Panasonic Broadcast AJ-SPX800 Menu Information
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ Chapter 8 Menu Description Tables 8-1 Menu Configuration MENU USER MENU MAIN MENU SYSTEM SETTING ROP MATRIX COLOR CORRECTION LOW SETTING MID SETTING HIGH SETTING ADDITIONAL DTL SKIN TONE DTL KNEE/LEVEL GAMMA FLARE CAMERA SETTING PAINT OPTION MENU OPTION VF CAM OPERATION Opening the Menus MAIN OPERATION USER MENU: Displayed when the MENU button is pressed. FILE MAIN MENU: Displayed when the MENU button is pressed for at least 3 seconds.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-2 SYSTEM SETTING 8-2-1 SYSTEM MODE Items/ Adjustable Data Saved Range REC SIGNAL CAM VIDEO 1394 – C U F E CAMERA MODE 60i 30P 24P 24PA S C U F E V.RES (24/30P) INTRLCE PROG. S C U F E ASPECT – C U F E Switch the operating mode of the camera. 60i: Camera operates in 60i mode. 30P: Camera operates in 30P mode.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-2-2 OPTION MODE 1 Items/ Adjustable Data Saved Range P.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-2-4 REC FUNCTION Items/ Adjustable Data Saved Range INTERVAL REC ON MODE ONE SHOT OFF – – – F – REC TIME 00s01f : 59s29f – C U F – PAUSE TIME – C U F – 00h00m00s01f : 00h04m59s29f : 23h59m59s29f TAKE TOTAL TIME NONE : – C U F – 5day TOTAL REC TIME 00m00s01f : 99m59s29f OVER100min NONE – – – – – AUDIO REC ON OFF Remarks Sets INTERVAL REC function. ON: Uses internal memory to perform interval recording.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-2-5 OUTPUT SEL Items/ Adjustable Data Saved Range VIDEO OUT SEL VBS VF Y SDI 8-2-6 LCD MONITOR Remarks Select the output signal on the VIDEO OUT terminal. VBS: Output a regular composite signal. VF: Output a VF Y signal. The status display is also superimposed. Y: Output a component Y signal. SDI: Output an SDI signal. Only selectable when the optional AJ-YA902AG extension board is attached.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-3 PAINT 8-2-7 GENLOCK Items/ Adjustable Data Saved Range GENLOCK INT EXT 26P EXT – C U F E H PHASE COARSE –50 : +00 8-3-1 ROP Remarks Switch the camera synchronising signal. INT: Synchronise with the internal reference signal regardless of the reference signal input to the GENLOCK IN terminal. EXT: Synchronise with the reference signal input to the GENLOCK IN terminal. 26P EXT: Synchronizes to the signal input via the 26-pin connector.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-3-2 MATRIX 8-3-3 COLOR CORRECTION Items/ Adjustable Data Saved Range MATRIX TABLE Remarks Items/ Adjustable Data Saved Range A B Select the color correction table. 2 types of tables can be stored: type A and type B. R (SAT/PHASE) –31 Adjust the tint. S C U F E +63 S C U F E MATRIX R-G : +00 Perform red color correction (saturation and hue).
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-3-4 LOW SETTING Items/ Adjustable Data Saved Range MASTER GAIN –3dB : 0dB 8-3-5 MID SETTING Remarks Select the master gain from –3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, or 30dB. Items/ Adjustable Data Saved Range MASTER GAIN : 00 Set H.DTL LEVEL. H.DTL LEVEL : 17 14 00 : Set V.DTL LEVEL. V.DTL LEVEL : 24 20 S C U F E 31 Set DTL CORING. DTL CORING : 03 : : 20 : S C U F E 31 LEVEL 0 DEPEND. 1 : 5 S C U F E 0.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-3-6 HIGH SETTING Items/ Adjustable Data Saved Range MASTER GAIN –3dB : 18dB 8-3-7 ADDITIONAL DTL Remarks Select the master gain from –3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, or 30dB. : 00 KNEE APE LVL OFF 1 2 Set H.DTL. : 12 S C U F E 5 CHROMA DTL OFF 1 00 S C U F E Set V.DTL LEVEL. DTL GAIN(+) : Set DTL CORING. S C U F E +31 DTL GAIN(–) –31 : : 08 +00 : : 20 : S C U F E 31 0 LEVEL DEPEND.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-3-8 SKIN TONE DTL Items/ Adjustable Data Saved Range SKIN TONE DTL 8-3-9 KNEE/LEVEL Items/ Adjustable Data Saved Range Remarks ON OFF Set the skin tone DTL to ON or OFF. MASTER PED ON OFF ON/OFF switching for ZEBRA within the SKIN TONE range. 0 Adjust the effect of SKIN TONE DTL CORING. +000 : S C U F E +200 MANUAL KNEE S C U F E SKIN DTL CORING : 5 Set the KNEE POINT position in 0.5% steps.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-3-10 GAMMA Items/ Adjustable Data Saved Range MASTER GAMMA 0.35 8-3-11 FLARE Remarks Set the master gamma in 0.01% steps. 0.45 –15 S C U F E G FLARE Set the Rch gamma. : Set the R FLARE. B FLARE : S C U F E +15 100 000 Set the G FLARE. : S C U F E +00 –15 000 Remarks : S C U F E 0.75 B GAMMA R FLARE : : R GAMMA Items/ Adjustable Data Saved Range 100 000 Set the B FLARE. : Set the Bch gamma.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-4 VF 8-3-12 CAMERA SETTING Items/ Adjustable Data Saved Range DETAIL 8-4-1 VF DISPLAY Items/ Adjustable Data Saved Range Remarks ON OFF Set the DTL (H, V) to ON or OFF. DISP CONDITION ON OFF ON/OFF switching for the two-dimensional LPF that reduces cross-color. DISP MODE ON OFF ON/OFF switching for the HIGH COLOR mode, which enhances the color dynamic range.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-4-2 VF MARKER Items/ Adjustable Data Saved Range TABLE A B – C U F E CENTER MARK OFF 1 2 3 4 – C U F E SAFETY ZONE OFF 1 2 – C U F E SAFETY AREA 80% 8-4-4 VF INDICATOR1 Remarks Items/ Adjustable Data Saved Range Select the VF MARKER setting table. First, select table A or B, then set the items below for each table. EXTENDER Switch the center mark. OFF: Do not display center mark.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-4-5 VF INDICATOR2 Items/ Adjustable Data Saved Range P2CARD REMAIN TOTAL ONE-CARD OFF Select the indication mode for the P2 card’s remaining capacity. TOTAL: Display the total remaining capacity of all P2 cards in slots. ONE-CARD: Display the remaining capacity of the P2 card currently used for recording. OFF: Disable the remaining capacity indication. ON OFF Set the battery voltage indication to ON or OFF.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-5 CAM OPERATION 8-4-7 !LED Items/ Adjustable Data Saved Range GAIN(0dB) 8-5-1 CAMERA ID Remarks ON OFF Select whether or not to illuminate when GAIN is set to other than 0 dB. ID1 ON OFF Select whether or not to illuminate when GAIN is set to other than -3 dB. ID2 ON OFF Select whether or not to illuminate when DS.GAIN (storage gain) is ON. ID3 ON OFF Select whether or not to illuminate when the shutter is set to ON.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-5-3 SHUTTER SELECT Items/ Adjustable Data Saved Range SUPER V MODE 8-5-4 USER SW Remarks FRM1 FRM2 Select the SUPER V switching mode. FRM1: Normal mode. FRM2: After-image reduction mode. The SUPER V mode increases vertical resolution by directly outputting the photodiode vertical signal from the CCD. FRM1 sets the accumulation level to 1/30th second. FRM sets the level to 1/60th second, reducing sensitivity by half.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-5-5 SW MODE Items/ Adjustable Data Saved Range RET SW REC CHECK CAM RET – C U F E S.BLK LVL 8-5-6 WHITE BALANCE MODE Remarks Select the RET switch function. REC CHECK: Perform REC REVIEW. CAM RET: Perform return signal output. OFF –10 –20 – C U F E –30 Set the super black level. AUTO KNEE SW ON OFF Select whether or not to use the AUTO KNEE switch.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-5-7 USER SW GAIN Items/ Adjustable Data Saved Range S.GAIN 30 dB _ • – C U F E 36 dB _ • – C U F E 42 dB _ • – C U F E 48 dB 20 dB (1/6) – C U F E A.IRIS LEVEL Select whether or not to enable 36dB for SUPER GAIN. _: Enable. • : Disable. A.IRIS PEAK/ AVE Select whether or not to enable 42dB for SUPER GAIN. _: Enable. • : Disable. _ • Select whether or not to enable 6 dB (1/30) for DS.GAIN. _: Enable. • : Disable.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-6 MAIN OPERATION 8-6-1 BATTERY/P2CARD Items/ Adjustable Data Saved Range BATTERY SELECT Remarks PRO14 TRIM14 HYTRN50 HYTRN100 HYTRN120 DIONIC90 DIONIC160 HP-90L BP-H120 NP-L50 ENDURA50 ENDURA80 BP-L60/90 NiCd14 NiCd13 NiCd12 TYPE A – C U F – TYPE B Select the battery to use. Remaining capacity detection is also performed according to the selected battery.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-6-2 BATTERY SETTING1 Items/ Adjustable Data Saved Range PRO14 _ • AUTO MANUAL 11.0 : 13.7 : Remarks Enable selection under BATTERY SELECT. _:Enable selection. • :Disable selection. Select auto or manual to set the NEAR END voltage. AUTO: Set voltage automatically. MANUAL: Set voltage manually. When MANUAL is selected in the above menu, set the NEAR END voltage in 0.1 V steps. _ • AUTO MANUAL 11.0 : 13.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-6-3 BATTERY SETTING2 Items/ Adjustable Data Saved Range ENDURA50 _ • AUTO MANUAL 11.0 : 13.1 : Remarks Enable selection under BATTERY SELECT. _:Enable selection. • :Disable selection. Select auto or manual to set the NEAR END voltage. AUTO: Set voltage automatically. MANUAL: Set voltage manually. When MANUAL is selected in the menu above, set the NEAR END voltage in 0.1 V steps. – C U F – 15.0 ENDURA80 _ • AUTO MANUAL 11.0 : 13.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-6-4 MIC/AUDIO1 Items/ Adjustable Data Saved Range FRONT VR CH1 FRONT W.L. REAR ALL OFF – C U F – FRONT VR CH2 FRONT W.L. REAR ALL OFF – C U F – MIC LOWCUT CH1 FRONT REAR W.L. – C U F – OFF MIC LOWCUT CH2 Remarks Select whether or not to enable the FRONT AUDIO LEVEL control for the signal selected as the input signal to AUDIO CH1. FRONT: Only enabled when FRONT is selected. W.L.: Only enabled when WIRELESS is selected.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-6-6 TC/UB Items/ Adjustable Data Saved Range TC MODE DF NDF Set the time code mode. DF: Drop frame. NDF: Non drop frame. Regardless of the setting of this option, the AJ-SPX800P always operates in non-dropframe for 24P and 24PA modes. USER TIME DATE EXT TCG FRM RATE REGEN Select the user bits mode. USER:Select UB value set in the LCD section. TIME: Select local time (hours, minutes, seconds).
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-7 FILE 8-6-7 UMID SET/INFO Items/ Adjustable Data Saved Range COUNTRY NO-INFO 8-7-1 SD CARD READ/WRITE Remarks Input the user’s country. NO-INFO is displayed until the input completes. – C U F – ORGANIZATION NO-INFO – C U F – USER NO-INFO Input the user’s organisation or company name. NO-INFO is displayed until the input completes. Input the user name. NO-INFO is displayed until the input completes.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-8 MAINTENANCE 8-7-3 LENS FILE Items/ Adjustable Data Saved Range FILE NO. 1 : – – – – – 8 READ 8-8-1 SYSTEM CHECK Remarks Select the lens file number. Items/ Adjustable Data Saved Range COLOR CHECK ON OFF Read the lens file data. – – – – – – – – – – WRITE Remarks ON/OFF switching for checking proper operation of the camera-recorder.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-8-5 DIAGNOSTIC1 Items/ Adjustable Data Saved Range CAMSOFT(IN) 8-8-6 DIAGNOSTIC2 Remarks Display the software version for the microprocessor-controlled flash. SYSCON SOFT Display the software version for the external flash. LCD SOFT Display the table version. P2CS OS Display the character font version. P2CS AP Display the program version for the FPGA (Field Programmable Gate Array) that processes camera block signals.
#, 52: 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ 8-9 OPTION MENU 8-9-1 OPTION Items/ Adjustable Data Saved Range ENG SECURITY ON OFF Select whether or not to prohibit opening the menu screen. ON: Menu screen cannot be opened. Please consult your nearest service center to release the setting. OFF: Menu screen can be opened. ON OFF Select whether or not to enable the 1/2 shutter when the shutter is set to OFF while operating in the progressive mode. ON: Enable 1/2 shutter.
