Menu Information

32
Table of adjustment setting ranges
Operation
Menu Item Adjustment setting range Initial value Items recorded on SD memory cards
VF Setting1
Side Modu SW OFF, ON OFF

No switching from the SD memory
card to the camera settings possible
while the buildup unit is connected.
Side Modu LVL 0 to 31 31

No switching from the SD memory
card to the camera settings possible
while the buildup unit is connected.
Zone Mark OFF, 4:3, 13:9, 14:9, 15:9, 16:9 OFF

No switching from the SD memory
card to the camera settings possible
while the buildup unit is connected.
Safety Mark1 16:9, 15:9, 14:9, 13:9, 4:3, OFF OFF

Safety Area1 80 %, 90 %, 93 %, 100 % 93 %

Safety Mark2 16:9, 15:9, 14:9, 13:9, 4:3, OFF OFF

Safety Area2 80 %, 90 %, 93 %, 100 % 80 %

Center Mark OFF, ON OFF

Center Mark SEL 1 to 4 1

Line Width 1 to 3 2

Marker Level 100 %, 75 %, 50 % 100 %

VF Setting2
VF DTL 0 to 23 10

HD Peak FREQ
12.4M, 12.5M, 12.7M, 12.9M, 13.0M, 13.3M,
13.6M, 13.9M, 14.2M, 14.6M, 15.0M, 15.5M,
16.1M, 16.7M, 17.3M, 18.0M, 18.6M, 18.8M,
19.0M, 19.2M, 19.5M, 19.9M, 20.3M, 20.9M,
21.5M, 22.4M, 23.6M, 25.4M, 28.6M, 37.1M
12.4M

HD Offset Gain 0 to 5 0

HD Crisp 0 to 63 0

D1 Peak FREQ 2.0M, 2.3M, 2.7M, 3.4M, 4.5M, 6.8M, 13M 6.8M

D1 Offset Gain 0 to 5 0

D1 Crisp 0 to 63 0

VBS Peak FREQ 2.0M, 2.3M, 2.7M, 3.4M, 4.5M, 6.8M, 13M 6.8M

VBS Offset Gain 0 to 5 0

VBS Crisp 0 to 63 0

Cursor
Cursor OFF, ON OFF

Cursor Memory ADJ, 1, 2, 1+2 ADJ

H Position 0 to 255 127
V Position 0 to 255 127
Width 0 to 255 127
Height 0 to 255 127
BOX/CROSS BOX, CROSS BOX
Store Memory MEM1, MEM2 MEM1
EXECUTE NO?, YES? NO?
VF Display1
F Number OFF, ON OFF

Zoom OFF, ON OFF

Focus OFF, ON OFF

Extender OFF, ON OFF

MONI OUT OFF, ON OFF

Filter OFF, ON OFF

M Gain OFF, ON OFF

Shutter OFF, ON OFF

5600K OFF, ON OFF

Audio Level OFF, ON OFF

VF Display2
OPT Level OFF, ON OFF

RET Select OFF, ON OFF

Status OFF, ON OFF

Status(AUTO) OFF, ON OFF

Field Rate OFF, ON OFF

Voltage OFF, ON OFF

WFM (*1) OFF, ON OFF

White CH OFF, ON OFF

Setting1 FAN Power OFF, ON, AUTO ON
FAN Mode LOW, NORM NORM
CALL+R_TALLY OFF, ON OFF

CALL+T_TALLY OFF, ON OFF

PinP Mode — —
*1: Waveforms are displayed as a single line at the center of the screen. They appear at the bottom right when the
aspect ratio is set to 16:9, but when an aspect ratio of 4:3 is set on the viewfinder or when the side panel mode is
selected by the down-converter, the waveform display will be cut off in part.