Manual

Congratulations
on your purchase of one of the most
sophisticated and reliable products on the
market today. Used properly, it will bring you
years of enjoyment. Please fill in the information
below. The serial number is on the tag located
on the back of your DECK.
• Date of Purchase
• Dealer Purchased From
• Dealer Address
• Dealer Phone No.
• Model No. AG-VP310
• Serial No.
A . • .
[] Remote Control [] Batteries 2 "AA"
EUR7724KD0
_CCCC)
[] RF Coaxial Cable
LSJA0418
eoo e " ". " "
jJ 1) Open cover.
2) Insert batteries as
_ marked.
3) Close cover.
[] Battery replacement caution
• Do not mix old and new batteries.
• Do not mix alkaline with manganese batteries.
Only use tapes with the _ mark in this DECK.
Tape Speed Type of Video Cassette
Setting T120 T160 T180
SP 2 Hours
Standard Play) 2 Hours 40 Minutes 3 Hours
SLP
(Super Long Play) 6 Hours 8 Hours 9 Hours
4
Playing older or damaged tapes may eventually
cause video heads to become clogged.
Video Head Clog Sensor _:
VIDEO HFJ_DS MAy
During playback, this screen NEE°O_EA,_,G
PL£ASE INSERT HEAD
appears if clogging is detected. CL_,_,GOASSETTE
TO remove screen, press PLAY
on the remote or DECK.
• Use "dry" type head cleaning cassette only.
(Part No. NV-TCL30PT is recommended.)
• Follow cleaning tape instructions carefully.
Excessive use of tape can shorten head life.
A clean video head helps produce a clear picture.
So, we have equipped your DECK with a builtqn, non-
chemical head cleaning system that helps prevent
clogging of the video heads. Cleaning is performed
each time you load or unload a video cassette.
• This feature is preventative only, If your video
heads are seriously clogged, consider the use of a
chemical non-abrasive head cleaning kit.
Use a soft cloth or dusting attachment of a vacuum
cleaner to remove dust from the ventilation holes on
the back sides and bottom of the cabinet. Plastic
surfaces are easily scratched and can be marred by
alcohol and various solvents. Avoid excessive use of
oil-based furniture polishes since the materials used in
the cabinet will accumulate more dust. We recommend
using a non-abrasive, antistatic cleaner and polisher.
Digital Auto Picture
Automatically controls the video output signal for
less noise depending on the tape condition.
Digital Auto Tracking
Continuously analyzes the signal and adjusts for
optimum picture quality.
Manual Tracking Control
(to reduce picture noise)
Use during Playback and Slow Motion mode to
reduce picture noise.
Press CH (TRACKING) A/V on the remote control
or on DECK until the picture clears up.
To return to Auto Tracking, press POWER off, then
on again a few seconds later.
V-Lock Control (to reduce picture jitter)
In Still mode, CH (TRACKING) A/V operate as a
V-Lock control.