Panasonic Broadcast AJ-SD93 Menu Information
Setup (initial settings) The unit’s main settings are performed while making selections using a menu-driven system. When a TV monitor is connected to the VIDEO MON connector on the unit’s rear panel, the setup menus will appear on the TV monitor.
Setup menus This VTR can hold five user files, each of which has its own specific menu settings, and one of these files can be selected for use. Changing the file Setting and releasing the lock mode The lock mode can be set to protect the system file and user file (USER2 to USER5) settings. Once the lock mode is set, no further changes can be made to the settings. Setting and releasing the lock mode can be set for the system file by using setup menu No.
Setup menus (continued) Loading user files Saving user files The contents of the USER2, USER3, USER4 or USER5 file can be copied (loaded) into the USER1 file. Also, the contents of the USER1 file can be copied (saved) into the USER2, USER3, USER4 or USER5 file. Load/save USER 1 USER 2 Load/save Lock mode can be set (1) Press the MENU button. (2) Press the REW button or FF button while holding down the PF button to select the USER1 file.
Setup menus (continued) SYSTEM menu No./Item 11 SYS SC YA93P 13 Description No./Item System phase adjustment: Variable range ±180 ° –: Advanced, +: Delayed 0000 –128 : : 0128 0 : : 0255 127 18 System phase adjustment. SYS H OFFSET 0000 –3 : –13.4 µsec 0001 –2 : –8.96 µsec 0002 –1 : –4.52 µsec 0003 0 : 0 sec 0004 1 : +4.52 µsec 0005 2 : +8.96 µsec 0006 3 : +13.4 µsec Note: If setting operation is performed, the setting value does not return to factory (default) setting.
Setup menus (continued) USER menu No./Item 001 LOCAL ENA Description No./Item This selects the buttons which can be operated on the front panel when the CONTROL switch has been set to REMOTE. 008 DISPLAY SEL 0000 DIS : No buttons can be operated. 0001 ST&EJ : Only the STOP and EJECT buttons can be operated. 0002 ENA : All buttons can be operated. 002 This selects the 12 or 24 hour display for the CTL counter.
Setup menus (continued) USER menu No./Item No./Item Description 009 This sets the position of the characters on the horizontal plane for the time CHARA H-POS code and other super displays output to the VIDEO MON connector. 0000 0 : : 0004 4 : : 0016 16 Note: Press the joystick, then you can set the position of the characters by inclining it up or down or to the left or right. 012 0000 50M : DVCPRO50 (50 Mbps) is selected. 0001 25M : DVCPRO (25 Mbps) is selected.
Setup menus (continued) USER menu No./Item 100 Description No./Item This sets the method used to transfer to the search mode (stick operation). SEARCH ENA 109 AUTO REW 0000 STICK : Operation transfers to the search mode when the SEARCH button is pressed or the stick is operated. 0001 KEY : Operation is not transferred to the search mode unless the SEARCH button is pressed. 101 This sets the maximum speed for shuttle 111 102 FRZ MODE SEL x8.4 : 8.
Setup menus (continued) USER menu No./Item 114 Description No./Item This selects whether to cause the REC INH lamp to flash or light up when the cassette has been set to the accidental erasure prevention status. REC INH LAMP 160 This sets the repeat play mode. MEMORY MODE 0000 OFF : No repeat play (normal operation) 0001 M-STOP : The tape stops near the BEGIN point when a FF or REW operation has been performed.
Setup menus (continued) USER menu No./Item 400 STILL TIMER Description No./Item This selects the time to be taken until the unit goes into the tape protection mode when it is left standing in the stop or search still (JOG/SLOW/SHTL) mode. (Unit: s = second, min = minute) 403 STOP PROTECT 0000 0.5s 0001 5s 0002 10s 0003 20s 0004 30s 0005 40s 0006 50s 0007 1min 0008 2min Notes: • STEP FWD and HALF LOADING are provided in the tape protection mode.
Setup menus (continued) USER menu
Setup menus (continued) USER menu
Setup menus (continued) USER menu
Setup menus (continued) USER menu
Setup menus (continued) USER menu
Setup menus (continued) USER menu
Setup menus (continued) USER menu No./Item 802 TELETEXT SEL (For AJ-SD93P) YA93P YA94G 803 TELETEXT DET YA93P YA94G Description No./Item For selecting the type of teletext signals to be recorded. 0000 MOJI : MOJI system 0001 NABTS : NABTS system Note: Signals like VITC signals are often mistakenly detected as teletext signals when the NABTS system has been selected. If this happens, select MANU as the setting for setup menu No. 803 (TELETEXT DET), then select the line for teletext signals.
Setup menus (continued) USER menu No./Item 880 Description No./Item This sets the transfer rate of the IEEE 1394 digital interface output. DIF AUD IN DIF SPEED 0000 0001 0002 881 889 S100 : 100 Mbps S200 : 200 Mbps S400 : 400 Mbps (For AJ-SD93P) 882 0000 DVCPRO : The signals are forcibly output in the DVCPRO format. 0001 DV : The signals are forcibly output in the DV format. 0002 AUTO : During playback, the playback tape format takes priority. During EE, the setting in setup menu No.
Setup menus (continued) USER menu
