Menu Information

ManualsBrandsPanasonic ManualsMP3 PlayerAJ-SD255

Panasonic Broadcast

AJ-SD255

Menu Information

Summary of content (19 pages)

PAGE 1
Panasonic Broadcast AJ-SD255 Menu Information
PAGE 2
Setup (initial settings) The unit’s main settings are performed while making selections using a menu-driven system. When a TV monitor is connected to the VIDEO MON connector on the unit’s rear panel, the setup menus will appear on the TV monitor.
PAGE 3
Setup menus This VTR can hold five user files, each of which has its own specific menu settings, and one of these files can be selected for use. Changing the file Setting and releasing the lock mode (1) Press the MENU button. (2) When the FF button is pressed while holding down the PF button, the next user file is selected; conversely, when the REW button is pressed while holding down the PF button, the previous user file is selected.
PAGE 4
Setup menus (continued) Loading user files Saving user files The contents of the USER2, USER3, USER4 or USER5 file can be copied (loaded) into the USER1 file. Also, the contents of the USER1 file can be copied (saved) into the USER2, USER3, USER4 or USER5 file. USER 1 Load/save Load/save USER 2 Lock mode can be set (1) Press the MENU button. (2) Press the REW button or FF button while holding down the PF button to select the USER1 file.
PAGE 5
Setup menus (continued) SYSTEM menu No./Item 11 SYS SC Description System phase adjustment: Variable range ±180 ° –: Advanced, +: Delayed 0000 –128 : : 0128 0 : : 0255 127 13 No./Item 18 System phase adjustment. SYS H OFFSET 0000 –3 : –13.4 µsec 0001 –2 : –8.96 µsec 0002 –1 : –4.52 µsec 0003 0 : 0 sec 0004 1 : +4.52 µsec 0005 2 : +8.96 µsec 0006 3 : +13.4 µsec Note: If setting operation is performed, the setting value does not return to factory (default) setting. 22 This sets the video level. Max.
PAGE 6
Setup menus (continued) USER menu No./Item 001 LOCAL ENA Description This selects the buttons which can be operated on the front panel when the CONTROL switch has been set to REMOTE. 0000 DIS : No buttons can be operated. 0001 ST&EJ : Only the STOP and EJECT buttons can be operated. 0002 ENA : All buttons can be operated. 002 This selects the 12 or 24 hour display for the CTL counter.
PAGE 7
Setup menus (continued) USER menu No./Item No./Item Description 009 This sets the position of the characters on the horizontal plane for CHARA H-POS the time code and other super displays output to the VIDEO MON connector. 0000 0 : : 0004 4 : : 0016 16 Note: Press the joystick, then you can set the position of the characters by inclining it up or down or to the left or right.
PAGE 8
Setup menus (continued) USER menu No./Item 100 Description No./Item This sets the method used to transfer to the search mode (stick operation). SEARCH ENA 109 AUTO REW 0000 STICK : Operation transfers to the search mode when the SEARCH button is pressed or the stick is operated. 0001 KEY : Operation is not transferred to the search mode unless the SEARCH button is pressed. 101 This sets the maximum speed for shuttle 102 x8.4 : 8.
PAGE 9
Setup menus (continued) USER menu No./Item 114 REC INH LAMP Description This selects whether to cause the REC INH lamp to flash or light up when the cassette has been set to the accidental erasure prevention status. No./Item 160 This sets the repeat play mode. MEMORY MODE 0000 OFF : No repeat play (normal operation) 0001 M-STOP : The tape stops near the BEGIN point when a FF or REW operation has been performed.
PAGE 10
Setup menus (continued) USER menu No./Item 400 STILL TIMER Description This menu item is for selecting the time to elapse before the tape protection mode is established when a DVCPRO tape is used. It is also for selecting the time to elapse before the tape protection mode is established when the VTR has been left standing in the STOP or search STILL (JOG, SLOW or SHTL) mode. (Unit: s = second, min = minute) 0000 0.
PAGE 11
Setup menus (continued) USER menu No./Item 500 VITC BLANK Description No./Item For selecting whether to output the VITC signal at the positions selected by setup menu items No. 501 (VITC POS-1) and No. 502 (VITC POS-2). 505 EXT TC SEL This sets the position where the VITC signal is to be inserted.
PAGE 12
Setup menus (continued) USER menu No./Item 510 TC OUT REF Description This is used to switch the phase of the time code, which is output from the TIME CODE OUT connector, for the external LTC input when the TCG switch is at the EXT position. 0000 V OUT : Time code is synchronized with output video signal. 0001 TC_IN : Time code is synchronized with external time code input. 511 VITC OUT This selects how the VITC which is to be superimposed onto the output video signal is to be output.
PAGE 13
Setup menus (continued) USER menu
PAGE 14
Setup menus (continued) USER menu
PAGE 15
Setup menus (continued) USER menu
PAGE 16
Setup menus (continued) USER menu
PAGE 17
Setup menus (continued) USER menu No./Item 802 TELETEXT SEL (For AJ-SD255P) 803 TELETEXT DET Description No./Item For selecting the type of teletext signals to be recorded. 804 BLANK LINE 0000 MOJI : MOJI system 0001 NABTS : NABTS system Note: Signals like VITC signals are often mistakenly detected as teletext signals when the NABTS system has been selected. If this happens, select MANU as the setting for setup menu No. 803 (TELETEXT DET), then select the line for teletext signals.
PAGE 18
Setup menus (continued) USER menu No./Item 880 Description This sets the transfer rate of the IEEE1394 digital interface output. 881 889 DIF AUD IN DIF SPEED YAD255G No./Item 0000 0001 0002 S100 : 100 Mbps S200 : 200 Mbps S400 : 400 Mbps (For AJ-SD255P) This sets the format when the IEEE1394 digital signals are output. DIF TYPE (For AJ-SD255P) YAD255G 882 0000 DVCPRO : The signals are forcibly output in the DVCPRO format. 0001 DV : The signals are forcibly output in the DV format.
PAGE 19
Setup menus (continued) USER menu
No./Item A00 Description This selects the user file whose contents will be loaded into USER1. LOAD No./Item A02 P. ON LOAD 0000 USER2 : The USER2 file contents are loaded. 0001 USER3 : The USER3 file contents are loaded. 0002 USER4 : The USER4 file contents are loaded. 0003 USER5 : The USER5 file contents are loaded. Note: Pressing the MENU button after loading displays a confirmation screen. Pressing the PLAY button stores the setting values.