Panasonic Broadcast AG-MX70 Menu Information
[Setup] initial setting screen Wash Pb 128 Pr 128 Y 196 Event 00E ME Time Pattern INT 10:00F 3015 Wht Setup Power Reset Direct Pattern Setup Audio Input Video Setup Memory INT V Title 15 Gen Ref In Lock Video Format System1 G/L Scrolled display 15 H Phase SC Phase 128 512 Aspect NTSC Setup 4:3 Dly Time GPI 1Frame Sec System2 Lcd Stby Bus Type ME VBClean DR 0 Off Still RS422 GVG Chr.
[Setup] initial setting screen [Power] (power ON) setting R1 R2 R3 R4 R5 Whether the system is to be started from the [Reset] status, Power from the [Preset] status or in the [Demo] mode can be Reset selected using the rotary 2 control. With [Reset], the settings except for the event memories, Reset setup settings, file memory and key learn settings are Preset initialized.
[Setup] initial setting screen The LCD display now shows the setting screens for each effect pattern. Proceed to set the edges and effects, and if the settings are acceptable, enter them using [Enter], and return to the direct pattern settings. Example of transition Pos.
[Setup] initial setting screen [Audio Video Input] settings These are used to set the audio and video inputs. When [Setup] is selected using the rotary 2 control and [Enter] is pressed, [OK?] appears so press [Enter] to change to the setting mode. Use [Shift] + [Enter] to cancel. When [Default] is selected using the rotary 2 control and [Enter] is pressed, [OK?] appears so press [Enter] to change to the default setting.
[Setup] initial setting screen [Memory] setting R1 This is used to set the memories used for INTVideo and DSK. When the setting is changed, all the memories are cleared. How much memory is to be used for [INT V] and how much for [Title] for DSK and TitleKey is set using the rotary 2 and 3 controls. If the allocation to one memory is changed, the allocation to the other memory will change so that the total remains 30. When a change is to be made, [OK?] appears.
[Setup] initial setting screen [System1] setting R1 R2 R3 R4 R5 This is used to perform a variety of settings. System1 Dly Time GPI RS422 The rotary 2 control is used to set the amount of delay for 1Frame Sec ME GVG the source input when the [AdvRef] advanced reference signal is connected with the 3D optional board (AG-VE70) ME 1Frame Sec GVG installed. If 0Frame is selected, the video delay amount is DSK 0Frame Frame SONY different between when the 3D effects are applied and when Fade they are not.
[Setup] initial setting screen [Audio Level] setting R1 The [Alignment] (alignment) level is set using the rotary 2 control. [–3 dB], [0 dB] or [4 dB] can be selected. The default setting is [4 dB] for NTSC and [0 dB] for PAL. The [Head] (headroom) is set using the rotary 5 control. Either [18 dB] or [20 dB] can be selected. The default setting is [20 dB] for NTSC and [18 dB] for PAL.
Other settings Event memory Setting method Event 00E One hundred panel statuses can be stored in event memories 0 to 99. Press the Set button, set the event number using the number keys, and enter the setting using [Enter]. Set button: Its lamp lights during the setting process. When [Enter] is pressed, it flashes for two seconds and then goes off. When the setting is in progress, Event is displayed in reverse video, and the event is then entered using [Enter].
Other settings Transition time setting Select the item to be set, and press the [ME], [DSK] or [FADE] button. Input the numerical value using the number keys, and press [Enter]. The numerical value can be incremented and decremented using rotary TIME or the “+” and “–” keys. Set the ME (back, key transition), DSK or Mod i f yfade time. Set the time of the item selected for ME, DSK or Fade above the number keys. The time is indicated on the LCD display. It can also be input or output using the number keys.
