Camcorder Menu Information

ManualsBrandsPanasonic ManualsCamcorderAJ-HDC27HP

Panasonic Broadcast

AJ-HDC27HP

Menu Information

Summary of content (41 pages)

PAGE 1
Panasonic Broadcast AJ-HDC27HP Menu Information
PAGE 2
02. 英(P26-88) 05.5.18 10:42 ページ86 Menu operations The setting menu operations are performed using the MENU button and JOG dial button. The menu configuration is divided into the camera unit’s setting menus and VTR unit’s setting menus. It is possible to select the engineer menu which enables all the setting menu items to be set or, alternatively, the user menu which consists of individually tailored menus so that only those menus which will be used most frequently can be set.
PAGE 3
02. 英(P26-88) 05.5.18 10:42 ページ87 Menu operations (continued) Basic setting menu operations Displaying menus User menu: Engineer menu the MENU button. 1 Press The camera unit’s USER menu screen is down 1 Hold seconds. the MENU button for at least 3 displayed. the MENU button is pressed again, the VTR 2 When unit’s USER menu screen is displayed. the JOG dial button is pressed, the next 2 When MAIN menu screen (of the camera unit) is displayed.
PAGE 4
02. 英(P26-88) 05.5.18 10:42 ページ88 Menu operations (continued) Displaying sub-menus and deciding on settings Operations common to the user menu and engineer menu the JOG dial button while the USER menu 1 Turn screen or MAIN menu screen is displayed. the JOG dial button to move the cursor to the 3 Turn desired item to be set, and press the JOG dial button. The digit whose value is to be set now flashes. Example: Press the JOG dial button. I The cursor (n) moves to the SUB menu item.
PAGE 5
03. 英(P89-127) MENU 05.5.18 10:44 ページ89 Setting menu configuration FILM (CAM) MAIN MENU 1 ROP MATRIX } MATRIX TABLE MATRIX R-G MATRIX R-B MATRIX G-R MATRIX G-B MATRIX B-R MATRIX B-G COLOR CORRECTION 1 COLOR CORRECTION 2 R-Mg Mg-B B-Cy Cy-G G-Yl Yl-R (SAT)/(PHASE) (SAT)/(PHASE) (SAT)/(PHASE) (SAT)/(PHASE) (SAT)/(PHASE) (SAT)/(PHASE) LOW SETTING MID SETTING } MASTER GAIN H. DTL LEVEL V. DTL LEVEL DTL CORING H. DTL FREQ LEVEL DEPEND.
PAGE 6
03. 英(P89-127) MENU 05.5.18 10:44 ページ90 Setting menu configuration (continued) FILM (CAM) MAIN MENU 2 VF DIAPLSY DISP CONDITION DISP MODE VF OUT VF DTL ZEBRA1 DETECT ZEBRA2 DETECT ZEBRA2 LOW LIGHT LVL SYNCHRO SCAN DISP. ECU MENU DISP.
PAGE 7
03. 英(P89-127) MENU 05.5.
PAGE 8
03. 英(P89-127) MENU 05.5.
PAGE 9
03. 英(P89-127) MENU 05.5.18 10:44 ページ93 Setting menu screens FILM (CAM) MENUS The main menu consists of FILM (CAM) MAIN MENU (1 to 4) of the camera and the VTR MAIN MENU of the VTR. These screens are index screens which are used to open the sub-menus. The setting menu is operated with the MENU button and JOG dial button. (Refer to pages 86 to 88 for the menu operations.) FILM (CAM) MAIN MENU 1 screen SUB menu VF display USER ENG Index for opening the ROP screen.
PAGE 10
03. 英(P89-127) MENU 05.5.18 10:44 ページ94 Setting menu screens FILM (CAM) MAIN MENU 1 ROP screen MATRIX screen The ROP (Remote Operation Panel) is set on this screen. The camera matrix is set on this screen. Item Variable range MASTER PED VF display Item Remarks –200 : (FILM MENU) +000 : (CAM MENU) +018 : +200 S C U F E (Max.) USER ENG MASTER DTL –31 : +00 : S C U F E +31 USER ENG MASTER GAMMA 0.35 : 0.45 : S C U F E 0.75 USER ENG R GAIN –200 : +000 : +200 S C U F E (Max.
PAGE 11
03. 英(P89-127) MENU 05.5.18 10:44 ページ95 Setting menu screens FILM (CAM) MAIN MENU 1 (continued) COLOR CORRECTION 1 screen COLOR CORRECTION 2 screen The camera color saturation adjustments and hue adjustments are set on this screen. The camera color saturation adjustments and hue adjustments are set on this screen.
PAGE 12
03. 英(P89-127) MENU 05.5.18 10:44 ページ96 Setting menu screens FILM (CAM) MAIN MENU 1 (continued) LOW SETTING screen MID SETTING screen The low level gain is set on this screen. The middle level gain is set on this screen. Item Variable range ∫ MASTER GAIN (FILM MENU) –3dB : 0dB : S C U F E 30dB VF display USER ENG Item –3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 18 dB, 24 dB or 30 dB can be set. ∫ MASTER GAIN (FILM MENU) –6dB, –3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 18 dB, 24 dB or 30 dB can be set.
PAGE 13
03. 英(P89-127) MENU 05.5.18 10:44 ページ97 Setting menu screens FILM (CAM) MAIN MENU 1 (continued) HIGH SETTING screen ∫ ADDITIONAL DTL 1 screen The high level gain is set on this screen. The special detail features of the camera are set on this screen. Item ∫ MASTER GAIN (FILM MENU) S C U F (CAM MENU) S C U F H. DTL LEVEL (FILM MENU) (CAM MENU) S C U F V. DTL LEVEL (FILM MENU) (CAM MENU) S C U F DTL CORING S C U F H.
PAGE 14
03. 英(P89-127) MENU 05.5.18 10:44 ページ98 Setting menu screens FILM (CAM) MAIN MENU 1 (continued) SKIN TONE DTL screen KNEE/LEVEL screen The skin tone detail of the camera is set on this screen. The knee settings of the camera are performed on this screen. Item Variable range VF display Remarks ∫ SKIN TONE DTL ON S C U F E OFF USER ENG For setting the skin tone detail to ON or OFF. ∫ SKIN TONE ZEBRA USER ENG For setting zebra in the skin tone range to ON or OFF.
PAGE 15
03. 英(P89-127) MENU 05.5.18 10:44 ページ99 Setting menu screens FILM (CAM) MAIN MENU 1 (continued) GAMMA screen ∫ CAMERA SETTING screen The gamma settings of the camera are performed on this screen. The basic settings of the camera are set to ON or OFF on this screen. Item Variable range VF display Remarks Item MASTER GAMMA (FILM MENU) 0.35 : 0.45 : S C U F E 0.75 USER ENG For setting the master gamma when the unit is to be operated in the film mode.
PAGE 16
03. 英(P89-127) MENU 05.5.18 10:44 ページ100 Setting menu screens FILM (CAM) MAIN MENU 2 VF DISPLAY screen The information to be displayed inside the viewfinder is set on this screen. Item DISP CONDITION Variable range NORMAL HOLD VF display USER ENG S C U F E DISP MODE 1 2 3 USER ENG S C U F E VF OUT Remarks Item NORMAL: The statuses are displayed at all times. HOLD: The statuses are displayed when MODE CHECK SW is ON.
PAGE 17
03. 英(P89-127) MENU 05.5.18 10:44 ページ101 Setting menu screens FILM (CAM) MAIN MENU 2 (continued) VF MARKER screen VF INDICATOR screen The information to be displayed inside the viewfinder is set on this screen. The information to be displayed inside the viewfinder is set on this screen. Item SAFETY ZONE Variable range OFF 1 : 3 : 12 VF display USER ENG S C U F E CENTER MARK ON OFF 4:3 13 : 9 14 : 9 VISTA S C U F E CNSCO MARK ON OFF For setting the center marker display to ON or OFF.
PAGE 18
03. 英(P89-127) MENU 05.5.18 10:44 ページ102 Setting menu screens FILM (CAM) MAIN MENU 2 (continued) CAMERA ID screen SHUTTER SPEED screen The camera ID is set on this screen. On this screen, the shutter speed to be used is selected from among the POSITION items each of which contains a shutter speed which was set on the SHUTTER SELECT screen. Variable range Item == ID 1: VF display ENG 2222222222 ID 2: 2222222222 ID 3: 2222222222 C U F E Remarks For inputting the camera ID (max. 10 characters).
PAGE 19
03. 英(P89-127) MENU 05.5.18 10:44 ページ103 Setting menu screens FILM (CAM) MAIN MENU 2 (continued) SHUTTER SELECT screen A shutter speed is set in each POSITION item on this screen. Item Variable range VF display Remarks SYNCHRO SCAN 2 90.0 deg : 180.0 deg : S C U F E 225.0 deg ENG For selecting the shutter speed which is to be set in SYNCHRO SCAN 2. POSITION 1 SEL (FILM MENU) 180.0 deg 172.8 deg 144.0 deg 120.0 deg 90.0 deg 45.
PAGE 20
03. 英(P89-127) MENU 05.5.18 10:44 ページ104 Setting menu screens FILM (CAM) MAIN MENU 2 (continued) ! LED screen CAMERA SW MODE screen The display of the lamp which appears inside the viewfinder is set to ON or OFF on this screen. The modes of the camera switches are set on this screen. Item GAIN (0 dB) Variable range VF display ON OFF USER ENG For setting whether the lamp is to be turned on when the gain level is other than 0 dB.
PAGE 21
03. 英(P89-127) MENU 05.5.23 2:19 PM ページ105 Setting menu screens FILM (CAM) MAIN MENU 2 (continued) CAMERA SW MODE screen Item USER1 SW (FILM MENU) (CAM MENU) Variable range INH S.GAIN S.IRIS S.BLK B.STR AUDIO CH1 AUDIO CH2 REC SW Y GET RET SW F.RATE VF display USER ENG S C U F E USER2 SW (CAM MENU) (FILM MENU) S C U F E INH S.GAIN S.IRIS S.BLK B.STR AUDIO CH1 AUDIO CH2 REC SW Y GET RET SW F.RATE USER ENG Remarks For allocating the functions in USER1 button. OWhen B.
PAGE 22
03. 英(P89-127) MENU 05.5.23 2:19 PM ページ106 Setting menu screens FILM (CAM) MAIN MENU 2 (continued) SUPER GAIN screen FRAME MODE screen The gain allocated to the SUPER GAIN switch is set on this screen. The frame rate is set on this screen. Item Item S. GAIN VALUE Variable range 18dB 24dB 30dB S C U F E 36dB VF display USER ENG Remarks For selecting the gain when the SUPER GAIN switch is pressed.
PAGE 23
03. 英(P89-127) MENU 05.5.23 2:19 PM ページ107 Setting menu screens FILM (CAM) MAIN MENU 3 CAM CARD READ/WRITE screen The settings for saving (writing) the menu data on the SD memory card, loading (reading) the data from the card, and configuring the card are performed on this screen. Variable range Item SELECT 1 : F E 8 VF display Remarks USER ENG For selecting the number of the file to be loaded. USER ENG For loading the data from the SD memory card.
PAGE 24
03. 英(P89-127) MENU 05.5.23 2:19 PM ページ108 Setting menu screens FILM (CAM) MAIN MENU 3 (continued) LENS FILE screen GENLOCK/IRIS screen The lens files are stored into the unit’s internal memory and read from the memory on this screen. The white shading data and flare adjustment data are stored together as a lens file. The genlock and iris control settings are performed on this screen.
PAGE 25
03. 英(P89-127) MENU 05.5.23 2:19 PM ページ109 Setting menu screens FILM (CAM) MAIN MENU 3 (continued) LENS ADJ screen The lens adjustments are performed on this screen. Item Variable range VF display Remarks F2.8 ADJ ON OFF ENG For outputting the voltage output only when ON is selected as this item’s setting. F16 ADJ ON OFF ENG For outputting the voltage output only when ON is selected as this item’s setting.
PAGE 26
03. 英(P89-127) MENU 05.5.23 2:19 PM ページ110 Setting menu screens FILM (CAM) MAIN MENU 4 FILM (CAM) USER MENU SELECT 1, 2 and 3 screens The settings for registering the items (the same as the ones on the FILM or CAM MAIN MENU 1, 2 and 3 screens) allocated to the SUB menus to the SUB MENU screen are performed on this screen. Registration ON (¢) or OFF (≥) is set at the head of each item. Up to 42 camera unit items can be registered.
PAGE 27
03. 英(P89-127) MENU 05.5.23 2:19 PM ページ111 Setting menu screens FILM (CAM) MAIN MENU 4 (continued) BLACK SHADING screen COLORIMETRY screen The black shading adjustments are performed on this screen. The luminance signal standard is selected on this screen. Variable range Item == DETECTION CORRECT (DIG) ON OFF S C U F E VF display Remarks ENG For execution of the digital shading compensation. ENG For setting the digital shading compensation to ON or OFF.
PAGE 28
03. 英(P89-127) MENU 05.5.23 2:19 PM ページ112 Setting menu screens FILM (CAM) MAIN MENU 4 (continued) DIAGNOSTIC screen OPTION screen The usage statuses and software versions are displayed on this screen. The engineer menu display is selected on this screen. Item Variable range VF display Item Remarks ENG SECURITY CAMSOFT (IN) == ENG For displaying the version of the software for the built-in flash memory.
PAGE 29
03. 英(P89-127) MENU 05.5.23 2:19 PM ページ113 Setting menu screens FILM (CAM) MAIN MENU 4 (continued) OPTION screen Item Variable range EVALUATION screen VF display Remarks SYSTEM FREQ. 59.94Hz U F E 60.00Hz ENG For setting the unit’s frame frequency. EVF SEL ENG The EVF terminal video signal will be switched. MONO: Only the Y signal is output to the EVF connecter. COLOR: The Y, Pb, and Pr signals are output to the EVF connecter. Currently there is no viewfinder to support this.
PAGE 30
03. 英(P89-127) MENU 05.5.18 10:44 ページ114 Setting menu screens FILM (CAM) MAIN MENU 4 (continued) OResolution measurement screen The resolution measurements are performed on this screen. Item Variable range VF display Remarks RESOLUTION ON ENG For setting the resolution measurement. DETAIL ON OFF ENG For setting the DETAIL to ON or OFF. H-F COMPE. ON OFF ENG For setting the highfrequency compensation to ON or OFF. GAMMA ON OFF ENG For setting the GAMMA to ON or OFF.
PAGE 31
03. 英(P89-127) MENU 05.5.18 10:44 ページ115 Setting menu screens VTR MENUS VTR MAIN MENU screen SUB menu VF display Remarks FUNCTION ENG Index for opening the FUNCTION screen. BATTERY/ TAPE ENG Index for opening the BATTERY/TAPE screen. BATTERY SETTING ENG Index for opening the BATTERY SETTING screen. VTR VF INDICATOR ENG Index for opening the VTR VF INDICATOR screen. MIC/AUDIO ENG Index for opening the MIC/AUDIO screen. TC/UB ENG Index for opening the TC/UB screen.
PAGE 32
03. 英(P89-127) MENU 05.5.18 10:44 ページ116 Setting menu screens VTR MAIN MENU FUNCTION screen The VTR’s functions are set on this screen. Variable range Item NEWS REC MODE OFF 0.2 : 2.0 VF display USER ENG C U F HUMID OPE ON OFF USER ENG C U F REC START ALL NORMAL USER ENG C U F PAUSE TIMER C U F RETAKE MODE C F Item For selecting the VTR START button acknowledgment time during recording.
PAGE 33
03. 英(P89-127) MENU 05.5.18 10:44 ページ117 Setting menu screens VTR MAIN MENU (continued) BATTERY/TAPE screen BATTERY/TAPE screen Select the settings which match the type of battery used on this screen. The warning tone which signals the remaining battery charge and remaining tape and which is heard during shooting can be switched off if they prove to be distracting.
PAGE 34
03. 英(P89-127) MENU 05.5.18 10:44 ページ118 Setting menu screens VTR MAIN MENU (continued) BATTERY SETTING screen MONITOR MARKER screen The type of battery to be used is selected and its settings are performed on this screen.
PAGE 35
03. 英(P89-127) MENU 05.5.18 10:44 ページ119 Setting menu screens VTR MAIN MENU (continued) VTR VF INDICATOR screen The information to be displayed in the viewfinder is set on this screen. Item TAPE (IND) Variable range VF display ON OFF USER ENG For switching the remaining tape display to ON or OFF. ON OFF USER ENG For switching the battery voltage display to ON or OFF. CH1 CH1•CH2 OFF USER ENG For selecting what the audio level meter is to display.
PAGE 36
03. 英(P89-127) MENU 05.5.18 10:44 ページ120 Setting menu screens VTR MAIN MENU (continued) MIC/AUDIO screen Item MIC LOWCUT CH1 Variable range VF display FRONT REAR F&R OFF USER ENG For setting the high-pass filter for the CH1 mic input. FRONT:The high-pass filter for the front mic input is set to ON. REAR: The high-pass filter for the rear mic input is set to ON. F&R: The high-pass filters for both the front and rear mic inputs are set to ON. OFF: The high-pass filter for the CH1 input is set to OFF.
PAGE 37
03. 英(P89-127) MENU 05.5.18 10:44 ページ121 Setting menu screens VTR MAIN MENU (continued) TC/UB screen The time code and user bits settings are performed on this screen. Item TC MODE Variable range DF NDF VF display USER ENG C U F UB MODE C U F USER DATE TIME EXT TCG USER ENG Remarks Item For setting the time code to the DF or NDF mode. DF : The time code is set to the drop frame mode. NDF : The time code is set to the non-drop frame mode.
PAGE 38
03. 英(P89-127) MENU 05.5.18 10:44 ページ122 Setting menu screens VTR MAIN MENU (continued) TC/UB screen The time code and user bits settings are performed on this screen. Item P. OFF LCD DISPLAY Variable range VF display ON OFF USER ENG For setting whether the LCD display is to appear when the power is OFF. ON : The LCD display appears even when the power is OFF. OFF : The LCD display does not appear when the power is OFF. The power-saving mode is established.
PAGE 39
03. 英(P89-127) MENU 05.5.18 10:44 ページ123 Setting menu screens VTR MAIN MENU (continued) TIME DATE screen VTR INITIALIZE screen The time/date settings are performed on this screen. The VTR MENU settings are initialized and the user data is saved on this screen. Item Variable range VF display Remarks YEAR 00—05—99 ENG For setting the year. MONTH 1 — 12 ENG For setting the month. DAY 1 — 31 ENG For setting the day. HOUR 0 — 23 ENG For setting the hours.
PAGE 40
03. 英(P89-127) MENU 05.5.18 10:44 ページ124 Setting menu screens VTR USER MENU SELECT ON (¢) or OFF (≥) is set on this screen to determine which items are to be registered on the USER MENU screen. The maximum number of VTR unit items which can be registered is 14. FUNCTION screen Item NEWS REC MODE Variable range VF display For setting the registration of the NEWS REC MODE item on the USER MENU screen.
PAGE 41
03. 英(P89-127) MENU 05.5.18 10:44 ページ125 Setting menu screens VTR USER MENU SELECT (continued) ON (¢) or OFF (≥) is set on this screen to determine which items are to be registered on the USER MENU screen. The maximum number of VTR unit items which can be registered is 14. VTR VF INDICATOR screen Item TAPE (IND) Variable range VF display ENG For setting the registration of the TAPE (VF INDICATOR) item on the USER MENU screen.