Panasonic Broadcast AK-HC900 Menu Information
Setting of Menu Items _ Configuration of menu display screen USER MENU 1.MAINTENANCE 2.SETTING 3.CAM ID 4.FILE MENU Maintenance menu ° MAINTENANCE ° 1.BLACK SHADING 2.PED,GAMMA,FLARE 3.KNEE,WHITE CLIP 4.R/B GAIN 5.DTL 6.GAIN,AUTO IRIS 7.S.GAIN 1 8.S.GAIN 2 9.S.GAIN 3 10.FRAME MODE 11.COLOR CORRECTION1 12.COLOR CORRECTION2 USER MENU Using condition setting menu °° SETTING°° 1.MODE 2.SHUTTER 3.H.
Setting of Menu Items _ USER menu (Initial screen) USER MENU The readout data at start of power supply is the data just before cutting off the power supply, and the operation is started with the data. 1. MAINTENANCE It sets various adjusting data. 2. SETTING It sets various modes. 3. CAM ID It sets the camera ID. 4. FILE MENU It executes file loading and saving, and makes the basic setting of data display. 1.MAINTENANCE 2.SETTING 3.CAM ID 4.
Setting of Menu Items ! Maintenance menu ≥ Move the cursor (arrow mark) to the item to be adjusted and press the MENU key, then it enters the adjustment menu thereunder. ≥ Move the cursor to MAINTENANCE and press the MENU key, then it returns to USER MENU. °MAINTENANCE° 1.BLACK SHADING 2.PED,GAMMA,FLARE 3.KNEE,WHITE CLIP 4.R/B GAIN 5.DTL 6.GAIN,AUTO IRIS 7.S.GAIN 1 8.S.GAIN 2 9.S.GAIN 3 10.FRAME MODE 11.COLOR CORRECTION1 12.
Setting of Menu Items ! Maintenance menu 2 Pedestal, gamma, flare adjustment menu M PED: Master pedestal can be adjusted only by turning the control panel VR. The R, G, B pedestal can be totally adjusted. R, B PED: R, B pedestal adjustment. Besides the master pedestal adjustment, R, B pedestal can be independently adjusted. It is not related to DATA REF. The numeral display after normal ending of ABB is “0” for both of R, B. M GAMMA: Master gamma adjustment. The R, G, B gamma can be totally adjusted.
Setting of Menu Items ! Maintenance menu °° KNEE,WHITE CLIP M KNEE POINT R KNEE POINT B KNEE POINT M KNEE SLOPE R KNEE SLOPE B KNEE SLOPE A.KNEE POINT A.KNEE LVL WHITE CLIP LVL KNEE WHITE CLIP 3 Knee&white clip adjustment menu M KNEE POINT: Master knee point adjustment. G, B, R knee point can be totally adjusted. R, B KNEE POINT: R, B knee point adjustment. Besides the master knee point adjustment, R, B knee point can be independently adjusted. M KNEE SLOPE: Master knee slope adjustment.
Setting of Menu Items ! Maintenance menu °° R/B GAIN 4 Gain adjustment menu The gain of R, B GAIN is adjusted. The difference from the state of being white-balanced can be adjusted. ≥ The numeral value displayed after normal ending of AWB is “0” for both of R, B. °° R GAIN B GAIN :+000 :+000 5 Detail adjustment menu DTL: Setting of valid/invalid of detail function. TOTAL DTL LVL: Horizontal and vertical detail level adjustment.
Setting of Menu Items ! Maintenance menu 5 Detail adjustment menu (continued from previous page) DTL (i): Setting of DTL at the edge in positive direction. DTL (j): Setting of DTL at the edge in negative direction. DTL CLIP: Setting of clip level of DTL edge. DTL SOURCE: Setting of video source [G, R, (3G+R) /4, (2G+R+B) /4, (G+B/2)] to create the detail. °° DTL °° DTL TOTAL DTL LVL H DTL LVL CRISP LVL DEPENDENT PEEK FREQUENCY KNEE APERTURE KNEE APA.
Setting of Menu Items ! Maintenance menu °° S GAIN 1°° GAIN ° TOTAL ANLG GAIN PIX MIX V MIX FRAME MIX H DTL LVL CRISP LEVEL DEPENDENT PEAK FREQUENCY M GAMMA MASTER PED OFFSET R PED OFFSET B PED OFFSET 7 Super gain, Detail, Pedestal-offset level setting menu TOTAL GAIN: Total gain in analog, pixel addition, and memory addition is displayed. ANLG GAIN: Gain setting in analog. PIX MIX: Gain setting in horizontal pixel addition. Capable of setting 0/6 dB. V MIX: Gain setting in vertical pixel addition.
Setting of Menu Items ! Maintenance menu < COLOR CORRECTION1 > SAT PHASE R +00 +00 Mg +00 +00 B +00 +00 Cy +00 +00 G +00 +00 Y1 +00 +00 9 Color correction 1 menu Adjustment of gain (saturation) and phase of each color. < COLOR CORRECTION2 > SAT PHASE R - Mg +00 +00 Mg - B +00 +00 B - Cy +00 +00 Cy - G +00 +00 G - Y1 +00 +00 Y1 - R +00 +00 qZ Color correction 2 menu Adjustment of gain and phase of matrix.
Setting of Menu Items @ Setting menu - Menu for various settings. °° SETTING°° 1.MODE 2.SHUTTER 3.H.PHASE 1 Camera mode setting menu BLACK STRETCH: Setting of the function of expanding low-brightness analog video level. It is set by ON/OFF. D5600K: It is able to make color temperature correction of about 5600 degrees of electric color temperature correcting file. It is set by ON/OFF. ANLG OUTPUT SEL: Video output YPbPr/RGB is changed over. It is usually set to YPbPr.
Setting of Menu Items @ Setting menu 2 Electronic shutter setting menu SHUTTER MODE: It selects the shutter operation. ON/SYNCHRO/OFF can be selected. ON # Setting of normal discrete shutter speed. SYNCHRO # Setting of synchro scan mode. SHUTTER SPEED: Setting of normal shutter speed. SYNCHRO SCAN: Setting of synchro scan mode. Shutter speeds of 60 Hz to 120 Hz can be continuously changed. °° SHUTTER°° SHUTTER MODE SHUTTER SPEED SYNCHRO SCAN :OFF :1/100 :75.
Setting of Menu Items # Camera ID setting menu °°CAM ID °° ID:AKHC900 $ File managing and renewing menu - File operation menu : blinking display. 1 The file selected by FILE is loaded. It can be selected from [PRESET/ USER1 / USER2 /CURRENT]. When desired to return to the previous data after loading other file, select “CURRENT.
Setting of Menu Items $ File managing and renewing menu - File operation menu (continued) 2 When saving the current data, two files (USER1 /USER2) can be saved. Select the file by “SAVE FILE?” Select “USER1” and move the cursor to SAVE and press the MENU key, then the item menu is displayed. 3 SAVE IN USER1. OK? “YES” and “NO” are displayed. Move the cursor from “NO” to “YES” and check that “YES” blinks. 4 When the menu key is pressed, “SAVE COMPLETE” appears, then “SAVE” of the file is completed.
