Panasonic Broadcast AK-HC931B Menu Information
Menu operations Basic setting menu operations _ Displaying the menus _ Entering the menu data After accessing the item menus, enter the respective data. User menu 1 Press the MENU button. The camera’s USER menu screen now appears on the viewfinder or monitor. 1 VF Setting1 Side Modulation Zone Mark Safety Mark Center Mark Center Mark Sel Line Width USER MENU Operation Painting Maintenance 2 2 3 Turn the JOG dial to select the menu item to be set.
Menu operations _ Entering the menu data (continued) When the setting flashes one character at a time, press the JOG dial to move the flashing toward the right. 1 When the JOG dial is pressed, flashing moves toward the right. Cam Setting3 RET RET RET RET ID ID ID ID RET1 RET2 RET3 RET4 :ABCD1001 :EFGH2001 :IJKL3001 :WXYZ4001 Cam Setting3 RET RET RET RET 2 ID ID ID ID RET1 RET2 RET3 RET4 :ABCD1001 :EFGH2001 :IJKL3001 :WXYZ4001 Turn the JOG dial to change the setting.
Setting menu configuration Hierarchical menus Operation 24 VF Setting1 Viewfinder settings1 Side Modulation (for changing the brightness level of the signals outside the zone markers) Zone Mark (13:9/4:3/OFF) (for setting the zone markers) Safety Mark (16:9/4:3/OFF) (for setting the safety markers) Center Mark (for setting the center marker) Center Mark Sel (for setting the shape of the center marker) Line Width (for changing the thickness of the VF markers) VF Setting2 Viewfinder settings2 VF DTL (for
Setting menu configuration Hierarchical menus Painting CAM SETTING SW Image ON/OFF settings FLARE (for setting the flare to ON or OFF) BLACK GAMMA (for setting the black gamma to ON or OFF) GAMMA (for setting the gamma to ON or OFF) KNEE (for setting the knee to ON or OFF) WHITE CLIP (for setting the white clip to ON or OFF) MATRIX (for setting the matrix to ON or OFF) DTL (for setting DTL to ON or OFF) FLESH DTL (for setting the flesh tone DTL to ON or OFF) BLACK SHD Black shading adjustments B H SAW R
Setting menu configuration Hierarchical menus Painting Color Correct1 Matrix adjustments G SAT (for adjusting the Green gain) G PHASE (for adjusting the Green phase) G_Cy SAT (for adjusting the G_Cy gain) G_Cy PHASE (for adjusting the G-Cy phase) Cy SAT (for adjusting the Cy gain) Cy PHASE (for adjusting the Cy phase) Cy_B SAT (for adjusting the Cy_B gain) Cy_B PHASE (for adjusting the Cy_B phase) B SAT (for adjusting the B gain) B PHASE (for adjusting the B phase) B_Mg SAT (for adjusting the B_Mg gain) B_