ENGLISH AJAJ- Operating Instructions FRANÇAIS 2˝ Electronic HD View Finder
WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. Operating precaution Operation near any appliance which generates strong magnetic fields may give rise to noise in the video and audio signals. If this should be the case, deal with the situation by, for instance, moving the source of the magnetic fields away from the unit before operation. FCC Note: This device complies with Part 15 of the FCC Rules.
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E– 3 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E– 3 Parts and Their Functions Adjusting the Viewfinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E– 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Features OThe high-resolution CRT delivers superb picture sharpness, making focusing easier. OThe low-flare CRT makes the screen clear and easy on the eyes. OThe large eyepiece aperture makes it possible to see the screen even when holding the viewfinder at some distance from your eye. OThe eyepiece is easily detachable. OEasy, one-touch left-right and forward-backward position adjustment. Specifications Power supply: DC 12 V (supplied by camera) Power consumption: 3.3 W (AJ-HVF20P) 3.
ENGLISH Parts and Their Functions ON OFF 1 ZEBRA (Zebra Pattern) Switch Displays a zebra pattern inside the viewfinder. ON: Displays a zebra pattern. OFF: No zebra pattern displayed. The details of the display, such as the type of zebra pattern, will differ depending on the camera used with the viewfinder. Refer to the instruction manual of the camera for details. 2 TALLY Switch Controls the front tally lamp. HIGH: Makes the front tally lamp brighter. OFF: Turns the front tally lamp off.
Parts and Their Functions 5 BRIGHT (Brightness) Knob Adjusts the brightness of the screen inside the viewfinder. The setting of this control has no effect on the output signal of the camera. 6 Front Tally Lamp Lights when the VTR is recording and the TALLY switch is set to HIGH or LOW. Also, flashes on and off as a warning indication, in the same manner as the REC lamp, inside the viewfinder. The brightness of the front tally lamp is controlled by the setting of the TALLY switch (HIGH or LOW).
Internal LEDs The lamp and picture tube indications will differ depending on the camera used with the viewfinder. Refer to the instruction manual of the camera for details.
Adjusting the Viewfinder Adjusting the Mounting Height of the Viewfinder The mounting height of the viewfinder can be adjusted using the method described below. Adjust the height of the mounting unit as required. O At the time of shipping, the mounting height is set for use with the AJ-HDC20A and AJ-HDC27A models. OAdjusting the height of the mounting unit 1. Detach the two screws, the detach the mounting unit. Mounting unit Screws 2.
Mounting the Viewfinder 1. Confirm that the POWER switch of the camera is “OFF”. 2. Insert the plug into the connection jack of the viewfinder. Be sure to insert the plug all the way into the connection jack. 3. Push the viewfinder down into place. 4. Tighten the stopper screw firmly. Stopper screw Detaching the Viewfinder 1. Confirm that the POWER switch of the camera is “OFF”. 2. Loosen the stopper screw and detach the viewfinder by pulling it straight up.
Adjusting the Viewfinder Position Adjustment 1. Lift up the viewfinder forward-backward/left-right position clamp lever to disengage the lock. Lever Viewfinder 2. Loosen the viewfinder forward-backward/left-right position clamp lever. 3. Adjust the position of the viewfinder by moving it forward, backward, left or right. 4. Return the viewfinder forward-backward/left-right position clamp lever to the locked position.
Diopter Adjustment 1. Set the POWER switch of the camera to “ON”. A picture will appear in the viewfinder. 2. Turn the diopter adjustment ring to adjust the diopter so that the viewfinder picture can be clearly seen. Diopter Adjustment Ring Screen Adjustment Adjust the condition of the viewfinder screen. Brightness: Adjust the BRIGHT control. Contrast: Adjust the CONTRAST control. Contour: Adjust the PEAKING control. PEAKING CONTRAST BRIGHT PEAKING control CONTRAST control BRIGHT control 1.
Adjusting the Viewfinder Detaching the Eyepiece If dust has adhered to the CRT screen or mirror, detach the eyepiece and remove it. Do not wipe the mirror surface under any circumstances as it has been specially treated. Dust which has adhered to the mirror should be blown away with a blower, etc. 1. Turn the lock ring as far as possible in the clockwise and counterclockwise directions to line up the alignment marks on the lock ring and viewfinder barrel. Alignment marks Eyepiece Lock ring 2.
Follow the steps below to install the AJ-MC700P microphone kit (sold separately). 1. Open the microphone holder. Viewfinder Microphone holder 2. Mount the microphone. 3. Plug the microphone connector cable into the MIC IN jack.
PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region: 1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024 (770) 338-6835 Central Region: 1707 N Randall Road E1-C-1, Elgin, IL 60123 (847) 468-5200 WESTERN ZONE: 3330 Cahuenga Blvd W.
