Operating Instructions
Table Of Contents
- Read this first!
- Contents
- Chapter 1 Introduction
- Chapter 2 Parts and their Functions
- 2-1 Power Supply and Accessory Mounting Section
- 2-2 Audio (input) Function Section
- 2-3 Audio (output) Function Section
- 2-4 Shooting and Recording/Playback Functions Section
- 2-5 Menu Operation Section
- 2-6 Time Code Section
- 2-7 Warning and Status Display Functions
- 2-8 Display Window Functions
- 2-9 LCD Monitor
- 2-10 Viewfinder
- Chapter 3 Recording and Playback
- Chapter 4 Adjustments and Settings for Recording
- 4-1 Adjusting the White balance and Black Balance
- 4-2 Setting the Electronic Shutter
- 4-3 Selecting Recording Signals and Recording System
- 4-4 Selecting Audio Input Signals and Adjusting Recording Levels
- 4-5 Setting Time Data
- 4-5-1 Setting the User Bits
- 4-5-2 Setting the Internal Clock’s Date and Time
- 4-5-3 Setting the Time Code
- 4-5-4 Externally Locking the Time Code
- 4-5-5 Providing an ID to the Camera
- 4-5-6 Setting UMID Information
- 4-5-7 CTL Count Setting and Display
- 4-5-8 Mode Check Screen Displays (MODE CHECK button function)
- 4-6 Menu Displays in the Viewfinder Screen
- 4-7 Viewfinder Screen Status Displays
- 4-7-1 Lamps in the Viewfinder Screen
- 4-7-2 Viewfinder Status Indication Layout
- 4-7-3 Selecting Viewfinder Display Information
- 4-7-4 Display Modes and Setting Changes/adjustment Result Messages
- 4-7-5 Setting the Marker Displays
- 4-7-6 Marker Check Screen Displays (MARKER SELECT button function)
- 4-7-7 Checking Return Video Signal in the Viewfinder
- 4-8 Adjusting and setting the LCD monitor
- 4-9 Menu-driven Function Setup
- 4-10 Handling data
- Chapter 5 Preparation
- 5-1 Power Supply
- 5-2 Mounting the Viewfinder and Adjusting its Position
- 5-3 Mounting the lens and Performing the Flange Back and White Shading Adjustments
- 5-4 Preparing for Audio Input
- 5-5 Connection between the USB 2.0 port of the AJ-SPC700P and a PC
- 5-6 Mounting the Camera on a Tripod
- 5-7 Attaching the Shoulder Strap
- 5-8 Attaching the Rain Cover
- 5-9 Connecting the AJ-EC3P Extension Controller
- 5-10 Attaching the Front Audio Level Control Knob
- Chapter 6 Manipulating Clips with Thumbnails
- 6-1 Thumbnail Manipulations Overview
- 6-2 Thumbnail Screen
- 6-3 Selecting Thumbnails
- 6-4 Playing Back Clips
- 6-5 Switching the Thumbnail Display
- 6-6 Shot Mark
- 6-7 Voice Memo
- 6-8 Deleting Clips
- 6-9 Restoring Clips
- 6-10 Reconnection of Incomplete Clips
- 6-11 Copying Clips
- 6-12 Setting of Clip Meta Data
- 6-13 Setting of Proxy (optional)
- 6-14 Formatting a P2 Card
- 6-15 Formatting SD memory cards
- 6-16 Setting the Thumbnail Display Mode
- 6-17 Properties
- Chapter 7 Maintenance and Inspections
- Chapter 8 Menu Description Tables
- Chapter 9 Specifications
2
Read this first!
indicates safety information.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s en-
closure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral tri-
angle is intended to alert the user to the pres-
ence of important operating and maintenance
(service) instructions in the literature accom-
panying the appliance.
WARNING:
zTO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
zTO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, KEEP THIS EQUIPMENT AWAY
FROM ALL LIQUIDS. USE AND STORE ONLY
IN LOCATIONS WHICH ARE NOT EXPOSED
TO THE RISK OF DRIPPING OR SPLASHING
LIQUIDS, AND DO NOT PLACE ANY LIQUID
CONTAINERS ON TOP OF THE EQUIPMENT.
CAUTIONS:
TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD AND ANNOYING INTERFERENCE,
USE THE RECOMMENDED ACCESSORIES
ONLY.
CAUTIONS:
TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, REFER MOUNTING OF OPTIONAL
INTERFACE BOARDS TO QUALIFIED SERVICE
PERSONNEL.
FCC Note:
This equipment has been tested and found to comply
with the limits for a class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy, and if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
Warning:
To assure continued FCC emission limit compliance, the
user must use only shielded interface cables when
connecting to external units. Also, any unauthorized
changes or modifications to this equipment could void
the user’s authority to operate it.
Notice (U.S.A. only):
This product has a fluorescent lamp that
contains a small amount of mercury. It also
contains lead in some components. Disposal
of these materials may be regulated in your
community due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities, or the Electronics Industries
Alliance:
<http://www.eiae.org.>
A rechargeable battery that is recyclable powers the product you have purchased.
Caution regarding laser beams
The CCD may be damaged if it is subjected to light from a laser beam.
When using the camera-recorder in locations where laser irradiation equipment is used, be careful not to allow
the laser beam to shine directly on the lens.
#,52%2'PINKUJDQQMࡍࠫ㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣޓᧁᦐᣣޓඦ೨㧥ᤨ㧠㧡ಽ