Multi Purpose Camera Operating Instructions
Table Of Contents
- TABLE OF CONTENTS
- Accessories
- Introduction
- Characteristics
- Precautions for use
- Major operating controls and their functions
- How to install
- How to set up the system
- Configuration example 1: Connection of camera controller
- Configuration example 2: High-speed P/T system (1)
- Configuration example 3: High-speed P/T system (2)
- Configuration example 4: Controlling the camera from the AW-RP655 or AW-RP555 controller
- Control exercised from the AW-CB400.
- When the camera is to be controlled from the AW-RP655 controller
- When the camera is to be controlled from the AW-RP555 controller
- Cable wiring specifications when connecting the camera directly to the AW-CB400, AW-RP655 or AW‑RP555
- Operation procedure
- How to adjust
- Intelligent functions
- Setting of menu items
- Appearance
- Specifications
- 67 -
Setting of menu items
Scene file items indicated by “”
SETTING 5.INTELLIGENT1
6.INTELLIGENT2
INTELLIGENT
INTELLIGENT MODE
ND FILTER SELECT
AGC SPEED
AGC GAIN STEP
HI LIGHT DETECT
IRIS RANGE
ATW AREA
ATW SPEED
D5600K
AGC MODE
AGC MAX GAIN
PIX MIX
V MIX
FRAME MIX
SUB MENU
7.INTELLIGENT SET
INTELLIGENT
ATW WIDTH
IRIS ON LOCK
CAMERA ID ID:
When a scene file is loaded, there may be inconsistencies in some of the items between
the status of the connected controller and the status of the camera.
When the controller is operated in this status, the status of the controller will be reflected.