Panasonic Broadcast AJ-SPD850p Menu Information
Setup (Initial settings) The memory card recorder’s main settings are performed while making selections using a system of menus. If a TV monitor has been connected to the VIDEO OUT 3 connector or SDI OUT 3 connector (optional) on the rear panel and the SUPER switch is set to [ON], the setting menus are displayed on the TV monitor. SUPER switch (set to [ON]) (1) (3) 1 DVCPRO 50 ON POWER USB 2.
Setup menus The memory card recorder can hold five user files, each of which has its own specific menu settings, and one of these files can be selected for use.
Setup menus (continued) Loading user files Saving user files The contents of the USER2, USER3, USER4 or USER5 file can be copied (loaded) into the USER1 file. Also, the contents of the USER1 file can be copied (saved) into the USER2, USER3, USER4 or USER5 file.
Setup menus (continued) SYSTEM menu No./Item 11 Description Coarse adjustment of system phase: 90 ° units SYS SC COAR. 0000 0 0001 90 0002 180 0003 270 12 SYS SC FINE Note: If setting operation is performed, the setting value does not return to factory (default) setting.
Setup menus (continued) SYSTEM menu No./Item 30 USER menu Description This adjusts the brightness of the LCD monitor on the front panel. 000 P-ROLL TIME BRIGHT 0000 –7 : : 0007 0 : : 0014 7 Note: If setting operation is performed, the setting value does not return to factory (default) setting. 31 No./Item 001 LOCAL ENA CONTRAST 40 MENU LOCK This selects whether the system file lock mode is to be engaged or released. 0000 OFF : The lock is released (file data can be changed).
Setup menus (continued) USER menu No./Item 008 DISPLAY SEL Description This selects what information is to be provided by the time code and other superimposed displays output from the VIDEO OUT 3/SDI OUT 3 connector (optional). 0000 TIME : Data only. (The data indicates the value for whichever of CTL, TC or UB currently selected by the COUNTER button.) 0001 T&STA : Data and operation status. 0002 T&S&M : Data, operation status and mode.
Setup menus (continued) USER menu No./Item 012 Description This sets the memory card recorder’s recording and playback format. SYS FORMAT 50M : 0000 DVCPRO50 (50 Mbps) is selected. 0001 25M : DVCPRO (25 Mbps) is selected. 0002 DV : DV (25 Mbps) is selected. Note: The format complies with the setting of this menu item when the card is ejected. 017 CHARA SIZE No./Item 069 Sets the internal clock time.
Setup menus (continued) USER menu No./Item Description Sets the time difference from the world standard time. 05 TIME ZONE 0000 0001 0002 00:00 +00:30 +01:00 : : 0050 –00:30 Refer to the table below, and select the setting which corresponds to the local time.
Setup menus (continued) USER menu No./Item 100 Description This selects the direct search dial operation. SEARCH ENA This sets the maximum speed for shuttle operations. SHTL MAX 0000 x8 : 0001 x16 : 0002 x32 : 0003 x60 : 0004 x100 : 102 8x normal speed 16x normal speed 32x normal speed 60x normal speed 100x normal speed This sets the maximum speed for FF and REW operations. FF.
Setup menus (continued) USER menu No./Item 106 Description This selects the EE mode output signals. 0000 NORMAL : Signals are output with a delay equivalent to the length of internal signal processing. 0001 THRU : Signals are output directly, without internal processing, and so are output with no delay. Note: When 1394 has been selected for the video input signals or when INT SG has been selected for video or audio, internal operations are forcibly set to NORMAL.
Setup menus (continued) USER menu No./Item 201 9P SEL Description This selects whether the REMOTE (9P) connector functions when the REMOTE button is lit. No./Item 208 PARITY This sets the ID information to be returned to the controller. ID SEL 0000 OTHER 0001 DVCPRO 0002 ORIG Notes: • ID information of any VTR except for the DVCPRO’s is set in OTHER. • Select ORIG only when the unit has been connected to the specified controller.
Setup menus (continued) USER menu No./Item 303 STD/NON-STD Description This selects STD or NON-STD in accordance with the composite input signal. 0000 AUTO : Standard/non-standard signals are automatically identified and processed. 0001 STD : Standard signals are processed. (Forced STD) 0002 N-STD : Non-standard signals are processed. (Forced NON-STD) Notes: • Use the non-standard (NON-STD) setting when video or audio trouble occurs with signals from laser discs or a satellite.
Setup menus (continued) USER menu
Setup menus (continued) USER menu
Setup menus (continued) USER menu
Setup menus (continued) USER menu
Setup menus (continued) USER menu
Setup menus (continued) USER menu
Setup menus (continued) USER menu No./Item 755 25M REC CH 800 No./Item Description Used to select the number of AUDIO channels for DVCPRO (25 Mbps) or DV (25 Mbps) recording. Sub-screen 0000 2CH: Records on two channels. 0001 4CH : Records on four channels. Note: Four-channel recording is always used with DVCPRO50 (50 Mbps). REC LINE1 00 ADD LINE 25 The underlined items indicates the initial setting. 58 This selects the additional line where the signals are to be recorded.
Setup menus (continued) USER menu No./Item 801 Description This selects the mode for recording signals on additional lines. ADD LINE 50 No./Item 02 [525i system] [625i system] 0000 10L 0000 7L : : : : 0003 13L 0003 10L : : : : 0012 22L 0015 22L 0013 263L 0016 320L : : : : 0025 284L 0032 623L 0026 525L Note: This menu option is not displayed when setting “1” has been selected as the additional line mode.
Setup menus (continued) USER menu No./Item 803 TELETEXT DET Description This selects the method used to detect the lines in which the teletext signals are to be recorded. 0000 OFF : The teletext signals are not recorded. 0001 AUTO : The teletext signals are automatically detected and recorded. 0002 MANU : The lines in which the teletext signals are to be recorded are selected and set.
Setup menus (continued) USER menu Number of lines which can be set for TELETEXT No./Item • When 25 Mbps is the recording/playback format. No. 800: ADD LINE 25 setting value OFF YC422 YC411 Y1_B/W Y1_BPF C1 Y2_B/W Y2_BPF C2 Number of lines which can be set [525i system] [625i system] 660: 660: UMID REC setting value UMID REC setting value OFF OFF ON ON 13 10 14 12 5 4 7 5 8 5 10 8 13 10 14 12 5 4 7 5 900 Sets LCD protect mode.
Setup menus (continued) USER menu
