Panasonic Broadcast AJ-SPC700p Menu Information
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) 8-2 SYSTEM SETTING 8-2-1 SYSTEM MODE Items/ Adjustable Data Saved Range REC SIGNAL CAM VIDEO 1394 – C U F E ASPECT Select the aspect ratio for recording. 16:9: Record in <16:9> aspect ratio. 4:3: Record in <4:3> aspect ratio. 50M 25M DV Select the recording mode. 50M: Record in DVCPRO50 format. 25M: Record in DVCPRO format. DV: Record in DV format. 0% 7.5%A Switch the setup.
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) 8-2-3 REC FUNCTION Items/ Adjustable Data Saved Range PRE REC MODE ON OFF – C U F – PRE REC TIME 1SEC : 8SEC : 15SEC – C U F – LOOP REC MODE ON OFF – – – F – VOICE MEMO RESERV ON OFF – C U F – REC START ALL NORMAL – C U F – P.ON REC SLOT SEL – C U F – 100 HOLD SLOT1 8-2-4 OUTPUT SEL Remarks Items/ Adjustable Data Saved Range Select whether or not to enable PRE RECORDING.
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) 8-2-5 LCD MONITOR Items/ Adjustable Data Saved Range BRIGHTNESS –7 8-2-6 GENLOCK Remarks Adjust the LCD monitor brightness. Items/ Adjustable Data Saved Range GENLOCK : +0 INT EXT : – C U F – +7 COLOR LEVEL –7 Adjust the LCD monitor chroma level. : +0 : – C U F E – C U F – +7 CONTRAST –7 Adjust the LCD monitor contrast.
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) 8-3 PAINT 8-3-1 ROP Items/ Adjustable Data Saved Range MASTER PED –200 8-3-2 MATRIX Remarks Set the master pedestal level. : +005 –31 MATRIX TABLE MATRIX R-G Set the H Detail and V Detail levels. S C U F E +31 0.35 +06 Set MASTER GAMMA in 0.01 steps. : : 0 +06 : S C U F E +31 MATRIX G-B –31 S C U F E 107.
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) 8-3-3 COLOR CORRECTION Items/ Adjustable Data Saved Range R (SAT/PHASE) –63 : +00 Remarks Perform red color correction (saturation and hue). 8-3-4 LOW SETTING Items/ Adjustable Data Saved Range MASTER GAIN : –63 : +00 Perform color correction (saturation and hue) between red and magenta. H.DTL LEVEL : +00 17 : Perform magenta color correction (saturation and hue). V.
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) 8-3-5 MID SETTING Items/ Adjustable Data Saved Range MASTER GAIN –3dB : 9dB 8-3-6 HIGH SETTING Remarks Select the master gain from –3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, or 30dB. Items/ Adjustable Data Saved Range MASTER GAIN : 00 Set H.DTL LEVEL. H.DTL LEVEL : 14 12 00 : Set V.DTL LEVEL. V.DTL LEVEL : 15 14 S C U F E 31 Set DTL CORING.
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) 8-3-7 ADDITIONAL DTL Items/ Adjustable Data Saved Range KNEE APE LVL OFF 1 2 8-3-8 SKIN TONE DTL Remarks Set KNEE APE LEVEL. : S C U F E DTL GAIN(+) 5 –31 : +00 Set the chroma detail. Detects the chroma edge and superimposes it on Y to enhance H.DTL. A greater value increases the correction. Adjust the detail level toward + (upwards).
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) 8-3-9 KNEE/LEVEL Items/ Adjustable Data Saved Range MASTER PED –200 8-3-10 GAMMA Remarks Set the master pedestal. : +005 Items/ Adjustable Data Saved Range MASTER GAMMA : ON OFF S C U F E KNEE POINT 70.0% : 85.0% Set the mode when the AUTO KNEE switch is OFF. The KNEE POINT/ SLOPE set value is enabled when this setting is ON. Set the KNEE POINT position in 0.5% steps.
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) 8-4 VF 8-3-12 CAMERA SETTING Items/ Adjustable Data Saved Range DETAIL 8-4-1 VF DISPLAY Adjustable Items/ Data Saved Range Remarks ON OFF Set the DTL (H, V) to ON or OFF. ON OFF ON/OFF switching for the twodimensional LPF that reduces crosscolor. ON OFF ON/OFF switching for the HIGH COLOR mode, which enhances the color dynamic range. ON OFF Set the gamma circuit to ON or OFF.
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) 8-4-2 VF MARKER Items/ Adjustable Data Saved Range TABLE A B – C U F E CENTER MARK OFF 1 2 3 4 – C U F E SAFETY ZONE OFF 1 2 – C U F E SAFETY AREA 80% 8-4-4 VF INDICATOR1 Remarks Select the VF MARKER setting table. First, select table A or B, then set the items below for each table. EXTENDER Switch the center mark. OFF: Do not display center mark.
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) 8-4-5 VF INDICATOR2 Items/ Adjustable Data Saved Range P2CARD REMAIN OFF ONE-CARD TOTAL – C U F E BATTERY ON OFF Remarks Select the indication mode for the P2 card’s remaining capacity. OFF: Disable the remaining capacity indication. ONE-CARD: Display the remaining capacity of the P2 card currently used for recording. TOTAL: Display the total remaining capacity of all P2 cards in slots.
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) 8-5 CAM OPERATION 8-4-7 !LED Items/ Adjustable Data Saved Range GAIN(0dB) 8-5-1 CAMERA ID Remarks ON OFF Select whether or not to illuminate when GAIN is set to other than 0 dB. ID1 ON OFF Select whether or not to illuminate when GAIN is set to other than –3 dB. ID2 ON OFF Select whether or not to illuminate when the shutter is set to ON.
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) 8-5-3 SHUTTER SELECT Items/ Adjustable Data Saved Range SUPER V MODE FRM1 FRM2 8-5-4 USER SW Remarks POSITION1 SEL Select the SUPER V switching mode. FRM1: Normal mode. FRM2: After-image reduction mode. The SUPER V mode increases vertical resolution by directly outputting the photo-diode vertical signal from the CCD. FRM1 sets the accumulation level to 1/30th second.
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) 8-5-5 SW MODE Items/ Adjustable Data Saved Range RET SW REC CHECK CAM RET 8-5-6 WHITE BALANCE MODE Remarks – C U F E Select the RET switch function. REC CHECK: Perform REC REVIEW. CAM RET: Perform return signal output. S.BLK LVL OFF –10 –20 – C U F E –30 Set the super black level. AUTO KNEE SW ON OFF Select whether or not to use the AUTO KNEE switch.
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) 8-6 MAIN OPERATION 8-5-7 USER SW GAIN Items/ Adjustable Data Saved Range S.GAIN 30 dB Remarks _ • Select whether or not to enable 30dB for SUPER GAIN. _: Enable. • : Disable. _ • Select whether or not to enable 36dB for SUPER GAIN. _: Enable. • : Disable. – C U F E 36 dB 8-6-1 BATTERY/P2CARD – C U F E 8-5-8 IRIS Items/ Adjustable Data Saved Range A.
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) 8-6-2 BATTERY SETTING1 Items/ Adjustable Data Saved Range CARD NEAR END ALARM ON OFF Select whether or not to set the alarm to beep for P2 CARD NEAR END ALARM. 2min 3min Set the remaining time to indicate the P2 CARD NEAR END TIME alarm. ON OFF Select whether or not to set the alarm to beep for P2 CARD END ALARM.
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) Items/ Adjustable Data Saved Range DIONIC90 _ • MANUAL AUTO 11.0 : 13.6 : Remarks Enable selection under BATTERY SELECT. _:Enable selection. • :Disable selection. Select auto or manual to set the NEAR END voltage. MANUAL: Set voltage manually. AUTO: Set voltage automatically. When MANUAL is selected in the menu above, set the NEAR END voltage in 0.1 V steps. – C U F – 15.
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) 8-6-3 BATTERY SETTING2 Items/ Adjustable Data Saved Range NiCd14 _ • NEAR END 11.0 : 13.6 Remarks Enable selection under BATTERY SELECT. _:Enable selection. • :Disable selection. Set the NEAR END voltage in 0.1 V steps. 8-6-4 MIC/AUDIO1 Items/ Adjustable Data Saved Range FRONT VR CH1 OFF FRONT W.L. REAR ALL : END 15.0 11.0 : 13.2 : – C U F – 15.0 NiCd13 _ • NEAR END 11.0 : 12.
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) 8-6-5 MIC/AUDIO2 Items/ Adjustable Data Saved Range FRONT MIC POWER 8-6-6 TC/UB Remarks Items/ Adjustable Data Saved Range ON OFF Select the phantom power supply for the front microphone. TC MODE ON OFF Select the phantom power supply for the rear microphone. UB MODE ON OFF Set the audio output circuit. OFF: Power-down output circuit to disable output. ON: Enable output.
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) 8-7 FILE 8-7-1 SD CARD READ/WRITE Items/ Adjustable Data Saved Range FIRST REC TC PRESET REGEN – C U F – P.
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) 8-7-2 SD CARD R/W SELECT Items/ Adjustable Data Saved Range ID READ/ WRITE Remarks ON OFF Select whether or not to include the CAMERA ID when reading out or writing to the SD memory card. ON OFF Select whether or not to include the FILE MENU settings when reading out or writing to the SD memory card.
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) 8-8 MAINTENANCE 8-8-5 DIAGNOSTIC1 8-8-1 SYSTEM CHECK Items/ Adjustable Data Saved Range COLOR CHECK ON OFF – – – – – Remarks ON/OFF switching for checking proper operation of the camera-recorder. Displays the center Y and RGB levels on the viewfinder to indicate whether the signals have been properly processed and transmitted from the optical system to the digital system.
#, 52% 2 'PINKUJ DQQM ࡍࠫ 㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣᦐᧁޓᣣޓඦ೨㧥ᤨ㧠㧡ಽ Chapter 8 Menu Description Tables (continued) 8-9 OPTION MENU 8-8-6 DIAGNOSTIC2 Items/ Adjustable Data Saved Range SYSCON SOFT 8-9-1 OPTION Remarks Display the software version for the system control microprocessor. Items/ Adjustable Data Saved Range ENG SECURITY ON OFF Select whether or not to prohibit opening the menu screen. ON: Menu screen cannot be opened. Please consult your distributor to release the setting.
