memory In Key registers two copy jobs for recall at a later time.
C M1/M2 Keys are used to store a Job in Memory or to recall a Job stores in Memory.
Pages 22, 24
5
Cursor Keys
CC
CC
C Select copy ratio and function modes using (G or F).
——
6 PAPER TRAY Key
CC
CC
C Used to select the paper tray manually. ——
7
COPY SIZE Key
C Used to select Reduction/Enlargement only. For additional details, see page 13.
——
8
ORIGINAL SIZE Key
C Used to select the original size manually. For additional details, see page 13.
——
9 PRINT Key
CC
CC
C When selecting the Printer ON/OFF Line. ——
NOTE
C The Control Panel displayed above shows only copier functions. Please refer
to the appropriate operating instructions for other control panel functions or in
the Panasonic Document Management System CD-ROM for the Printer
control panel functions.
Before Starting
:
2-Sided/1-Sided Copy Key
C Used to select 1 \ 2, 2 \ 2 and 2 \ 1, Book \ 2 copying
——