Manual

Connection
Make the Audio/Video Connection as shown on pp. 12 - 15.
• You can use TV connected to a Stereo amplifier and speakers instead of Stereo TV.
The following are possible audio broadcast types and on-
screen displays.
The signal being received is indicated with a "[c_"mark while
the selected audio mode is indicated with an arrow.
To display the broadcast signal being received,
-_ press DISPLAY*.
MTS Stereo and SAP broadcast
Multi-channel Television Sound
Stereo (main language) and
Secondary Audio Program (sub
language) broadcasts are being
received simultaneously.
Select STEREO or SAP audio mode.
ISTOP,2:0+OR!!1
0:00:
II+STEREO •
'_o%
MTS Stereo broadcast
Multi-channel Television Sound
Stereo broadcast. Select STEREO
audio mode.
• If stereo broadcast is weak and
display flickers, select MONO audio
mode for possible better results.
STOP,+:0+OR_;/s_ o:oo:
((<STEREO •
O
7>-IO
®@®
@@0® j
,ca _ Dva
o++;o
AUDIO
(SAP/Hi-Fi)
DISPLAY
SAP broadcast
Secondary Audio Program (sub
language) broadcast. Select SAP
audio mode for the sub language.
MONO broadcast
Normal monaural sound broadcast.
stoP,2:o+CRii1
0:00:
STEREO
[<SAP •
MONO
STOP 12:00AM CH 02
0:00:00
STEREO SP
SAP
MONO •
Equipped with dlox*-TV
Noise Reduction for
true MTS reproduction.
dbx®-TV Noise
Reduction is required
for good stereo
separation and audio
fidelity, dl_x_is a
registered trademark,
and is licensed by cllox*
Technology Licensing.
26