Panasonic Broadcast AJ-D455 Menu Information
Setup (default settings) The unit’s major settings are performed by making selections on menus. The setting menus appear on the TV monitor when the TV monitor and VIDEO OUT 3 connector in the unit's connector area are hooked up. The menus can be output to the SDI OUT 3 connector as well when the AJ-YA455P component serial interface board is used. Changing the settings 1 Press the MENU button. The setup menu appears on the TV monitor and setup menu No. appears on the counter display.
Setup menus This unit can store up to 5 user files (user 1 to user 5) containing different menu settings, and these files can be selected and used. Changing the file 1 2 Press the MENU button. Hold down the FILE button and press the cursor button file. Hold down the FILE button and press the cursor button user file. SYSTEM USER 1 USER 2 USER 3 to switch to the next user to switch to the previous USER 4 USER 5 USER FILE Each user file contains the following items.
Lock mode can be set to protect the settings in the system files and user files (USER2 – USER5). Settings can no longer be changed when this mode is set. To set and release the lock mode for the system files and user files use setup item No. 30 (MENU LOCK) and setup menu item No. A03 (MENU LOCK), respectively. Setting and releasing the lock mode. 1 2 Press the MENU button. 3 Press the or button and move the cursor ( ∗ ) on the menu screen to setup item No. 30 (MENU LOCK) or setup menu item No.
Setup menus The contents of the USER2 – USER5 files can be copied (loaded) into the USER1 file. In addition, the contents of the USER1 file can be copied (saved) to the USER2 – USER5 files. Load or save USER1 Load or save USER2 Settings can be locked. USER3 Settings can be locked. USER4 Settings can be locked. USER5 Settings can be locked. Load or save Load or save Loading a user file 1 2 Press the MENU button. 3 Press the or No. A00 (LOAD).
Saving a user file 1 2 Press the MENU button. 3 Press the or No. A01 (SAVE). While holding down the FILE button, press the or button, and select USER1. button and move the cursor ( ∗ ) on the menu screen to setup item SETUP-MENU MENU NO.A00 - 0000 723 DV PB ATT OFF A00 LOAD USER2 USER2 ∗A01 SAVE A02 P.ON LOAD OFF END 4 Press the or button and select the user file into which the USER1 contents are to be saved. User files which have been set to the lock mode are not displayed.
Setup menus SYSTEM menu Item No. Superimposed display Setting No. Description Superimposed display 00 SYS SC COAR. 0000 0001 0002 0003 0 90 180 270 System phase rough adjustment: 90° units If setting operation is performed, the setting value does not return to factory (default) setting. 01 SYS SC FINE 0000 .. . 0127 .. . 0255 –127 .. . .. 0 .
SYSTEM menu (continued) Item No. Setting Superimposed display No. Description Superimposed display 18 CHROMA LEVEL 0000 .. . 0127 .. . 0255 –127 .. . .. 0 . 128 For setting the chroma level. The maximum amount by which the level can be varied is from –3 to +3 dB. 21 SYS H OFFSET 0000 0001 0002 0003 0004 0005 0006 –3 –2 –1 0 4 5 6 For adjusting the system phase offset: 4.48 µs steps 0: –13.4 µs 1: –8.96 µs 2: –4.48 µs 3: 0 4: +4.48 µs 5: +8.96 µs 6: +13.
Setup menus USER menu Item No. * The SERIAL OUT 3 connector functions only when the AJ-YA455P serial interface board (optional accessory) is used. Superimposed display Setting No. Description Superimposed display 000 P-ROLL TIME 0000 .. . 0005 .. . 0015 0S .. . 5S .. . 15S This sets the preroll time which can be set from 0 to 15 seconds in 1-second increments.
USER menu (continued) Item Setting Description Superimposed display No. 005 TAPE TIMER 0000 0001 ±12h 24h 007 CHARA TYPE 0000 0001 WHITE W/OUT This selects the display type for the super display output to the VIDEO OUT 3/SERIAL OUT 3* connector as well as for displays such as the setting menu, etc. 0: White characters against a black background. 1: White characters with a black border.
Setup menus USER menu Item Setting Description No. Superimposed display 101 SHTL MAX 0000 0001 0002 ×16 ×32 ×60 This sets the maximum speed for shuttle operations. 0: 16× normal speed 1: 32× normal speed 2: 60× normal speed When a DV or DVCAM cassette is used, the 32× speed will be set even if “×60” has been selected as this item’s setting. 102 FF. REW MAX 0000 0001 0002 ×32 ×60 ×100 This sets the maximum speed for FF and REW operations.
USER menu (continued) Item Setting Description Superimposed display No. 113 MEMORY STOP 0000 0001 OFF ON This selects whether the VTR is to stop automatically when the counter value reaches “0” during a fast forwarding or rewinding operation in the CTL mode. 0: The VTR does not stop. 1: The VTR stops automatically. 1. The stop mode concerned is either the stop or the stillpicture mode depending on the setup menu No. 313 (AFTER CUE-UP) setting. 2.
Setup menus USER menu Item Setting Description No. Superimposed display 201 9P SEL 0000 0001 OFF ON This selects whether the 9-Pin connector functions when the REMOTE/LOCAL switch has been set to REMOTE. 0: Do not function 1: Function 202 ID SEL 0000 0001 0002 OTHER DVCPRO ORIG This selects the ID information which is returned to the controller. 0: 20 25H 1: DVCPRO’s, own ID is returned (F0 33H). 2: The unit’s own ID (A0 3CH) is returned.
USER menu Item No. Superimposed display Setting No. Description Superimposed display 303 STD/ NON-STD 0000 0001 0002 AUTO STD N-STD This selects STD or NON-STD in accordance with the composite input signal. 0: Standard/non-standard signals are automatically identified and processed. 1: Standard signals are processed. (Forced STD) 2: Non-standard signals are processed. (Forced NON-STD) 304 SERVO REF 0000 0001 AUTO EXT This selects the video signal processing.
Setup menus USER menu (continued) Item No. Superimposed display Setting No. Description Superimposed display This selects the mode after cue-up operation is complete. 0: STOP mode 1: SHTL STILL mode 2: VAR STILL mode 313 AFTER CUE-UP 0000 0001 0002 STOP STILL1 STILL2 315 AUD MEM UNIT 0000 0001 0002 0003 OFF MODE1 MODE2 MODE3 This selects the connection with the AJ-YA752 audio memory unit.
USER menu (continued) Item No. Superimposed display Setting No. Description Superimposed display 320 JOG FWD MAX 0000 0001 0002 +4.1 +1.85 +1 This sets the maximum JOG FWD speed. 0: +4.1× (+3.1×) speed 1: +1.85× (+1.85×) speed 2: +1× (+1×) speed • The speeds in parentheses apply when a DV or DVCAM cassette is used. • At any speed setting other than 0 (+4.1×), the phase cannot be synchronized from an editing controller which synchronizes the phase using the JOG command.
Setup menus USER menu Item No. Superimposed display Setting No. Description Superimposed display 400 STILL TIMER 0000 0001 0002 0003 0004 0005 0006 0007 0008 0.5s 5s 10s 20s 30s 40s 50s 1min 2min This selects the length of time until tape protection mode is established when a DVCPRO tape is inserted and the unit is in STOP or STILL mode.
USER menu
Setup menus USER menu
USER menu
Setup menus USER menu
USER menu
Setup menus USER menu
USER menu
