Camcorder User Manual

ManualsBrandsPanasonic ManualsCamcorderAJ-HPX3100G

Before operating this product, please read the insructions carefully and save this manual for

future use.

VQT3A79

FJ0910AT0 -FJ @

Printed in Japan

ENGLISH

Memory Card Camera-Recorder

Operating Instructions

Model No. AJ-HPX3100G

This product is eligible for the P2HD 5 Year

Warranty Repair Program. For details, see

page 7.

AJ-HPX3100G(VQT3A79)_E.book 1 ページ２０１０年９月１７日　金曜日　午後９時２１分

Summary of content (208 pages)

PAGE 1
AJ-HPX3100G(VQT3A79)_E.book 1 ページ２０１０年９月１７日金曜日午後９時２１分 This product is eligible for the P2HD 5 Year Warranty Repair Program. For details, see page 7. Operating Instructions Memory Card Camera-Recorder Model No. AJ-HPX3100G Before operating this product, please read the insructions carefully and save this manual for future use.
PAGE 2
AJ-HPX3100G(VQT3A79)_E.book 2 ページ２０１０年９月１７日金曜日午後９時２１分 Read this first! CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.
PAGE 3
AJ-HPX3100G(VQT3A79)_E.book 3 ページ２０１０年９月１７日金曜日午後９時２１分 EMC NOTICE FOR THE PURCHASER/USER OF THE APPARATUS 1. Applicable standards and operating environment (AJ-HPX3100G) The apparatus is compliant with: z standards EN55103-1 and EN55103-2 1996.11, and z electromagnetic environments E1, E2, E3, E4, and E5. 2.
PAGE 4
AJ-HPX3100G(VQT3A79)_E.book 4 ページ２０１０年９月１７日金曜日午後９時２１分 EU To remove the battery Main Power Battery (Ni-Cd / Ni-MH / Li-ion Battery) z To detach the battery, please proceed in the reverse order of the installation method described in this manual. (Refer to page 108 for the detail.) z If a battery made by any other manufacturer is to be used, check the Operating Instructions accompanying the battery.
PAGE 5
AJ-HPX3100G(VQT3A79)_E.book 5 ページ２０１０年９月１７日 AJ-HPX2000P(English)TOC.fm 金曜日午後９時２１分 master: right Contents Read this first! ..................................................................................... 2 General Features of Camera unit ..................................................................... 9 Features of Recorder/player unit ...................................................... 10 Features of the Input/Output unit ......................................................
PAGE 6
AJ-HPX3100G(VQT3A79)_E.book 6 ページ２０１０年９月１７日 AJ-HPX2000P(English)TOC.fm 金曜日午後９時２１分 master: left Assigning Functions to USER Buttons.............................................. 55 Selecting Audio Input Signals and Adjusting Recording Levels........ 57 Setting External Reference Signal and GENLOCK .......................... 61 Setting Time Data ............................................................................. 62 Viewfinder Screen Status Displays .............................................
PAGE 7
AJ-HPX3100G(VQT3A79)_E.book 7 ページ２０１０年９月１７日 AJ-HPX2000P(English)TOC.fm 金曜日午後９時２１分 master: right Index ................................................................................................................................ 204 z The SD card logo is a registered trademark. z SDHC Logo is a trademark of SD-3C, LLC. z MMC (Multi Media Card) is a registered trademark of Infineon Technologies AG.
PAGE 8
AJ-HPX3100G(VQT3A79)_E.book 8 ページ２０１０年９月１７日金曜日午後９時２１分 General Attention Adjust the following two settings when using the unit for the first time. z Adjust the black-balance setting when using the unit for the first time. (Refer to page 52) z The unit is delivered from the factory with the color TV standard not yet specified. To revise the settings for frame frequency according to the TV standard, refer to the procedures described on page 14.
PAGE 9
AJ-HPX3100G(VQT3A79)_E.book 9 ページ２０１０年９月１７日金曜日午後９時２１分 Features of Camera unit _ Multi-format By applying the interlace drive/progressive drive (reading all pixels) to the 2.2-mega pixel CCD, the unit supports a variety of recording methods. (Refer to page 48) _ DRS (Dynamic Range Stretcher) function With this function, the dynamic range of high brightness areas that may be skipped with white blanks in an ordinary recording method can be expanded by compressing images and maintaining the contrast.
PAGE 10
AJ-HPX3100G(VQT3A79)_E.book 10 ページ２０１０年９月１７日金曜日午後９時２１分 Features of Recorder/player unit _ Multiple Slots AJ-HPX3100 is equipped with 2 slots for P2 cards. 2 cards may be inserted in these slots for continuous recording. They also provide new recording capabilities specific to memory cards. z Hot-Swap recording The Hot-Swap capability allows cards not in use to be replaced without interrupting recording. This facilitates continuous recording.
PAGE 11
AJ-HPX3100G(VQT3A79)_E.book 11 ページ２０１０年９月１７日金曜日午後９時２１分 _ Text Memos & Shot Marks _ Front-mounted Sound Level Control Mechanism AJ-HPX3100 features a front-mounted control for fine adjustment of the sound recording level. This control is particularly effective for adjusting the sound level when you are shooting without a sound recordist. The control can be disabled.
PAGE 12
AJ-HPX3100G(VQT3A79)_E.book 12 ページ２０１０年９月１７日金曜日午後９時２１分 Features of the Input/Output unit _ Independent Dual HD SDI output equipped as standard The HD SDI signals output from the SDI OUT connector and the MON OUT connector are each independent. Embedded audio is superimposed on HD SDI output. Also, in SD mode, independent dual SD SDI signals can be output from the SDI OUT connector and the MON OUT connector. _ Features USB2.0 port (HOST/DEVICE) By connecting with a PC via USB2.
PAGE 13
AJ-HPX3100G(VQT3A79)_E.book 13 ページ２０１０年９月１７日金曜日午後９時２１分 Dimensions drawing Unit: mm (inch) 140 (5- 1 / 2 ) 335.8 (13- 1 / 4 ) 270.
PAGE 14
AJ-HPX3100G(VQT3A79)_E.book 14 ページ２０１０年９月１７日金曜日午後９時２１分 Color TV Standard Settings (Settings for frame frequency) The unit is delivered with the color TV standard not yet specified. To revise the settings for frame frequency according to the preferred standard, refer to the procedures described below. 1 After connecting the unit to the power supply and then turning on the power, press the MENU SW button while pressing the LIGHT SW button to open OPTION MENU.
PAGE 15
AJ-HPX3100G(VQT3A79)_E.
PAGE 16
AJ-HPX3100G(VQT3A79)_E.book 16 ページ２０１０年９月１７日金曜日午後９時２１分 Parts and their Functions Power Supply and Accessory Mounting Section 17 14 15 14 4 13 16 18 12 2 10 7 8 5 9 6 1 1. POWER switch Used to turn on/off the power. 2. Battery mount A battery pack from Anton/Bauer is mounted here. > [Mounting the Battery and Setting the Battery Type] (page 109) 3. DC IN (external power input) socket (XLR, 4P) camera-recorder is connected to an external DC power supply.
PAGE 17
AJ-HPX3100G(VQT3A79)_E.book 17 ページ２０１０年９月１７日金曜日午後９時２１分 12. VF connector (20 Pin) Installs the viewfinder (AJ-HVF21KG, AJ-CVF100G, which are optional). > [Viewfinder] (page 30) Note Please be aware that when the SYSTEM MODE is set at 480/59.94i or 576/50i the image quality displayed on the viewfinder screen, and the image quality actually recorded and output from this unit will be different. 13. GPS connector Parts and their Functions This connects the optional GPS unit AJ-GPS910G. 14.
PAGE 18
AJ-HPX3100G(VQT3A79)_E.book 18 ページ２０１０年９月１７日金曜日午後９時２１分 Audio (input) Function Section 15 8 2 12 3 9 4 6 11 1 16 16 1. MIC IN (microphone input) jack (XLR, 5-pin) A microphone (optional accessory) is connected here. Power for the microphone comes from this jack. A remote microphone may be connected. When a microphone is used, set the power to ON through the menu option FRONT MIC POWER. The menu item FRONT MIC POWER is found in the screen on the MAIN OPERATION page.
PAGE 19
AJ-HPX3100G(VQT3A79)_E.book 19 ページ２０１０年９月１７日金曜日午後９時２１分 7. Microphone input +48V ON/OFF switch This is the ON/OFF switch providing power to the microphone connected to the 5.AUDIO IN CH1/3 / CH2/ 4 (audio input channel 1/3 / 2/4) connector. +48V: OFF: Provides +48 V to the microphone. Does not provide +48 V to the microphone. Note Parts and their Functions If the REAR MIC POWER menu option is not set to “ON” then power is not supplied regardless of the switch position.
PAGE 20
AJ-HPX3100G(VQT3A79)_E.book 20 ページ２０１０年９月１７日金曜日午後９時２１分 Audio (output) Function Section 10. AUDIO OUT connector (XLR, 5-pin) This connector outputs audio signals recorded on Channels 1/2 or 3/4. Output signals are selected with the 11.MONITOR SELECT (audio channel) CH1/2 / CH3/4 selector switch. 11. MONITOR SELECT (audio channel) CH1/2 / CH3/4 selector switch Use this switch to select the audio channel whose signals are output to the speakers, earphones or AUDIO OUT connector.
PAGE 21
AJ-HPX3100G(VQT3A79)_E.book 21 ページ２０１０年９月１７日金曜日午後９時２１分 Shooting and Recording/Playback Functions Section 5 8 10 11 12 13 1 15 18 2 3 a 6 19 20 21 22 4 a 14 17 16 9 1. CC FILTER/ND FILTER (filter switching) 3. SHUTTER switch Used to enable or disable the electronic shutter. controls These are used to select the filter in accordance with the subject’s brightness and color temperature.
PAGE 22
AJ-HPX3100G(VQT3A79)_E.book 22 ページ２０１０年９月１７日金曜日午後９時２１分 5. SYNCHRO SCAN ADJUSTMENT buttons These buttons are enabled when the 3.SHUTTER switch is positioned at [ON] and synchro scan is selected. They are used to adjust the speed of the synchro scan. The – button decreases shutter speed; the + button increases shutter speed. If you shoot a PC monitor, for example, you should adjust shutter speed so that the horizontal bars in the viewfinder will produce less noise. 6.
PAGE 23
AJ-HPX3100G(VQT3A79)_E.book 23 ページ２０１０年９月１７日金曜日午後９時２１分 17. BUSY (operation mode display) lamp This lamp indicates the active status of the SD memory card. It stays illuminated when the card is active. Note While the lamp is on, do not insert or remove the card. The SD memory card might break. 18. Focal plane index ( ) 19. MARKER SEL, MODE CHK / MENU CANCEL switch This is the dual purpose spring switch for MARKER selection and MODE CHECK/MENU CANCEL.
PAGE 24
AJ-HPX3100G(VQT3A79)_E.book 24 ページ２０１０年９月１７日 28 24 午後９時２１分 27 26. MON OUT (monitor output) connector 29 25 金曜日 30 This is the video output connector for the monitor. According to the MONITOR OUT MODE menu option, images independent of SDI OUT can be output. Also, with the menu settings, HD-SDI or down converted SDSDI or VBS can be selected. Up convert is not supported. You can select the MONITOR OUT MODE menu option from the screen of the SYSTEM SETTING page.
PAGE 25
AJ-HPX3100G(VQT3A79)_E.book 25 ページ２０１０年９月１７日金曜日午後９時２１分 Menu Operation Section Parts and their Functions 2 1 5 4 3 1. MENU button Used to turn on/off the menu. 2. JOG dial button With the menu open, this button is used to navigate through menu pages, select options and specify values. > [Setting Menu Options] (page 160) 3. SD memory card insertion slot An SD memory card (optional accessory) is inserted here. It is used when writing or saving menu data or lens files on an SD memory card. 4.
PAGE 26
AJ-HPX3100G(VQT3A79)_E.book 26 ページ２０１０年９月１７日金曜日午後９時２１分 Time Code Section 5 6 7 8 1 9 1. GENLOCK IN connector (BNC) This connector is used to input a reference signal before the camera unit is gen-locked, or before the time code is externally locked. > [Externally Locking the Time Code] (page 68) 2. SDI IN connector (BNC) When GENLOCK is set on the camera, or when the time code is externally locked, reference signals are input.
PAGE 27
AJ-HPX3100G(VQT3A79)_E.book 27 ページ２０１０年９月１７日金曜日午後９時２１分 Warning and Status Display Functions 6 5 1 2 3 4 Parts and their Functions 7 1. Back tally lamp When the 2.BACK TALLY switch is set to [ON], the lamp behaves in the same way as the front tally lamp at the viewfinder. 2. BACK TALLY switch This switch controls the action of the 1.back and 7.rear tally lamps. ON: Back and rear tally lamps enabled. OFF: Back and rear tally lamps disabled. 3.
PAGE 28
AJ-HPX3100G(VQT3A79)_E.book 28 ページ２０１０年９月１７日金曜日午後９時２１分 Display Window Functions P2 card/battery-remaining level indications Media-remaining space indication bar The bar indicates the remaining free space on each P2 card, using a seven-segment display. Each segment can represent either three or five minutes of remaining free space, depending on the value set through the menu option CARD REMAIN/. According to the set value, the segments disappear one-by-one.
PAGE 29
AJ-HPX3100G(VQT3A79)_E.book 29 ページ２０１０年９月１７日金曜日午後９時２１分 LCD Monitor 5. CURSOR and SET buttons The four triangular buttons are the CURSOR buttons, and the center rectangular one is the SET button. They are used to select a thumbnail and manipulate the thumbnail menu. > [Manipulating Clips with Thumbnails] (page 118). 2 Parts and their Functions 6. EXIT/CANCEL button Used to return the display to the previous state when the thumbnail menu or the property screen is displayed.
PAGE 30
AJ-HPX3100G(VQT3A79)_E.book 30 ページ２０１０年９月１７日金曜日午後９時２１分 Viewfinder An HD viewfinder can be used with this unit. It is recommended to use the optional AJ-HVF21KG or AJ-CVF100G (59.94/50 Hz switching).
PAGE 31
AJ-HPX3100G(VQT3A79)_E.book 31 ページ２０１０年９月１７日金曜日午後９時２１分 9. Eyepiece Note Do not leave the eyepiece aimed at the sun. Doing so may damage the internal components. If, when fitting a large lens, there is insufficient space between the top of the lens and the bottom of the viewfinder, the positions of the slide rails can be shifted upwards slightly by repositioning the screws. a 10.
PAGE 32
AJ-HPX3100G(VQT3A79)_E.book 32 ページ２０１０年９月１７日金曜日午後９時２１分 Recording and Playback P2 Cards Inserting P2 Cards 3 Insert a P2 card into the P2 card slot until the EJECT button pops up. Note When using the camera-recorder for the first time, be sure to set the time data beforehand. > On how the time data is set, see [Setting Time Data] (page 62). 1 Turn on the POWER switch. EJECT button Insert the card with the logo facing up. 4 POWER: ON 2 Push the eject button that pops up to the right.
PAGE 33
AJ-HPX3100G(VQT3A79)_E.book 33 ページ２０１０年９月１７日金曜日午後９時２１分 Removing P2 Cards 1 2 3 Open the card slot cover. Raise the EJECT button. Then, depress the EJECT button to release the P2 card so that you can remove it. The P2 CARD ACCESS LEDs may be set to stay off using the menu option ACCESS LED. The menu item ACCESS LED is found in the
PAGE 34
AJ-HPX3100G(VQT3A79)_E.book 34 ページ２０１０年９月１７日金曜日午後９時２１分 How to handle data recorded on P2 cards The P2 card is a semiconductor memory card that is used as the recording medium in the professional video production and broadcasting devices that make up the DVCPRO P2 Series. z Since data recorded in the DVCPRO P2 format or AVCIntra are in a file format, they have excellent compatibility with PCs.
PAGE 35
AJ-HPX3100G(VQT3A79)_E.book 35 ページ２０１０年９月１７日金曜日午後９時２１分 Basic Procedures This section describes the basic procedure for shooting and recording. Before you embark on a shoot, pre-inspect your system to ensure that it works properly. * For directions on inspecting your memory card camera-recorder, see [Inspections Before Shooting] (page 146). Switch Setting When a battery and P2 cards are installed, set the switches as detailed below, before starting to use your unit.
PAGE 36
AJ-HPX3100G(VQT3A79)_E.book 36 ページ２０１０年９月１７日金曜日午後９時２１分 White/Black Balance Adjustment to Recording Completion White/Black balance adjustment to recording completion For shooting, follow the steps below. 1 2 Select a filter according to light conditions. When the white balance is saved: Position the WHITE BAL switch to [A] or [B]. When the white or black balance is not saved and you have no time to adjust the white balance: Position the WHITE BAL switch to [PRST].
PAGE 37
AJ-HPX3100G(VQT3A79)_E.book 37 ページ２０１０年９月１７日金曜日午後９時２１分 Normal Recording REC button starts recording of video and sound on the P2 card. A cluster of data that consists of video and sound generated through a shooting action, together with such added information as meta data, is called a “clip”. Normal Recording and Native Recording Normal recording (Pull-down recording) Images at 24P (23.98p: referred to as 24P) are pulled down in 2:3 mode. Images at 30P (29.
PAGE 38
AJ-HPX3100G(VQT3A79)_E.book 38 ページ２０１０年９月１７日金曜日午後９時２１分 PRE-RECORDING function The internal memory of your unit is capable of storing several seconds of video and sound data coming from the camera. This capability can be used to record video and sound several seconds before either the REC button is pressed to start recording. To use this function, the menu option PRE REC MODE must be set to “ON”. The storage duration of the internal memory can be set from the menu option PRE REC TIME.
PAGE 39
AJ-HPX3100G(VQT3A79)_E.book 39 ページ２０１０年９月１７日金曜日午後９時２１分 Loop Recording When two P2 card slots contain cards, this function allows the target P2 card to be switched in order. Even when the free space of a P2 card is used up, this function continues recording while erasing existing data. To use this function, the menu option LOOP REC MODE must be set to “ON”. The menu item FLOOP REC MODE is found in the screen on the SYSTEM SETTING page.
PAGE 40
AJ-HPX3100G(VQT3A79)_E.book 40 ページ２０１０年９月１７日金曜日午後９時２１分 Shooting procedures when INTERVAL REC is ON 1 2 3 z Setting the menu option INTERVAL REC MODE to “OFF”. Following basic operations of shooting and recording according to “Basic Procedures”, lock the camera securely. Check that “i” is blinking in the display, and that the interval recording mode is selected. Press REC button. Interval recording starts.
PAGE 41
AJ-HPX3100G(VQT3A79)_E.book 41 ページ２０１０年９月１７日金曜日午後９時２１分 Shooting procedures for the ONE SHOT mode of INTERVAL REC After setting the ONE SHOT mode of INTERVAL REC, follow these steps: 1 2 Following basic operations of shooting and recording according to “Basic Procedures”, lock the camera securely. Press the REC button. 3 Press the STOP button. The video stored in memory are generated as one clip.
PAGE 42
AJ-HPX3100G(VQT3A79)_E.book 42 ページ２０１０年９月１７日金曜日午後９時２１分 ONE CLIP REC Function This function compiles multiple recordings into a combined clip and does not isolate single recordings (from REC START to STOP) to single clips. REC Start First Recording REC Start REC Start Second Recording Nth Recording* REC stop REC stop Set the ONE CLIP REC MODE item to “OFF” in the Menu.
PAGE 43
AJ-HPX3100G(VQT3A79)_E.book 43 ページ２０１０年９月１７日金曜日午後９時２１分 Precautions when in ONE CLIP REC mode Recording and Playback z The INTERVAL REC and LOOP REC functions cannot be used at the same time. z This mode does not operate when the REC SIGNAL item is set to “SDI”. The menu item REC SIGNAL is found in the screen on the SYSTEM SETTING page. z The menu and thumbnail operations are restricted as follows when combining to the clip.
PAGE 44
AJ-HPX3100G(VQT3A79)_E.book 44 ページ２０１０年９月１７日金曜日午後９時２１分 Recording Review Function When recording is paused, pressing the RET button automatically locates the last two seconds of video just recorded, and the viewfinder provides video playback. After playback, the camera-recorder is again ready to start recording. The picture location/playback duration can be increased to up to 10 seconds by continuously pressing the RET button.
PAGE 45
AJ-HPX3100G(VQT3A79)_E.book 45 ページ２０１０年９月１７日金曜日午後９時２１分 Normal and Variable Speed Playback Variable speed playback The FF and REW buttons provide 32a and 4a fast playbacks and fast reverse playbacks. When playback is paused, the FF button locates the beginning of the next clip while maintaining the pause mode. When playback is paused, the REW button locates the beginning of the current clip while maintaining the pause mode.
PAGE 46
AJ-HPX3100G(VQT3A79)_E.book 46 ページ２０１０年９月１７日金曜日午後９時２１分 Shot Mark Function A shot mark is added to the thumbnail of a clip to distinguish that clip from others. With the LCD monitor, only clips that have shot marks can be viewed and/or played back. Shot marks may also be added or erased using clip thumbnails. > [Shot Mark] (page 123) Notes Adding Shot Marks To add a shot mark during recording, press the SHOT MARK button.
PAGE 47
AJ-HPX3100G(VQT3A79)_E.book 47 ページ２０１０年９月１７日金曜日午後９時２１分 Adjustments and Settings for Recording Multi Format Video system and Recording format Adjustments and Settings for Recording The unit uses an interlace/progressive scan (reading all pixels) switchable type CCD. With combinations of the SYSTEM MODE and CAMERA MODE menu options, you can select a video system from among 12 types including HD (1080i) and SD.
PAGE 48
AJ-HPX3100G(VQT3A79)_E.book 48 ページ２０１０年９月１７日金曜日午後９時２１分 Recording formats and output connector signal formats The table below shows the formats used to record signals from the CCD and externally input signals along with the formats for signals output from the output connectors. Menu setting Recording and output status SYSTEM REC CAMERA REC MODE SIGNAL FORMAT MODE item item item item CAM 108059.94i 1080-50i 48059.94i *1 *2 *3 *4 *5 Video 1080-29.
PAGE 49
AJ-HPX3100G(VQT3A79)_E.book 49 ページ２０１０年９月１７日金曜日午後９時２１分 Adjusting the White balance and Black Balance To record high-quality video with the unit, the black and white balances must be adjusted according to conditions. For higher quality, it is recommended that the adjustments should be made in this order AWB (white balance adjustment) > ABB (black balance adjustment) > AWB (white balance adjustment). Adjusting the White Balance Whenever light conditions change, the white balance must be re-adjusted.
PAGE 50
AJ-HPX3100G(VQT3A79)_E.book 50 ページ２０１０年９月１７日金曜日午後９時２１分 Detection area for the white balance Retaining white balances The detection area for the white balance is selectable between 90%, 50% and 25%, using the menu option AWB AREA. The detection area is factory-set to 25%. The menu item AWB AREA is found in the screen on the CAM OPERATION page. 90% 50% 25% When you have no time to adjust the white balance Position the WHITE BAL switch at [PRST].
PAGE 51
AJ-HPX3100G(VQT3A79)_E.book 51 ページ２０１０年９月１７日金曜日午後９時２１分 Setting Color Temperature Manually The white balance can be manually adjusted by setting the color temperature. Manual color temperature settings can be performed for each of the WHITE BAL switch positions: PRST, A and B. The color temperature is set using the menu options COLOR TEMP PRE, AWB A TEMP, and AWB B TEMP. These menu items are found in the screen on the CAM OPERATION page.
PAGE 52
AJ-HPX3100G(VQT3A79)_E.book 52 ページ２０１０年９月１７日金曜日午後９時２１分 Adjusting the Black Balance The black balance must be adjusted when: z You use your unit the first time; z Your unit has not been used for some time; z The ambient temperature has changed substantially; z The gain switchover value has been changed; or z S.GAIN (super gain) has been set with the USER MAIN/ USER1/USER2 button. z When you are changing the assignment for DS.
PAGE 53
AJ-HPX3100G(VQT3A79)_E.book 53 ページ２０１０年９月１７日金曜日午後９時２１分 Setting the Electronic Shutter This section provides a description of the electronic shutter, together with setting and handling directions. Shutter Modes The table below lists the shutter modes in which the unit’s electronic shutter can be used as well as the shutter speeds which can be selected.
PAGE 54
AJ-HPX3100G(VQT3A79)_E.book 54 ページ２０１０年９月１７日金曜日午後９時２１分 Setting the Shutter Mode and Speed The shutter speed in any shutter mode is set using the SHUTTER switch. In SYNCHRO SCAN mode, shutter speed can be switched easily, using the SYNCHRO SCAN ADJUSTMENT switches (+/–) on the side panel. Note that the range of selectable shutter speeds may be predefined; whether or not to use the SYNCHRO SCAN mode may be determined through the and screens.
PAGE 55
AJ-HPX3100G(VQT3A79)_E.book 55 ページ２０１０年９月１７日金曜日午後９時２１分 Assigning Functions to USER Buttons The USER MAIN SW, USER1 SW , USER2 SW, SHOT MARK SW (USER3 SW) and TEXT MEMO SW (USER4 SW) buttons can be assigned user-selected functions. To select desired functions, use the menu items USER MAIN SW, USER1 SW , USER2 SW, SHOT MARK SW (USER3 SW) and TEXT MEMO SW (USER4 SW). These options can be found in the screen, which is accessible from the CAM OPERATION page.
PAGE 56
AJ-HPX3100G(VQT3A79)_E.book 56 ページ２０１０年９月１７日金曜日午後９時２１分 channel 1 or audio channel 3 (you can switch with the VR SELECT menu option on the screen of the MAIN OPERATION page) is assigned. Pressing the button switches the input signal in the following order: FRONT > REAR > W.L. Note that the AUDIO IN switch can also be used to change the input signal: later specification takes precedence.
PAGE 57
AJ-HPX3100G(VQT3A79)_E.book 57 ページ２０１０年９月１７日金曜日午後９時２１分 Selecting Audio Input Signals and Adjusting Recording Levels AJ-HPX3100 supports independent 4-channel sound recording in any recording format. When the AUDIO SELECT CH1/3 / CH2/4 switches are set to [AUTO], the recording level of audio channel 1/2 (3/4 with the menu settings) is automatically adjusted. Also you can adjust manually by setting to [MAN] and using the AUDIO LEVEL CH1/ 3 / CH2/4 controls and the F.AUDIO LEVEL controls.
PAGE 58
AJ-HPX3100G(VQT3A79)_E.book 58 ページ２０１０年９月１７日金曜日午後９時２１分 Recording level adjustment You can select the recording level adjustment method from among three methods, the adjustment control/adjustment with menu options/automatic adjustment. With the VR Select menu option, select the two channels, CH1/2 or CH3/4, to assign to the adjustment controls. The VR SELECT menu option can be selected from the screen of the MAIN OPERATION page.
PAGE 59
AJ-HPX3100G(VQT3A79)_E.book 59 ページ２０１０年９月１７日金曜日午後９時２１分 Adjustment with AUDIO LEVEL CH1/3 / CH2/4 knobs Adjust the AUDIO LEVEL CH1/3 / CH2/4 knobs while looking at the audio channel level meter in the display window, or the audio level meter display in the LCD monitor. Also when the bar at the highest level (0dB) is passed, the OVER display lights up to indicate that the input volume is too great. It is necessary to adjust such that 0 dB will not be displayed even at the maximum.
PAGE 60
AJ-HPX3100G(VQT3A79)_E.
PAGE 61
AJ-HPX3100G(VQT3A79)_E.book 61 ページ２０１０年９月１７日金曜日午後９時２１分 Setting External Reference Signal and GENLOCK Locking video signal to external reference signal You can lock the video signals output from this unit to a reference signal provided externally. This unit can receive external reference signals from the following two connectors.
PAGE 62
AJ-HPX3100G(VQT3A79)_E.book 62 ページ２０１０年９月１７日金曜日午後９時２１分 Setting Time Data This unit provides time codes, user bits, and day-hour (real time) data as time data, and they are recorded in frames synchronous with images, and are also recorded as data for clip metadata files. It also includes a CTL counter and camera ID. Description of time data Time code The TCG switch can be used to switch between Rec run and free run. Free run: The time code always advances even when the power is turned off.
PAGE 63
AJ-HPX3100G(VQT3A79)_E.book 63 ページ２０１０年９月１７日金曜日午後９時２１分 Recording time code and user bits The number of frames for TC varies with the settings for the input signal, system mode, and camera mode as follows. REC SIGNAL SYSTEM MODE 1080-59.
PAGE 64
AJ-HPX3100G(VQT3A79)_E.book 64 ページ２０１０年９月１７日金曜日午後９時２１分 Setting of the User bits LTC UB is selected with the UB MODE menu option, and VITC UB is selected with the VITC UB MODE menu option. You can select each menu option from the screen of the MAIN OPERATION page. USER (UB MODE only) The included user value is recorded. A user value is input through the display window. The recorded user value is retained even if the power is turned off.
PAGE 65
AJ-HPX3100G(VQT3A79)_E.book 65 ページ２０１０年９月１７日金曜日午後９時２１分 The frame rate information of user bits in Native recording is as follows.
PAGE 66
AJ-HPX3100G(VQT3A79)_E.book 66 ページ２０１０年９月１７日金曜日午後９時２１分 Setting the Internal Clock’s Date and Time 1 2 3 4 Position the DISPLAY switch at [UB]. Press the HOLD button to display a date in the display window. Position the TCG switch at [SET]. Use the CURSOR and SET buttons to set the year, month and day (Y/M/D). Note that any later than 2037 cannot be set. ! button: Shifts the target (blinking) digit to the right. " button: Shifts the target (blinking) digit to the left.
PAGE 67
AJ-HPX3100G(VQT3A79)_E.book 67 ページ２０１０年９月１７日金曜日午後９時２１分 Setting the Time Code 1 2 3 Note 1 Set the menu option TC MODE to “DF” or “NDF”. Use the CURSOR buttons to set the time code. The time code setting range extends from 00:00:00:00 to 23:59:59:29 (59.94 Hz), 23:59:59:23 (24PN) or to 23:59:59:24 (50 Hz). ! button: Shifts the target (blinking) digit to the right. " button: Shifts the target (blinking) digit to the left. # button: Advances the blinking number by one digit.
PAGE 68
AJ-HPX3100G(VQT3A79)_E.book 68 ページ２０１０年９月１７日金曜日午後９時２１分 Externally Locking the Time Code The unit’s internal time code generator can be locked to an external generator. In addition, the external time code generator can be locked to the unit’s internal generator. Example of connections for external locking As the figure shows, connect both the reference video signal and reference time code.
PAGE 69
AJ-HPX3100G(VQT3A79)_E.book 69 ページ２０１０年９月１７日金曜日午後９時２１分 Example 3: When the unit and an external device are locked to the external time code generator, which is connected externally, and when simultaneous recording is made by using the TC OUT output signals. Example 4: When the unit and an external device are locked to the external time code generator and when several units of the camera are connected in a cascade configuration.
PAGE 70
AJ-HPX3100G(VQT3A79)_E.book 70 ページ２０１０年９月１７日金曜日午後９時２１分 Example 5: When an external device is locked to the time code generator of the unit. Example 6: When an external device is locked to the time code generator of camera-recorder, which is connected in a cascade configuration.
PAGE 71
AJ-HPX3100G(VQT3A79)_E.book 71 ページ２０１０年９月１７日金曜日午後９時２１分 To externally lock the time code Follow the steps below. 1 2 3 4 Turn on the POWER switch. Position the TCG switch at [F-RUN]. Connect the DC IN socket with the external power supply before removing the battery pack, in order to keep the time code generator energised. If the battery pack is removed first, there is no guarantee that the time code will stay externally locked. Position the DISPLAY switch at [TC].
PAGE 72
AJ-HPX3100G(VQT3A79)_E.book 72 ページ２０１０年９月１７日金曜日午後９時２１分 Providing an ID to the Camera The camera ID is specified through the screen. The ID can include up to 10 alphanumeric characters, symbols, and/or spaces. Note When the settings menu is displayed, outputting color bar signals does not indicate the camera ID. 1 Go to the screen from the CAM OPERATION page and turn the JOG dial button to move the cursor to options [ID1:] [ID3:].
PAGE 73
AJ-HPX3100G(VQT3A79)_E.book 73 ページ２０１０年９月１７日金曜日午後９時２１分 Setting UMID Information The unit supports UMID (Unique Material Identifier) metadata. You need to specify as UMID information the country where you live (using up to three characters), organisation or company (up to four characters) and user name (up to four characters). For the country name, you must use abbreviations prescribed in the ISO3166 Country 6 To exit the menu, press the MENU button. Code*1.
PAGE 74
AJ-HPX3100G(VQT3A79)_E.book 74 ページ２０１０年９月１７日金曜日午後９時２１分 CTL Count Setting and Display By setting the DISPLAY switch to “CTL”, CTL count is displayed on the time count indication of the LCD display window. The CTL count is displayed in ±12 hours with non-dropframe. The playback order of clips recorded on a P2 card is not linear as for VTRs. It is organized according to thumbnail operations or exchanging P2 cards, and the priority of recorded clips will be altered.
PAGE 75
AJ-HPX3100G(VQT3A79)_E.book 75 ページ２０１０年９月１７日金曜日午後９時２１分 Viewfinder Screen Status Displays In addition to video images, the viewfinder displays lamps and text that indicate the settings and operating status of the unit, together with messages, a center marker, a safety zone marker and the camera ID. Lamps in the Viewfinder Screen 2.
PAGE 76
AJ-HPX3100G(VQT3A79)_E.book 76 ページ２０１０年９月１７日金曜日午後９時２１分 Selecting Viewfinder Display Information To select the information items you want to have displayed in the viewfinder screen, go to the screens from the VF page, and turn on or off the appropriate options, or specify desired values. > For directions on setting the options, see [Setting Menu Options] (page 160).
PAGE 77
AJ-HPX3100G(VQT3A79)_E.book 77 ページ２０１０年９月１７日 Information Item 金曜日午後９時２１分 Indication Status 1. System mode This indicates the mode that the unit operates in. 1080-59.94 interlace mode 1080-50 interlace mode 480-59.94 interlace mode 576-50 interlace mode 1080-59.9i 1080-50i 480-59.9i 576-50i 2. Camera mode 60i 30P 24P 24PA 50i 25P 3. REC FORMAT Adjustments and Settings for Recording This indicates the video system when signals output from CCD are recorded on a P2 card or output as video signals.
PAGE 78
AJ-HPX3100G(VQT3A79)_E.book 78 ページ Information Item 金曜日 LOW/MID/HIGH –6 to 30 S.GAIN 30/36/42 DS.GAIN 6:/10:/12:/ 15:/20:/24:/ 28:/34: 11. Camera Warning and Report Area (related to AWB, ABB and switch settings) AWB A ACTIVE AWB B ACTIVE AWB A OK ¢.¢K AWB B OK ¢.¢K AWB BREAK ¢.¢K AWB NG COLOR TEMP LOW COLOR TEMP HIGH LEVEL OVER LOW LIGHT TIME OVER ATW MODE (Low light warning) 午後９時２１分 Indication 10.
PAGE 79
AJ-HPX3100G(VQT3A79)_E.book 79 ページ Information Item 12. User button functions UM: USER MAIN button U1: USER1 button U2: USER2 button U3: SHOT MARK (USER3) button U4: TEXT MEMO (USER4) button ２０１０年９月１７日金曜日 Indication Status INH S.GAIN ¢¢dB/OFF DS.GAIN ¢¢:/OFF S.IRIS ON/OFF I.OVR ON/OFF S.BLK –¢¢/OFF User buttons disabled. Selected S.GAIN Selected DS.GAIN Whether S.IRIS is ON or OFF. Iris override can be set (the IRIS OVERRIDE setting is ON). Status of SUPER BLACK (ON or OFF).
PAGE 80
AJ-HPX3100G(VQT3A79)_E.book 80 ページ２０１０年９月１７日 Information Item 13. System information and warnings SYSTEM ERROR-¢¢ CARD ERR ¢ REC WARNING OVER MAX# CLIPS TEMPORARY PAUSE BACKUP BATT EMPTY FAN STOP WIRELESS-RF EOM BOS EOS CANNOT REC CANNOT PLAY COMM ERROR TEXT MEMO TEXT MEMO INVALID MARK ON/OFF SHOT MARK INVALID UPDATING USB DEVICE USB HOST THUMBNAIL OPEN CLIP DISCONTINUED TC REGEN SLOT SELECT SLOT SELECT INVALID DIR NG CARD SLOT1/2 RUN DOWN CARD SLOT1/2 REAR XR AUTO TCG TCR (V)UBG (V)UBR CTL 15.
PAGE 81
AJ-HPX3100G(VQT3A79)_E.book 81 ページ２０１０年９月１７日 Information Item 20. WHITE BAL switch position 金曜日午後９時２１分 Indication Status A B P T WHITE BAL switch positioned at [A]. WHITE BAL switch positioned at [B]. WHITE BAL switch positioned at [PRST]. ATW mode is set. However it flashes when intensity and color are outside the operation range 21. Stored gain indication 6:/10:/12:/15:/20:/24:/ Storage gain (DS.GAIN) value (when active) 28:/34: ¢¢dB Current gain value. 23.
PAGE 82
AJ-HPX3100G(VQT3A79)_E.book 82 ページ２０１０年９月１７日金曜日午後９時２１分 Displays in mode check only Display screens and menu options !LED screen GAIN (0 dB) DS.GAIN SHUTTER WHITE PRE. EXTENDER B.GAMMA MATRIX COLOR COR. FILTER ATW FUNCTION screen Gain status DS. GAIN value Shutter status White balance status Extender status (EX2 or OFF) BLACK GAMMA status (ON or OFF) MATRIX status (A, B, or OFF) Color correction status (ON or OFF) Filter status ATW status Displays video output status and recording media information.
PAGE 83
AJ-HPX3100G(VQT3A79)_E.book 83 ページ２０１０年９月１７日 Display screen 金曜日午後９時２１分 Indication Status Displays the CAC active status and information. CAC INFO Screen Displays the CAC operation mode as ON/STOP/OFF. ON: CAC CONTROL in is set to “ON”, and CAC is operating. STOP: “ON” is selected in the menu, but data or lens conditions stop CAC from operating. OFF: “OFF” is selected in the menu, and CAC is not operating. CAC MODE Displays the CAC operating mode.
PAGE 84
AJ-HPX3100G(VQT3A79)_E.book 84 ページ２０１０年９月１７日金曜日午後９時２１分 Indications Available in the Viewfinder Screen Selectable between on and off through menu options Provided when the appropriate status is encountered. Provided during MODE CHECK* Selectable Provided during playback 1. System mode ± – z ± – 2. Camera mode ± – z ± – 3. REC FORMAT ± – z ± – 4. Shutter speed/mode ± ± z ± – 5. P2 card remaining free space ± – z ± – 6.
PAGE 85
AJ-HPX3100G(VQT3A79)_E.book 85 ページ２０１０年９月１７日金曜日午後９時２１分 Display Modes and Setting Changes/adjustment Result Messages The messages that appear on the viewfinder screen to indicate changes to settings and adjustment results may be limited, or set not to appear, through the menu option DISP MODE. This menu option can be found in the screen, which is accessible from the VF page. > For directions on navigating the menu, see [Setting Menu Options] (page 160).
PAGE 86
AJ-HPX3100G(VQT3A79)_E.book 86 ページ２０１０年９月１７日金曜日午後９時２１分 Setting the Marker Displays The center, safety zone, safety zone area and frame markers may be set to ON or OFF, along with specifications of the marker types. To set and select markers, go to the screen from the VF page and select the appropriate options. > For directions on navigating the menu, see [Setting Menu Options] (page 160).
PAGE 87
AJ-HPX3100G(VQT3A79)_E.book 87 ページ２０１０年９月１７日金曜日午後９時２１分 Adjusting and setting the LCD monitor Using the LCD Monitor 1 2 5 Turn on the POWER switch of the unit. Slide the OPEN button in the arrow 1 direction to open the LCD monitor in the arrow 2 direction. Through the menu option VF/LCD CHAR, specify whether or not the LCD should display the same characters as the viewfinder. The menu item VF/LCD CHAR is found in the screen on the SYSTEM SETTING page.
PAGE 88
AJ-HPX3100G(VQT3A79)_E.book 88 ページ２０１０年９月１７日金曜日午後９時２１分 Selection of video output signals The unit employs the SDI OUT connector and the MON OUT connector as connectors for outputting video signals. Settings of signals output from SDI OUT connector The type of output signal from the SDI OUT connector is in accordance with the SYSTEM MODE item. Additionally, the signal output from the SDI OUT connector is switched from the SDI OUT MODE item.
PAGE 89
AJ-HPX3100G(VQT3A79)_E.book 89 ページ２０１０年９月１７日金曜日午後９時２１分 Settings of signals output from MON OUT connector The MON OUT connector outputs HD SDI signals, downconverted SD SDI signals, and analog signals. In the MONITOR OUT item, set the video signal output from the MON OUT connector. The MONITOR OUT item can be selected from the screen on the SYSTEM SETTING page.
PAGE 90
AJ-HPX3100G(VQT3A79)_E.book 90 ページ２０１０年９月１７日金曜日午後９時２１分 Handling data Set data file configuration The unit employs 6 sets for the file data area. FACTORY data: The area for storing factory settings. Data cannot be revised with menu operations. USER data: The area for storing the data set by menu operations The FACTORY data is stored as the factory setting. CURRENT data: The area for storing the operating status of the unit The set value in this area is revised by menu operations.
PAGE 91
AJ-HPX3100G(VQT3A79)_E.book 91 ページ２０１０年９月１７日金曜日午後９時２１分 Setting Data Using an SD memory card An SD memory card (optional accessory) can be used as a setup card that stores up to eight files of settings menu specifications. This data allows you to quickly reproduce an optimum state. > (page 22). Handling SD memory cards An SD memory card may be inserted or removed, either before or after the power is turned on.
PAGE 92
AJ-HPX3100G(VQT3A79)_E.book 92 ページ２０１０年９月１７日金曜日午後９時２１分 To format an SD memory card 4 The settings menu disappears and the status of the unit is indicated at the top and bottom of the viewfinder screen. Note SD memory cards may be formatted via the thumbnail screen. > [Formatting SD memory cards] (page 131). 1 Navigate the menu to the screen. 2 Turn the JOG dial button to move the cursor to the menu option CARD CONFIG. 3 Press the JOG dial button.
PAGE 93
AJ-HPX3100G(VQT3A79)_E.book 93 ページ 5 ２０１０年９月１７日金曜日午後９時２１分 Press the JOG dial button. This moves the cursor to the entry area, putting the unit in entry mode. 12 Press the JOG dial button to display the following message: < SD CARD READ/WRITE > R.SELECT READ W.SELECT WRITE CARD CONFIG TITLE READ ; TITLE: 1: ******** 2: ******** 3: ******** 4: ******** :1 5: 6: 7: 8: # ******** ******** ******** ******** TITLE: Turn the JOG dial button until a desired character appears.
PAGE 94
AJ-HPX3100G(VQT3A79)_E.book 94 ページ２０１０年９月１７日金曜日午後９時２１分 14 To exit the menu, press the MENU button. 5 The settings menu disappears and the status of the unit is indicated at the top and bottom of the viewfinder screen. Press the JOG dial button to display the following message: Notes z It is possible to overwrite the setup file on the unit with a setup file from another device. Note that if the file is overwritten, the original setup file from the other device will be lost.
PAGE 95
AJ-HPX3100G(VQT3A79)_E.book 95 ページ２０１０年９月１７日金曜日午後９時２１分 How to Use the User Data It is possible to transfer settings and other data to the user area of the internal memory of the unit. This data allows you to quickly reproduce an optimum setup state. 2 Turn the JOG dial button to move the cursor to the option READ USER DATA. < SCENE > To write data, go to the screen from the FILE page. To read the written user data, go to the screen from the FILE page.
PAGE 96
AJ-HPX3100G(VQT3A79)_E.book 96 ページ２０１０年９月１７日金曜日午後９時２１分 How to Use Scene File Data It is possible to write the settings data into the scene file area of the internal memory of the unit, or to read data written in this area. Four types of scene files are available. This data allows you to quickly reproduce an optimum setup state. To change the settings, go to the screen from the FILE page. To write settings data for scene files 1 2 Navigate the menu to the SCENE screen.
PAGE 97
AJ-HPX3100G(VQT3A79)_E.book 97 ページ２０１０年９月１７日金曜日午後９時２１分 To read settings data for scene files 1 2 Navigate the menu to the screen. 3 Press the JOG dial button to blink scene file numbers. Then, turn the dial button to select a desired scene file number. Turn the JOG dial button to move the cursor to the option SCENE SEL. To return data for scene files to their defaults 1 2 Navigate the menu to the screen. 3 Press the JOG dial button to blink scene file numbers.
PAGE 98
AJ-HPX3100G(VQT3A79)_E.book 98 ページ２０１０年９月１７日金曜日午後９時２１分 To title settings data for scene files 1 2 10 Press the JOG dial button. The following message is displayed. Navigate the menu to the screen. Turn the JOG dial button to move the cursor to the option [TITLE 1 - 4] for the appropriate scene file. < SCENE > READ USER DATA SCENE SEL READ WRITE RESET # # :1 TITLE: 11 Turn the JOG dial button to move the cursor to TITLE1 : ******** TITLE2 : ******** YES. Then, press the dial button.
PAGE 99
AJ-HPX3100G(VQT3A79)_E.book 99 ページ２０１０年９月１７日金曜日午後９時２１分 Resetting Menu Option Settings to Defaults The menu settings can be reset to their defaults. To reset the settings to their defaults, select the menu option READ FACTORY DATA in the screen, which is accessible from the FILE page. All settings will be reset to their defaults.
PAGE 100
AJ-HPX3100G(VQT3A79)_E.book 100 ページ２０１０年９月１７日金曜日午後９時２１分 To save the lens file into the built-in memory 7 Select the file No. 1 Using the menu operations, open the screen from the FILE page. 2 Turn the JOG dial button to move the arrow (cursor) to the FILE NO. item. 3 Press the JOG dial button and the file number will flash. Turn the JOG dial button to select the file (1 to 8) to be recorded. < LENS FILE > # FILE NO.
PAGE 101
AJ-HPX3100G(VQT3A79)_E.book 101 ページ２０１０年９月１７日金曜日午後９時２１分 13 Press the JOG dial button. 14 Turn the JOG dial button to move the arrow (cursor) to YES, and press the JOG dial button. The following message is displayed. The current white shading correction value, the flare compensation value, and the RB gain offset correction value are stored in the built-in memory of the unit.
PAGE 102
AJ-HPX3100G(VQT3A79)_E.book 102 ページ２０１０年９月１７日金曜日午後９時２１分 To write in and read out the lens file to/from the SD memory card The contents of the eight lens files stored in the unit’s internal memory can be saved onto an SD memory card as card files under a single title. A total of eight titles can be saved on an SD memory card. Furthermore, the eight lens files saved under one title on an SD memory card can be loaded into the unit’s internal memory.
PAGE 103
AJ-HPX3100G(VQT3A79)_E.book 103 ページ２０１０年９月１７日金曜日午後９時２１分 Loading lens files from the SD memory card 1 Using menu operations, open the screen from the FILE page. 2 Turn the JOG dial button to move the arrow (cursor) to the CARD FILE SELECT item. 3 Press the JOG dial button and the card file number will flash. Turn the JOG dial button to select the file (1 to 8) to be read.
PAGE 104
AJ-HPX3100G(VQT3A79)_E.book 104 ページ２０１０年９月１７日金曜日午後９時２１分 Chromatic Aberration Compensation (CAC) CAC is a function that automatically corrects registration errors mainly caused by slight chromatic aberration, which cannot be corrected with lenses, and minimizes color weepage on the images. What is the chromatic aberration? CAC operation Chromatic aberration means magnification ratio chromatic aberration.
PAGE 105
AJ-HPX3100G(VQT3A79)_E.book 105 ページ２０１０年９月１７日金曜日午後９時２１分 To read the CAC FILE from an SD memory card 1 7 Insert the SD memory card with the CAC FILE downloaded from our support website. recorded in memory on the unit. If “EMPTY” is selected in MEM STORE NO: EMPTY/1/ 2 --- at this time, data are recorded in available space of the CAC FILE numbers on the unit. If “1” is selected, the data will overwrite the contents of CAC FILE No. 1. For downloading, refer to the following URL. http://pro-av.
PAGE 106
AJ-HPX3100G(VQT3A79)_E.book 106 ページ２０１０年９月１７日金曜日午後９時２１分 To delete the CAC FILE from the unit 1 Open from the MAINTENANCE page using the menu operation. To delete the CAC FILE from the SD memory card 1 The following screen is displayed. The following screen is displayed. # < CAC FILE CARD READ > < CAC ADJ > # 2 3 4 5 Open from the FILE page using the menu operation.
PAGE 107
AJ-HPX3100G(VQT3A79)_E.book 107 ページ２０１０年９月１７日金曜日午後９時２１分 If the following messages are displayed when the JOG dial button is pressed, the data cannot be deleted. Error message Measures DELETE NG Insert an SD memory card. NO CARD (No SD memory card is inserted) DELETE NG ERROR (Data cannot be deleted) It is assumed that the SD memory card is defective. Replace the card. DELETE NG Eject the SD memory card and WRITE PROTECT release write protection.
PAGE 108
AJ-HPX3100G(VQT3A79)_E.book 108 ページ２０１０年９月１７日金曜日午後９時２１分 Preparation Power Supply A battery pack or an external DC power supply can be used as AJ-HPX3100’s power supply. Using a Battery Pack Battery packs from the following manufacturers can be used: • Anton/Bauer • IDX The type of the battery can be checked or changed through the viewfinder or menu screen on the monitor.
PAGE 109
AJ-HPX3100G(VQT3A79)_E.book 109 ページ２０１０年９月１７日金曜日午後９時２１分 Mounting the Battery and Setting the Battery Type Using an Anton/Bauer Battery Pack 1 Mount the Anton/Bauer battery pack. When using a V-mount type battery pack Mount the V-mount adapter plate. 2 Setting the battery type. Preparation 1 Anton/Bauer Battery Pack Insert the battery and slide it in the direction of the arrow.
PAGE 110
AJ-HPX3100G(VQT3A79)_E.book 110 ページ２０１０年９月１７日金曜日午後９時２１分 Use of the external DC power supply 1 Connect the external DC power supply to the DC IN socket on the unit. DC IN Socket External DC power supply 2 Turn “ON” the power switch of the external DC power supply. (If the power switch is available on the external DC power supply) 3 Turn ON the POWER switch on the unit. Inrush current is generated when the power of the unit is turned on.
PAGE 111
AJ-HPX3100G(VQT3A79)_E.book 111 ページ２０１０年９月１７日金曜日午後９時２１分 Mounting the Lens and Performing the Flange Back and White Shading Adjustments Mounting the Lens 1 Adjusting the Lens Flange Back Raise the lens clamping lever and remove the mount cap. Lens Clamping Lever If images are not clearly focused at both telephoto and wideangle positions during zoom operations, adjust the flange back (distance from the lens mounting surface to the image formation surface).
PAGE 112
AJ-HPX3100G(VQT3A79)_E.book 112 ページ２０１０年９月１７日金曜日午後９時２１分 8 Repeat Steps 5 to 7 until the lens is in focus at both the telephoto and wide-angle positions. 9 Firmly tighten the F.f ring clamping screw. Check that the lens aperture is between F4 and F11. Adjusting the Lens White Shading Notes Method to correct the waveform to be more flat by combining the sawtooth-shaped waveform and the parabola waveform when watching the respective waveforms of R, G and B of the video signals.
PAGE 113
AJ-HPX3100G(VQT3A79)_E.book 113 ページ２０１０年９月１７日金曜日午後９時２１分 11 When the lens has an extender, repeat steps 7 - 9 to enable the extender function. The camera-recorder stores, as one lens file data item, two different correction values for the following: a lens with an extender, a lens with no extender. When making the white shading correction, make the adjustment while observing the R, G, and B waveforms in the horizontal and vertical directions with the waveform monitor.
PAGE 114
AJ-HPX3100G(VQT3A79)_E.book 114 ページ２０１０年９月１７日金曜日午後９時２１分 Preparing for Audio Input Take the following steps to prepare the camera for connecting audio input devices. When Using the Front Microphone AJ-HPX3100 can be equipped with the AJ-MC900G stereo microphone kit (an extra-cost option). 1 3 Open the microphone holder. Connect the microphone cable to the MIC IN jack on the camera. MIC IN Jack 4 2 Mount the microphone and tighten the clamping screw.
PAGE 115
AJ-HPX3100G(VQT3A79)_E.book 115 ページ２０１０年９月１７日金曜日午後９時２１分 When Using Audio Devices 1 Connect the audio device to the AUDIO IN jack with the XLR cable. 2 Set the AUDIO IN switch to [REAR] for the channel to which the XLR cable is connected. 3 Set the LINE/MIC selector switch on the rear panel to [LINE].
PAGE 116
AJ-HPX3100G(VQT3A79)_E.book 116 ページ２０１０年９月１７日金曜日午後９時２１分 Attaching the Shoulder Strap To detach the shoulder strap, first open the hooks, then detach the strap. Shoulder Strap Note Make sure that the shoulder strap is securely attached. Press to open the hook.
PAGE 117
AJ-HPX3100G(VQT3A79)_E.book 117 ページ２０１０年９月１７日金曜日午後９時２１分 Attaching the F.AUDIO LEVEL control Knob If you use the F.Audio Level control frequently, attach the accessory knob so that it can be easily operated. F.Audio Level Control Remove the screw in the center of the F.Audio Level control, and attach the accessory knob using the screw (included). When attaching the knob, be sure to align the marks on the control with the marks on the knob.
PAGE 118
AJ-HPX3100G(VQT3A79)_E.book 118 ページ２０１０年９月１７日金曜日午後９時２１分 Manipulating Clips with Thumbnails A clip is a data group that includes the images and voices created from one shooting session, together with additional information such as text memos and meta data. The following manipulations can be performed using the cursor and SET buttons, while checking the images displayed on the LCD monitor: z Playback, delete, copy or restore the clip. z Add or delete a shot mark and a text memo on the clip thumbnail.
PAGE 119
AJ-HPX3100G(VQT3A79)_E.book 119 ページ２０１０年９月１７日金曜日午後９時２１分 Thumbnail Screen Press the THUMBNAIL button to display the thumbnail screen on the LCD monitor. Pressing the THUMBNAIL button again returns the display to the regular display. When switching is done from the regular screen display to the thumbnail screen display, all the clips will be displayed on the thumbnail screen. Pressing the MENU button allows you to navigate the thumbnail menu.
PAGE 120
AJ-HPX3100G(VQT3A79)_E.book 120 ページ２０１０年９月１７日金曜日午後９時２１分 8. Clip Number The numbers set by the camera for all the clips recognised correctly by the P2 card. These numbers are allocated in chronological order, by shooting dates and times. If clips cannot be played because of different recording formats, they are displayed in red. 9. Defective Clip Indicator and Unknown Clip indicator This marker is displayed for defective clips, which may result from a variety of causes, e.g.
PAGE 121
AJ-HPX3100G(VQT3A79)_E.book 121 ページ２０１０年９月１７日金曜日午後９時２１分 Selecting Thumbnails Playing back Clips Multiple thumbnails can be randomly selected in the thumbnail screen. 1 2 1 Press the THUMBNAIL button. The thumbnail screen appears on the LCD monitor. Use the cursor buttons to move the pointer (yellow frame) to the desired clip and press the SET button. 2 Use the cursor buttons to move the pointer over the desired clip. The frame around the selected thumbnail changes to a blue frame.
PAGE 122
AJ-HPX3100G(VQT3A79)_E.book 122 ページ２０１０年９月１７日金曜日 Switching the Thumbnail Display The display can be switched so that only those clips matching the specified conditions are displayed in the thumbnail screen. 1 午後９時２１分 3 Select THUMBNAIL from the thumbnail menu. Switch the thumbnail display by selecting one of the following items: Press the THUMBNAIL button. The thumbnail screen appears on the LCD monitor. 2 Press the THUMBNAIL MENU button. The thumbnail menu appears.
PAGE 123
AJ-HPX3100G(VQT3A79)_E.book 123 ページ２０１０年９月１７日金曜日午後９時２１分 Changing Thumbnails Shot Mark It is possible to replace thumbnails with images that include previously attached text memos while images are recorded or played back. 1 Add text memos to images that you intend to change. Refer to [Text Memo Function] (page 45) for the method to add text memos. 2 Select THUMBNAIL > TEXT MEMO CLIPS to display thumbnails of the clips with text memos.
PAGE 124
AJ-HPX3100G(VQT3A79)_E.book 124 ページ２０１０年９月１７日金曜日午後９時２１分 Text Memo During recording or playback, you can add text memos to clips. Text memos can be used to play back clips at some point or break clips into chunks and copy the necessary portions. Adding a text memo Playing back a clip at the position where a text memo is recorded 1 Press the THUMBNAIL button. The thumbnail screen appears on the LCD monitor. 2 Text memos can be added in one of the following ways.
PAGE 125
AJ-HPX3100G(VQT3A79)_E.book 125 ページ 4 ２０１０年９月１７日金曜日午後９時２１分 With the pointer located in the lower part, move the pointer to the desired text memo number using the cursor right and left buttons ("!). Then, press the PLAY button. Note z Pressing the REC button in the text memo screen will not start recording. z For AVC-Intra format clips that cannot be played back, text memo thumbnails cannot be displayed, and may be shown as a icon.
PAGE 126
AJ-HPX3100G(VQT3A79)_E.book 126 ページ２０１０年９月１７日金曜日午後９時２１分 Deleting Clips 1 Press the THUMBNAIL button. The thumbnail screen appears on the LCD monitor. 2 Use the cursor buttons to move the pointer over the clip you want to delete and press the SET button to select the clip. 3 Press the THUMBNAIL MENU button and select OPERATION > DELETE from the thumbnail menu. 4 The following screen appears. Use the cursor buttons and the SET button to select YES.
PAGE 127
AJ-HPX3100G(VQT3A79)_E.book 127 ページ２０１０年９月１７日金曜日午後９時２１分 Reconnection of Incomplete Clips Incomplete clips may be generated when clips recorded on multiple P2 cards (connected clips) are separately copied to different cards. Reconnection function generates one clip (the original, connected clip) from incomplete clips. 1 3 Press the THUMBNAIL MENU button and select OPERATION > COPY from the thumbnail menu. z Select Slot 1-2 or SD memory card as the destination. Press the THUMBNAIL button.
PAGE 128
AJ-HPX3100G(VQT3A79)_E.book 128 ページ２０１０年９月１７日金曜日午後９時２１分 Setting of Clip Meta Data Information such as the name of person who shot the video, the name of the reporter, the shooting location, or a text memo can be read from the SD memory card, and can be recorded as Clip Meta Data. Reading Clip Meta Data (metadata upload) Clip Meta Data items Clip Meta Data includes the following items: Underlined items can be set by reading the metadata upload file on the SD memory card.
PAGE 129
AJ-HPX3100G(VQT3A79)_E.book 129 ページ２０１０年９月１７日金曜日午後９時２１分 THUMBNAIL: Displays the location of the frame (frame offset) and the size (height and width) of the image selected as the thumbnail image. *1 The USER CLIP NAME recording method is selectable. For details, refer to [Selecting the USER CLIP NAME recording method] (page 130). *2 Be sure to enter TEXT when entering MEMO. It is not possible to record only PERSON or OFFSET.
PAGE 130
AJ-HPX3100G(VQT3A79)_E.book 130 ページ２０１０年９月１７日金曜日午後９時２１分 Selecting the USER CLIP NAME recording method Example of recording (DVCPRO HD) a clip on one P2 card: REC start Select META DATA > USER CLIP NAME from the thumbnail menu to select the recording method. Two options are available: TYPE1 and TYPE2.
PAGE 131
AJ-HPX3100G(VQT3A79)_E.book 131 ページ２０１０年９月１７日金曜日午後９時２１分 Formatting a P2 Card 1 Formatting SD memory cards Press the THUMBNAIL button. The thumbnail screen appears on the LCD monitor. 2 Press the THUMBNAIL MENU button and select OPERATION > FORMAT from thethumbnail menu. z When the screen shown below appears, select the slot number of the P2 card you want to format and press the SET button. z Select EXIT if formatting is not required. The following screen appears.
PAGE 132
AJ-HPX3100G(VQT3A79)_E.book 132 ページ２０１０年９月１７日金曜日午後９時２１分 Setting the Thumbnail Display Mode The thumbnail display mode can be customised to suit your preferences. 1 Press the THUMBNAIL button. The thumbnail screen appears on the LCD monitor. 2 Press the THUMBNAIL MENU button and select THUMBNAIL > SETUP from thethumbnail menu. The following screen appears.
PAGE 133
AJ-HPX3100G(VQT3A79)_E.book 133 ページ２０１０年９月１７日金曜日午後９時２１分 Properties 5. Clip Meta Data Displays more detailed data about the clip. Use the cursor buttons to move the pointer, and press the SET button to check the detailed content. The underlined items are automatically set during shooting. >[Setting of Clip Meta Data] (page 128) The clip’s properties and the P2 card’s status are displayed. It is possible to edit and rewrite recorded clip metadata while clip properties are displayed.
PAGE 134
AJ-HPX3100G(VQT3A79)_E.book 134 ページ２０１０年９月１７日金曜日午後９時２１分 Notes z Deleting only the respective items of LOCATION (recording location data) in SHOOT is not possible. By setting ALTITUDE to empty, other LONGITUDE/ LATITUDE items are collectively deleted. z The metadata for a clip with the incomplete clip indicator cannot be modified. For the clips recorded on multiple P2 cards, modify the metadata while all P2 cards are inserted. z Any MEMO with 101 characters or more cannot be modified.
PAGE 135
AJ-HPX3100G(VQT3A79)_E.book 135 ページ２０１０年９月１７日金曜日午後９時２１分 When “USED” is selected: 1 SD memory card Status Display 2 The status display enables a confirmation of the SD memory card formatted condition, available memory capacity etc. From the thumbnail menu, select PROPERTY > DEVICES > SD CARD. 3 5 4 1. Write-protect Mark mark appears if the P2 card is write-protected. 2.
PAGE 136
AJ-HPX3100G(VQT3A79)_E.book 136 ページ２０１０年９月１７日金曜日午後９時２１分 Connection with external device Connection with external devices using the USB 2.0 port Connection with a PC in the USB DEVICE mode By connecting AJ-HPX3100 with an external PC using USB 2.0, the P2 card connected to AJ-HPX3100 can be used as a mass storage device. Notes Procedures for establishing a connection with a PC 1 z A USB driver must be installed on the PC. z AJ-HPX3100 is only applicable to USB 2.0.
PAGE 137
AJ-HPX3100G(VQT3A79)_E.book 137 ページ２０１０年９月１７日金曜日午後９時２１分 USB HOST mode In this mode, it is possible to connect to a hard disk drive (HDD), store card data (EXPORT: Refer to "Writing data on a hard disk drive" (page 140)), view thumbnails of stored clips (EXPLORE: Refer to "Viewing hard disk drive information" (page 137)), and write data back to P2 cards (IMPORT: Refer to "Writing data back to P2 cards" (page 140)).
PAGE 138
AJ-HPX3100G(VQT3A79)_E.book 138 ページ２０１０年９月１７日金曜日 For Type S or P2 STORE 7 8 午後９時２１分 1. 9 PARTITION This section indicates the type of the hard disk drive. The available functions depend on the type of hard disk drive. HDD type 1 TYPE S 2 3 4 5 P2 STORE 6 Press the EXIT button.: ;Press the SET button. FAT OTHER 10 11 12 For the FAT Feature Available functions A special format that allows high-speed writing and writing back on a card-by-card basis.
PAGE 139
AJ-HPX3100G(VQT3A79)_E.book 139 ページ２０１０年９月１７日金曜日午後９時２１分 8. MODEL This section indicates the model of the P2 card that originally contained data on the partition. Note Press the cursor button (!) to switch to the PARTITION NAME. Press the cursor button (") button to return to the original model name display. Connection with external device 9. DATE/TIME This section indicates the date and time the data on the partition was recorded. 10.
PAGE 140
AJ-HPX3100G(VQT3A79)_E.book 140 ページ２０１０年９月１７日金曜日午後９時２１分 Writing data on a hard disk drive 1 Switch the mode to USB HOST. 2 Connect a hard disk drive via USB. > [Switching to the USB HOST mode] (page 137) A hard disk drive that has not been formatted with the camera-recorder must be formatted as directed in [Formatting a hard disk drive] (page 139). 3 4 Insert a P2 card. Press the THUMBNAIL button.
PAGE 141
AJ-HPX3100G(VQT3A79)_E.book 141 ページ 6 ２０１０年９月１７日金曜日午後９時２１分 Select YES. z This starts the write process. z When the writing is completed, the message “COPY COMPLETED!” is displayed. To disable verification during writing, select HDD > SETUP from the thumbnail menu and set the option VERIFY to OFF. This speeds up writing without verifying data writing.
PAGE 142
AJ-HPX3100G(VQT3A79)_E.book 142 ページ２０１０年９月１７日金曜日午後９時２１分 Connection using the SDI IN connector 1 Confirm that the connected device has the same signal format as camera-recorder. 2 When signals are input from the SDI IN connector, set the REC SIGNAL in the setting menu to “SDI”. The menu item REC SIGNAL is found in the screen on the SYSTEM SETTING page.
PAGE 143
AJ-HPX3100G(VQT3A79)_E.book 143 ページ２０１０年９月１７日金曜日午後９時２１分 Connection of the remote control unit (AJ-RC10G) It is possible to control some of the functions remotely by connecting the remote control unit AJ-RC10G (optional accessory). When AJ-RC10G is connected to the REMOTE connector on the unit and the power switches of both of the unit and AJ-RC10G are turned on, the unit automatically enters the remote control mode.
PAGE 144
AJ-HPX3100G(VQT3A79)_E.book 144 ページ２０１０年９月１７日金曜日午後９時２１分 Menu option GAMMA menu z The options available in GAMMA-MODE-SEL are as follows. HD, SD, F-LIKE1, F-LIKE2, F-LIKE3, FILM-REC, VIDEO REC z DYMC-LVL and BSR-LVL are added to the 4th layer. The variable ranges for these are as follows. DYMC-LVL: 200% - 600% BSR-LVL: 00% - 30% Note, however, that these values can only be changed when “FILM-REC” has been selected in GAMMAMODE-SEL. z V-KNSLP and V-KNPNT are added to the 5th layer.
PAGE 145
AJ-HPX3100G(VQT3A79)_E.book 145 ページ２０１０年９月１７日金曜日午後９時２１分 Connection of the extension control unit (AG-EC4G) It is possible to control some of the functions remotely by connecting the extension control unit AG-EC4G (optional accessory). When AG-EC4G is connected to the REMOTE connector on the unit and the power switches of both of the unit and AGEC4G are turned on, the unit automatically enters the remote control mode.
PAGE 146
AJ-HPX3100G(VQT3A79)_E.book 146 ページ２０１０年９月１７日金曜日午後９時２１分 Maintenance and Inspections Inspections Before Shooting Make sure you check that the system is operating normally before embarking on a shoot. We recommend using a color video monitor to check the image. Preparing for Inspections 1 2 3 Mount a charged battery pack. Turn the power switch ON and check that 5 or more BATT indication marks appear. Insert a P2 card into the slot cover and close the slide cover.
PAGE 147
AJ-HPX3100G(VQT3A79)_E.book 147 ページ２０１０年９月１７日金曜日午後９時２１分 Inspecting the Memory Recording Functions Make sure you successively carry out the inspections from [1. Inspecting the P2 Card Recording] to [4. Inspecting the Earphone and Speaker]. 3 1. Inspecting the P2 Card Recording 1 3. Inspecting the Audio Level Manual Adjustment > [P2 Card Remaining Free Space/capacity Indication] (page 83) 1 Set the AUDIO IN CH1 and CH2 switches to [FRONT]. Set the TCG switch to [R-RUN].
PAGE 148
AJ-HPX3100G(VQT3A79)_E.book 148 ページ２０１０年９月１７日金曜日午後９時２１分 6. Inspection of the clock, time code, and user bits 1 Set the user’s bit as required. 2 Set the time code. 5 Set the TCG switch to [F-RUN]. Check that the counter display number changes regardless of recording status. > [Setting of the User bits] (page 64) 7 > [Setting the Time Code] (page 67) 3 4 6 Set the DISPLAY switch to [UB]. Check that the counter display number changes as recording progresses.
PAGE 149
AJ-HPX3100G(VQT3A79)_E.book 149 ページ２０１０年９月１７日金曜日午後９時２１分 Connector Signals DC IN 1 GND 2 NC 3 NC 4 12V Panasonic part number K1AA104H0038 Maker part number HA16RX-4P (SW1) (Hirose Denki) 4 1 2 3 Note Panasonic part number K1AY104J0001 Maker part number HR10A-7R-4SC(73) (Hirose Denki) DC OUT 1 GND 2 R TALLY (Open collector) 3 REC START SW 4 12V OUT DC (11 V - 17 V) (Max. 1.
PAGE 150
AJ-HPX3100G(VQT3A79)_E.
PAGE 151
AJ-HPX3100G(VQT3A79)_E.book 151 ページ２０１０年９月１７日金曜日午後９時２１分 LENS 1 RET-SW ON/OFF of the return video RETURN ON: GND RETURN OFF: OPEN 2 REC-START/STOP Control for recording start/stop +5 V 0V Panasonic part number K1AY112JA001 Maker part number HR10A-10R-12SC(71) (Hirose Denki) 9 1 10 8 2 11 12 7 6 3 4 5 START STOP START GND GND 4 IRIS-AUTO ON/OFF of the forced iris servo SERVO ON: 5V±0.5V SERVO OFF: OPEN 5 IRIS-CONT Control output for the lens iris F2.8: –6.2 V, F16: 3.4 V, CLOSE: 2.
PAGE 152
AJ-HPX3100G(VQT3A79)_E.
PAGE 153
AJ-HPX3100G(VQT3A79)_E.book 153 ページ２０１０年９月１７日金曜日午後９時２１分 Warning System Warning Description Tables If a problem is detected immediately after the power is turned on, or during operation, this will be indicated by the WARNING lamp, lamps inside the viewfinder and a warning tone. Note The WARNING lamp has the highest priority, followed by the tally lamp, and then the warning tone. When multiple errors occur simultaneously a higher priority indication will be triggered. The [9.
PAGE 154
AJ-HPX3100G(VQT3A79)_E.book 154 ページ２０１０年９月１７日金曜日午後９時２１分 5. Image Sequence Error Display window indication “E-40” appears in the time code display field. WARNING lamp Blinks 4 times per second. Tally lamp 8. Number of Clips Exceeded Display window indication “00:00:00:11” appears in the time code display field. Even after recording is stopped, this display continues to blink until the next operation is performed. Blinks 4 times per second while recording continues.
PAGE 155
AJ-HPX3100G(VQT3A79)_E.book 155 ページ２０１０年９月１７日金曜日午後９時２１分 11. P2 Card Nearly Full 13. FAN STOP Display window indication One of the bars for remaining MEDIA capacity starts blinking. Display window indication No display. WARNING lamp Blinks once per second while recording continues. WARNING lamp Blinks 4 times per second. Blinks once per second while recording continues. Tally lamp No display. Tally lamp Viewfinder The FAN STOP indicator blinks while recording continues.
PAGE 156
AJ-HPX3100G(VQT3A79)_E.book 156 ページ２０１０年９月１７日金曜日午後９時２１分 Card Warning Code Code No. E-70 E-71 Description Indication in display window Recording The directory structure on the P2 card is not supported. ([DIR NG CARD (Slot No.)] is indicated on the viewfinder.) Operation continues. However, back up data on the P2 card as soon as possible, and format A warning code blinks once the card before using it again.
PAGE 157
AJ-HPX3100G(VQT3A79)_E.book 157 ページ Item HDD (USB HOST MODE) ２０１０年９月１７日 Message 金曜日午後９時２１分 Description Measure An error occurred during P2 card access. Check P2 card. CANNOT ACCESS TARGET! An error occurred during hard disk access. Check hard disk status and connection. CANNOT FORMAT! The hard disk cannot be initialized. Connect another hard disk drive. CANNOT RECOGNIZE HDD! The destination target cannot be properly recognized. Reboot the hard disk or connect a different hard disk.
PAGE 158
AJ-HPX3100G(VQT3A79)_E.book 158 ページ２０１０年９月１７日金曜日午後９時２１分 Menu Menu Configuration MENU USER MENU MAIN MENU SYSTEM SETTING RB GAIN CONTROL RGB BLACK CONTROL MATRIX COLOR CORRECTION LOW SETTING MID SETTING HIGH SETTING ADDITIONAL DTL SKIN TONE DTL KNEE/LEVEL GAMMA CAMERA SETTING PAINT OPTION MENU OPTION AREA SETTING VF CAM OPERATION CAMERA ID SHUTTER SPEED SHUTTER SELECT USER SW SW MODE WHITE BALANCE MODE USER SW GAIN LENS/IRIS Opening the Menus USER MENU: Displayed when the MENU button is pressed.
PAGE 159
AJ-HPX3100G(VQT3A79)_E.book 159 ページ２０１０年９月１７日金曜日午後９時２１分 USER MENU: USER MENU is factory-set. The menu can be LIGHT button configured to suit your preferences by specifying each option according to your purposes and frequency of use, through the screen, which is accessible from the MAIN MENU page. >[Selecting Options for USER MENU] (page 161). To display USER MENU, press the MENU button. MAIN MENU: Allows you to set all options on the settings menu.
PAGE 160
AJ-HPX3100G(VQT3A79)_E.book 160 ページ２０１０年９月１７日金曜日午後９時２１分 Setting Menu Options The menu options are set with the MENU and JOG dial buttons. The menu comprises main menu, sub-menus and options menus. The data specified through menu options are written and saved in the internal memory of the unit. This section describes how to set options in MAIN MENU. The other menus can be configured in the same manner (the method of displaying the menu screen depends on the particular menu).
PAGE 161
AJ-HPX3100G(VQT3A79)_E.book 161 ページ 6 ２０１０年９月１７日金曜日午後９時２１分 Press the JOG dial button. z The value stops blinking and is accepted. z To change the settings for other options on the same page, repeat Steps 4 - 6. 7 When the settings are finalised, press the MENU button.
PAGE 162
AJ-HPX3100G(VQT3A79)_E.book 162 ページ２０１０年９月１７日金曜日午後９時２１分 Menu Description Tables SYSTEM SETTING The ____ in the Adjustable Range column indicates the preset mode. SYSTEM MODE Items/ Adjustable Data Saved Range SYSTEM MODE 1080-59.94i 1080-50i 480-59.94i 576-50i – C U F – REC SIGNAL CAM SDI – C U F – REC FORMAT 1080-59.94i: DVCPROHD/60i AVC-I100/60i AVC-I100/30PN AVC-I100/24PN AVC-I50/60i AVC-I50/30PN AVC-I50/24PN 1080-50i: DVCPROHD/50i AVC-I100/50i AVC-I100/25PN AVC-I50/50i AVC-I50/25PN 480-59.
PAGE 163
AJ-HPX3100G(VQT3A79)_E.book 163 ページ Items/ Adjustable Data Saved Range PC MODE SELECT USB HOST USB DEV. – – – F – PC MODE ON OFF 金曜日午後９時２１分 Remarks Specify the operation mode of the camera-recorder when an external device is connected via USB. USB HOST: Sets the camera-recorder to the mode that allows an external hard disk drive to be connected. USB DEV.: Sets the camera-recorder to the USB device mode, which allows a PC to be connected via USB 2.0 for use with P2 cards as mass storage.
PAGE 164
AJ-HPX3100G(VQT3A79)_E.book 164 ページ２０１０年９月１７日金曜日午後９時２１分 REC FUNCTION Items/ Adjustable Data Saved Range INTERVAL REC MODE OFF ON ONE SHOT – C U F – INTERVAL REC HOLD Sets INTERVAL REC function. OFF: INTERVAL REC is not performed. ON: Uses internal memory to perform interval recording. ONE SHOT: Performs “one-shot” recording for the duration specified under REC TIME, and then stops. Note This item cannot be changed when “ON” is selected for the LOOP REC MODE item or for the ONE CLIP REC MODE item.
PAGE 165
AJ-HPX3100G(VQT3A79)_E.book 165 ページ Items/ Adjustable Data Saved Range ONE CLIP REC MODE ON OFF – C U F – ２０１０年９月１７日金曜日午後９時２１分 Remarks Select the ONE CLIP REC mode. ON: Operate in ONE CLIP REC mode. OFF: Do not operate in ONE CLIP REC mode. Note This item cannot be changed in the following cases. z When “ON” or “ONE SHOT” is selected for the INTERVAL REC MODE item. z When “ON” is selected for the LOOP REC MODE item.
PAGE 166
AJ-HPX3100G(VQT3A79)_E.book 166 ページ２０１０年９月１７日 Adjustable Items/ Range Data Saved SAFETY MARK OFF 1 2 金曜日午後９時２１分 Remarks Select the frame type for the safety zone marker. OFF: Do not display frame. 1: Box Items/ Adjustable Data Saved Range SAFETY AREA 80% : 90% : – C U F R 100% FRAME MARK ON OFF 2: Remarks For setting the size of the safety marker. It is possible to set the size by units of 1% with a fixed ratio between of width and height. Set the frame marker to “ON” or “OFF”.
PAGE 167
AJ-HPX3100G(VQT3A79)_E.book 167 ページ２０１０年９月１７日金曜日午後９時２１分 DOWNCON SETTING Items/ Adjustable Data Saved Range DOWNCON MODE SQUEEZE LT-BOX S-CROP – C U F R DETAIL ON OFF : 08 : Remarks For setting the mode of the down converter output signals. Note Part of the down converter output image at the top or bottom may be disrupted when “LT-BOX” is selected in this menu option, but this is not a malfunction. BRIGHTNESS –7 For setting the detail function for the down converter output signals ON/OFF.
PAGE 168
AJ-HPX3100G(VQT3A79)_E.book 168 ページ２０１０年９月１７日金曜日午後９時２１分 GENLOCK Items/ Adjustable Data Saved Range GENLOCK INT GL IN SDI IN Switch the camera synchronising signal. INT: Synchronise with the internal reference signal regardless of the reference signal input to the GENLOCK IN or SDI IN connector. GL IN: synchronizes with the reference signal input into the GENLOCK IN connector. SDI IN: synchronizes with the reference signal input into the SDI IN connector.
PAGE 169
AJ-HPX3100G(VQT3A79)_E.book 169 ページ２０１０年９月１７日金曜日午後９時２１分 PAINT The ____ in the Adjustable Range column indicates the preset mode. RB GAIN CONTROL Items/ Adjustable Data Saved Range R GAIN AWB PRE * –200 : +000 : RGB BLACK CONTROL Remarks For setting the Rch gain when the WHITE BAL switch is in the PRST position. S C U F R +200 B GAIN AWB PRE * –200 : +000 : For setting the Bch gain when the WHITE BAL switch is in the PRST position.
PAGE 170
AJ-HPX3100G(VQT3A79)_E.book 170 ページ２０１０年９月１７日金曜日午後９時２１分 MATRIX COLOR CORRECTION Items/ Adjustable Data Saved Range MATRIX TABLE A B Remarks Items/ Adjustable Data Saved Range For selecting the color correction table for the linear matrix. R (SAT) For performing the linear matrix adjustment. (red/green) S C U F R +63 S C U F R MATRIX R-G –63 : +50 For performing the color saturation correction of red.
PAGE 171
AJ-HPX3100G(VQT3A79)_E.book 171 ページ２０１０年９月１７日金曜日午後９時２１分 LOW SETTING Adjustable Items/ Range Data Saved R (PHASE) –63 Remarks For performing the hue correction for red. : –01 : +00 For performing the hue correction between red and magenta. : –06 For performing the hue correction for magenta. : +00 For performing the hue correction between magenta and blue. +00 For performing the hue correction for blue. : +00 DTL CORING 00 : 04 H.DTL FREQ.
PAGE 172
AJ-HPX3100G(VQT3A79)_E.book 172 ページ２０１０年９月１７日金曜日午後９時２１分 z When shooting with the MASTER GAIN set to “–6dB” or “–3dB”, coloring phenomena may occur in portions of the video with high brightness. The coloring phenomena can be reduced by switching the OUTPUT/AUTO KNEE switch to [CAM/AUTO KNEE OFF], setting the MANUAL KNEE menu option of the screen to “ON”, and then changing the following menu options.
PAGE 173
AJ-HPX3100G(VQT3A79)_E.book 173 ページ２０１０年９月１７日金曜日午後９時２１分 HIGH SETTING Items/ Adjustable Data Saved Range MASTER GAIN –6dB : 12dB ADDITIONAL DTL Remarks Select the master gain from –6, –3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, or 30dB. 00 : 06 S C U F R For performing the horizontal detail correction level setting. S C U F – 63 00 : 10 For performing the vertical detail correction level setting. : 12 For performing the noise elimination level setting for detail.
PAGE 174
AJ-HPX3100G(VQT3A79)_E.book 174 ページ２０１０年９月１７日金曜日午後９時２１分 SKIN TONE DTL Items/ Adjustable Data Saved Range SKIN TONE OFF A DTL B AB S C U F R ZEBRA VF ON OFF S C U F R ZEBRA SDI ON OUT OFF S C U F R ZEBRA MONI For the setting to display the zebra pattern in the skin tone area displayed in the viewfinder screen. The zebra pattern is displayed when this item is turned “ON” and the screen is opened. The zebra pattern indicates the area which is selected in the SKIN TONE DTL item.
PAGE 175
AJ-HPX3100G(VQT3A79)_E.book 175 ページ２０１０年９月１７日金曜日午後９時２１分 GAMMA Items/ Adjustable Data Saved Range Remarks Items/ Adjustable Data Saved Range MASTER GAMMA S C U F R 107% Set the AUTO KNEE POINT position in 1% steps. This setting is enabled when the OUTPUT/AUTO KNEE selector switch is set to CAM/AUTO KNEE ON. A.KNEE LVL Set the AUTO KNEE LEVEL. R GAMMA A.KNEE POINT 80% : 93% : 100 : : Set the AUTO KNEE response speed. The smaller the setting value, the faster the response speed.
PAGE 176
AJ-HPX3100G(VQT3A79)_E.book 176 ページ２０１０年９月１７日金曜日午後９時２１分 CAMERA SETTING Adjustable Items/ Range Data Saved F-REC 200% DYNAMIC LVL 300% 400% 500% 600% S C U F R F-REC BLACK 00% : STR LVL 30% S C U F R Remarks For setting the dynamic range when GAMMA MODE SEL has been set to “FILM-REC”. When GAMMA MODE SEL has not been set to “FILM-REC”, this setting cannot be changed. For setting the amount of black stretch when GAMMA MODE SEL has been set to “FILM-REC”.
PAGE 177
AJ-HPX3100G(VQT3A79)_E.book 177 ページ２０１０年９月１７日金曜日午後９時２１分 VF The ____ in the Adjustable Range column indicates the preset mode. ZEBRA Pattern Display VF DISPLAY Items/ Adjustable Data Saved Range DISP CONDITION NORMAL: Display status constantly. HOLD: Display status only when the MARKER SEL, MODE CHK / MENU CANCEL switch is pulled. 1 2 3 Set the DISP MODE. Switch the camera’s Warning/Message indication.
PAGE 178
AJ-HPX3100G(VQT3A79)_E.book 178 ページ２０１０年９月１７日金曜日午後９時２１分 VF MARKER VF USER BOX Items/ Adjustable Data Saved Range TABLE Select the VF MARKER setting table. First, select table A or B, then set the items below for each table. USER BOX OFF 1 2 3 4 Switch the center mark. OFF: Do not display center mark.
PAGE 179
AJ-HPX3100G(VQT3A79)_E.book 179 ページ２０１０年９月１７日金曜日午後９時２１分 VF INDICATOR (1/3) Items/ Adjustable Data Saved Range EXTENDER VF INDICATOR (2/3) Remarks ON OFF For selecting ON or OFF for the extender display. COLOR TEMP ON OFF ON OFF Set the shutter speed indication to ON or OFF. CAC ON OFF Set the filter No. indication to ON or OFF. GAMMA MODE ON OFF ON OFF Set the AWB PRE/A/B indication to ON or OFF. DRS ON OFF For selecting ON/OFF of the gain currently selected, S.GAIN and DS.
PAGE 180
AJ-HPX3100G(VQT3A79)_E.book 180 ページ２０１０年９月１７日 Items/ Adjustable Data Saved Range SAVE LED OFF P2CARD – C U F R REC STATUS ON OFF – C U F R P-REC/i-REC ON OFF – C U F R 金曜日午後９時２１分 Remarks Set the SAVE lamp function. OFF: The lamp always stays off and not used. P2CARD: The lamp blinks in synch with the warning message when the P2 card’s remaining recording capacity is getting low. Select whether or not to enable “REC” indication in the viewfinder and on the LCD monitor during recording.
PAGE 181
AJ-HPX3100G(VQT3A79)_E.book 181 ページ２０１０年９月１７日金曜日午後９時２１分 CAM OPERATION The ____ in the Adjustable Range column indicates the preset mode. CAMERA ID Items/ Adjustable Data Saved Range SHUTTER SPEED Remarks Items/ Adjustable Data Saved Range ID1 ¢¢¢¢¢¢¢ Setting 1 for the CAMERA ID recorded on ¢¢¢ color bars. Up to 10 characters are allowed for this setting. – C U F – SYNCHRO SCAN ID2 POSITION1 ¢¢¢¢¢¢¢ Setting 2 for the CAMERA ID recorded on ¢¢¢ color bars.
PAGE 182
AJ-HPX3100G(VQT3A79)_E.book 182 ページ２０１０年９月１７日金曜日午後９時２１分 SHUTTER SELECT Items/ Adjustable Data Saved Range POSITION1 SEL Remarks For setting the shutter speed for POSITION 1. Items/ Adjustable Data Saved Range POSITION5 SEL 1/100 * 1/120 1/250 1/500 1/1000 1/2000 HALF 180.0deg 172.8deg 144.0deg 120.0deg 90.0deg – C U F – 45.0deg For setting the shutter speed for POSITION 2. POSITION6 SEL 1/100 * 1/120 1/250 1/500 1/1000 1/2000 HALF 180.0deg 172.8deg 144.0deg 120.0deg 90.0deg – C U F – 45.
PAGE 183
AJ-HPX3100G(VQT3A79)_E.book 183 ページ２０１０年９月１７日金曜日午後９時２１分 Items/ Adjustable Data Saved Range USER SW Items/ Adjustable Data Saved Range USER MAIN SW Remarks Allocate the USER MAIN button. For descriptions of the functions, see [Assigning Functions to USER Buttons] (page 55). USER1 SW INH S.GAIN DS.GAIN S.IRIS I.OVR S.BLK B.GAMMA D.ZOOM ATW ATW LOCK Y GET DRS ASSIST C.TEMP AUD CH1/3 AUD CH2/4 REC SW RET SW PRE REC SLOT SEL PC MODE – C U F R LCD B.L Allocate the USER1 button.
PAGE 184
AJ-HPX3100G(VQT3A79)_E.book 184 ページ２０１０年９月１７日金曜日午後９時２１分 WHITE BALANCE MODE Items/ Adjustable Data Saved Range S.BLK LVL Remarks OFF –10 –20 – C U F R –30 For setting the super black level. AUTO KNEE SW For selecting ON/OFF of the AUTO KNEE function and DRS function. When it is set to OFF, the AUTO KNEE may not function even if the AUTO KNEE switch is turned ON. When the DRS function is enabled and the AUTO KNEE switch is positioned to ON, the DRS function turns on. OFF ON DRS S C U F R SHD.
PAGE 185
AJ-HPX3100G(VQT3A79)_E.book 185 ページ２０１０年９月１７日金曜日午後９時２１分 USER SW GAIN Adjustable Items/ Range Data Saved COLOR TEMP 2300K; : PRE 3200K : 15000K: 3200K 5600K – – – F – : 3200K : 15000K: – – – F – AWB B TEMP 2300K; : 3200K : 15000K: – – – F – For setting the color temperature when the WHITE BAL switch is set to the PRST position. The PRESET color temperature selected in TEMP PRE SEL SW is set. 2300K; - 15000K:: When VAR was selected in TEMP PRE SEL SW.
PAGE 186
AJ-HPX3100G(VQT3A79)_E.book 186 ページ２０１０年９月１７日金曜日午後９時２１分 LENS/IRIS Items/ Adjustable Data Saved Range A.IRIS LEVEL 000 Remarks Set the target value for auto iris. : 045 : – C U F R 100 A.IRIS PEAK/ 000 : AVE 030 : 100 – C U F R A.IRIS WINDOW NORM1 NORM2 CENTR – C U F R S.IRIS LEVEL 000 : 080 Determine the peak-to-standard ratio for the auto iris.
PAGE 187
AJ-HPX3100G(VQT3A79)_E.book 187 ページ２０１０年９月１７日金曜日午後９時２１分 MAIN OPERATION The ____ in the Adjustable Range column indicates the preset mode. BATTERY/P2CARD Items/ Adjustable Data Saved Range BATTERY SELECT HYTRON140 DIONIC90 DIONIC160 ENDURA10 PAG L95 TYPE A TYPE B TYPE C Select the battery to use. Batteryremaining detection matched to the battery is performed when HYTRON 140, DIONIC 90, or DIONIC 160 from Anton/ Bauer, ENDURA 10 (E-10) from IDX, or PAG L95 from PAG is selected.
PAGE 188
AJ-HPX3100G(VQT3A79)_E.book 188 ページ２０１０年９月１７日金曜日午後９時２１分 BATTERY SETTING (1/2) Items/ Adjustable Data Saved Range HYTRON140 ¢ • AUTO MANUAL 11.0 : 13.5 : BATTERY SETTING (2/2) Remarks Enable selection under BATTERY SELECT. ¢:Enable selection. •: Disable selection. Select auto or manual to set the NEAR END voltage. AUTO: Set voltage automatically. MANUAL: Set voltage manually. When MANUAL is selected in the menu above, set the NEAR END voltage in 0.1 V steps.
PAGE 189
AJ-HPX3100G(VQT3A79)_E.book 189 ページ２０１０年９月１７日金曜日午後９時２１分 MIC/AUDIO (1/3) Items/ Adjustable Data Saved Range VR SELECT CH1/2 CH3/4 – C U F – FRONT VR CH1 (CH3) – C U F – FRONT VR CH2 (CH4) OFF FRONT W.L. REAR ALL – C U F – AUTO LVL CH3 ON OFF (CH1) – C U F – AUTO LVL CH4 ON OFF (CH2) – C U F – Select the channels to assign to the AUDIO LEVEL controls and F.AUDIO LEVEL control. CH1/2: Assign level adjustments for channels 1/2.
PAGE 190
AJ-HPX3100G(VQT3A79)_E.book 190 ページ２０１０年９月１７日金曜日午後９時２１分 MIC/AUDIO (2/3) Items/ Adjustable Data Saved Range MIC LOWCUT OFF FRONT CH1 W.L. REAR – C U F – MIC LOWCUT OFF FRONT CH2 W.L. REAR – C U F – MIC LOWCUT OFF FRONT CH3 W.L. REAR – C U F – MIC LOWCUT OFF FRONT CH4 W.L. REAR – C U F – LIMITER CH1 ON OFF – C U F – LIMITER CH2 ON OFF – C U F – LIMITER CH3 ON OFF – C U F – LIMITER CH4 ON OFF – C U F – 190 Remarks Select the microphone low cut filter for Input Channel 1.
PAGE 191
AJ-HPX3100G(VQT3A79)_E.book 191 ページ２０１０年９月１７日金曜日午後９時２１分 MIC/AUDIO (3/3) Items/ Adjustable Data Saved Range FRONT MIC POWER TC/UB Remarks ON OFF Select the phantom power supply for the front microphone. ON OFF Select the phantom power supply for the rear microphone. When OFF is selected, no phantom power is supplied even if the REAR AUDIO CH1 or CH2 switch is set to +48 V. Items/ Adjustable Data Saved Range TC MODE Set the time code mode. DF: Drop frame. NDF: Non drop frame.
PAGE 192
AJ-HPX3100G(VQT3A79)_E.book 192 ページ２０１０年９月１７日 Adjustable Items/ Range Data Saved VITC UB MODE USER/EXT TIME DATE TCG FRM RATE REGEN 金曜日午後９時２１分 Remarks Select the user bits mode for VITC. USER/EXT: If UB MODE is set to EXT, the EXT value is recorded. If not, USER value set by UB is recorded. TIME: Select local time (hours, minutes, seconds). DATE: Select local date and time (2 last digits of year, month, date, time). TCG: TCG value enters UB.
PAGE 193
AJ-HPX3100G(VQT3A79)_E.book 193 ページ２０１０年９月１７日金曜日午後９時２１分 FILE The ____ in the Adjustable Range column indicates the preset mode. SD CARD READ/WRITE Items/ Adjustable Data Saved Range R.SELECT 1 : – – – F – 8 READ SD CARD R/W SELECT Remarks Select the file number to read out. Read out the data from the SD memory card. – – – – – W.SELECT 1 : – – – F – 8 WRITE Select the file number to write in. Write the camera-recorder’s menu data to the SD memory card. – – – – – Format the SD memory card.
PAGE 194
AJ-HPX3100G(VQT3A79)_E.book 194 ページ２０１０年９月１７日金曜日午後９時２１分 CAC FILE CARD READ Items/ Adjustable Data Saved Range CARD FILE SELECT 1 : 32 – – – F – READ LENS FILE Remarks For selecting the number for performing the color astigmatism correction data operation (READ/DELETE) that is recorded on the SD memory card. For reading the CAC FILE from the SD memory card. When this is selected, the display moves to the FILE READ screen.
PAGE 195
AJ-HPX3100G(VQT3A79)_E.book 195 ページ２０１０年９月１７日金曜日午後９時２１分 SCENE Items/ Adjustable Data Saved Range READ USER DATA INITIALIZE Remarks Read out the data from the user area in the memory. – – – – – SCENE SEL 1 : – – – F – 4 Select the scene file. READ Read the scene file. – – – – – WRITE Write the scene file. – – – – – RESET READ FACTORY DATA Remarks – – – – – The menu (MAIN MENU, OPTION MENU) values are all reset to factory settings.
PAGE 196
AJ-HPX3100G(VQT3A79)_E.book 196 ページ２０１０年９月１７日金曜日午後９時２１分 MAINTENANCE The ____ in the Adjustable Range column indicates the preset mode. SYSTEM CHECK Items/ Adjustable Data Saved Range COLOR CHECK ON OFF – – – – – LENS FILE ADJ Remarks ON/OFF switching for checking proper operation of the camera-recorder.
PAGE 197
AJ-HPX3100G(VQT3A79)_E.book 197 ページ２０１０年９月１７日金曜日午後９時２１分 CAC ADJ DIAGNOSTIC (3/3) Items/ Adjustable Data Saved Range CAC CONTROL ON: The color astigmatism correction is performed. OFF: The color astigmatism correction is not performed. SYSCON SOFT - The color astigmatism correction file that is recorded in built-in memory of the unit and selected in the CAC FILE No item is deleted. LCD SOFT – – – – – CAC FILE NO.
PAGE 198
AJ-HPX3100G(VQT3A79)_E.book 198 ページ２０１０年９月１７日金曜日午後９時２１分 OPTION MENU The ____ in the Adjustable Range column indicates the preset mode. OPTION AREA SETTING Items/ Adjustable Data Saved Range ENG SECURITY ON OFF – – – – – FRAME RATE FRM RATE MENU UB – C – – – FAN MODE – – – – – 198 OFF AUTO Remarks Items/ Adjustable Data Saved Range Select whether or not to prohibit opening the menu screen. ON: Menu screen cannot be opened. Please consult your distributor to release the setting.
PAGE 199
AJ-HPX3100G(VQT3A79)_E.book 199 ページ２０１０年９月１７日金曜日午後９時２１分 Updating the Firmware incorporated into the unit The firmware can be updated using either of the following two methods. 1. Checking the current version of firmware and performing the update using the dedicated tool (P2_Status_Logger) PASS (P2 Asset Support System) is only available to customers who have completed customer registration with Panasonic.
PAGE 200
AJ-HPX3100G(VQT3A79)_E.book 200 ページ２０１０年９月１７日金曜日午後９時２１分 Specifications General Operating humidity: Power supply: DC 12 V (11.0 V - 17.0 V) Power consumption: 34 W (main unit only) indicates safety information. Operating temperature: 0 °C to 40 °C (32 °F to 104 °F) Storage temperature: –20 °C to 60 °C (–4 °F to 140 °F) 10% to 85% (relative humidity) Maximum continuous operation: Approximately 150 minutes (using an Anton/Bauer DIONIC90 battery) Dimensions (W a H a D): 140 mm a 270.5 mm a 335.
PAGE 201
AJ-HPX3100G(VQT3A79)_E.book 201 ページ２０１０年９月１７日金曜日午後９時２１分 Memory Card Unit Digital Video System Frequency range: Y: 74.1758 MHz (59.94 Hz) 74.2500 MHz (50 Hz) (AVC-Intra100/DVCPRO HD) PB/PR: 37.0879 MHz (59.94 Hz) 37.1250 MHz (50 Hz) (AVC-Intra100/DVCPRO HD) Y: 13.5 MHz (DVCPRO50) PB/PR: 6.75 MHz (DVCPRO50) Y: 13.5 MHz (DVCPRO) PB/PR: 3.375 MHz (DVCPRO) Quantization: 10 bits (AVC-Intra100/AVC-Intra50) 8 bits (DVCPRO HD/DVCPRO50/ DVCPRO/DV) Compression method: MPEG-4 AVC/H.
PAGE 202
AJ-HPX3100G(VQT3A79)_E.book 202 ページ２０１０年９月１７日金曜日午後９時２１分 Input/output Unit GENLOCK IN: SDI OUT : MON OUT: TC IN: TC OUT: SDI-IN : BNCa1, 1.0 V [p-p], 75 h (This is available as the return video input connector, which can be switched in the menu.) BNCa1 HD: 0.8 V [p-p], 75 h (Compliant with the SMPTE292M/299M standards) SD: 0.8 V [p-p], 75 h (Compliant with the SMPTE259M-C/272M-A/ ITU-R. BT656-4 standards) BNCa1 (It can be switched among HD-SDI/SDSDI/Composite.) HD: 0.8 V [p-p], 75 h SD: 0.
PAGE 203
AJ-HPX3100G(VQT3A79)_E.book 203 ページ２０１０年９月１７日金曜日午後９時２１分 Information on software for this product 1.Included with this product is software licensed under the GNU General Public License (GPL) and GNU Lesser General Public License (LGPL), and users are hereby informed that they have the right to obtain, change and redistribute the source codes of this software. To obtain the source codes, go to the following home page: http://pro-av.panasonic.
PAGE 204
AJ-HPX3100G(VQT3A79)_E.book 204 ページ２０１０年９月１７日金曜日午後９時２１分 Index Symbols MENU !LED ..................................................................... 180 Numerics MENU 01 - 32 .......................................................... 194, 197 MENU 25M REC CH SEL................................................ 190 MENU 2D LPF .........................................................
PAGE 205
AJ-HPX3100G(VQT3A79)_E.book 205 ページ２０１０年９月１７日金曜日午後９時２１分 MENU DOWNCON MODE ............................................. 167 MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU DRS ....................................................................... 55 DRS ..................................................................... 179 DRS EFFECT DEPTH......................................... 175 DRS MODE ......................................................... 175 DS.GAIN.................................
PAGE 206
AJ-HPX3100G(VQT3A79)_E.book 206 ページ MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU MENU ２０１０年９月１７日金曜日午後９時２１分 MATRIX................................................................ 180 MATRIX B-G ........................................................ 170 MATRIX B-R ........................................................ 170 MATRIX G-B ........................................................ 170 MATRIX G-R .......................................
PAGE 207
AJ-HPX3100G(VQT3A79)_E.book 207 ページ２０１０年９月１７日金曜日午後９時２１分 MENU SAFETY MARK ........................................... 166, 178 MENU SAVE LED ........................................................... 180 MENU SCAN REVERSE ................................................ 162 Scene File.............................................................. 96 MENU SCENE SEL ........................................................
PAGE 208
AJ-HPX3100G(VQT3A79)_E.book 210 ページ２０１０年９月１７日金曜日午後９時２１分 Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.