Panasonic Broadcast AG-DVX100B Menu Information
Using the setup menus Use the setup menus to change the settings to suit the scenes you are shooting or what you are recording. You can also use the menu buttons on the remote control. (Page 19) 3 Example: Using the setup menus OPERATION lever MENU button 4 CAMERA MENU 1 . SCENE FILE 2 3 4 5 6 7 . CAMERA SETUP . SW MODE . AUTO SW . RECORDING SETUP . DISPLAY SETUP .
Press the OPERATION lever (h) (or move it y), then move it e or r to select the setting you want to change. To change a setting, move [q], then move the OPERATION lever e or r. Example: 6 To change other settings, repeat steps 4 and 5. When you have finished, press the MENU button to return to the function screen.
Setup menu structure Camera mode menu CAMERA MENU SCENE FILE (Pages 69 and 70) CAMERA SETUP (Page 71) SYNCRO SCAN ASPECT CONV COLOR BAR SETUP SW MODE (Pages 71 and 72) AUTO SW (Page 72) A.IRIS AGC ATW AF MID GAIN HIGH GAIN ATW HANDLE ZOOM IRIS DIAL USER1 USER2 USER3 RECORDING SETUP (Pages 74 and 75) DISPLAY SETUP (Page 76) OTHER FUNCTIONS (Pages 77 and 78) REMOTE DV CONTROL DV CMD SEL END SEARCH REC LAMP BEEP SOUND CLOCK SET TIME SHIFT POWER SAVE LANGUAGE H.
Setup menu list SCENE FILE screen Description of settings DETAIL LEVEL Adjusts the amount of detail. (camera) -7 - 0 - +7 V DETAIL LEVEL (camera) Adjusts the level of outline correction in vertical screen. -7 - 0 - +7 DETAIL CORING (camera) Adjusts the level of removing noises of the detail signal. -7 - 0 - +7 Set to - for a clearer image. Noise increases slightly. Set to + to decrease noise. CHROMA LEVEL (camera) Adjusts chroma level. -7 - 0 - +7 CHROMA PHASE (camera) Finely adjusts chroma phase.
Setup menu list (continued) SCENE FILE screen Item/ (Display mode) MATRIX (camera) 70 Description of settings Chooses a MATRIX table, and sets the color for shooting. NORM: Makes colors suitable for a shooting in the open air or in using a halogen lamp as the source of light. ENRICHED: Makes colors brighter than the NORM1 mode. FLOU: Makes colors suitable for shooting indoors under fluorescent lights. CINE-LIKE: Makes colors suitable for movie-like shooting.
Item/ (Display mode) Description of settings SYNCRO SCAN Adjusts the synchro scan shutter speed used for shooting images on a (camera) TV screen, etc. If you move and hold the OPERATION to e or r, changing speeds up and a beep sounds. • PROGRESSIVE MODE OFF: 1/60.3 1/250.0 • PROGRESSIVE MODE 30P: 1/30.1 1/48.0 1/250.0 • PROGRESSIVE MODE 24P/24PA: 1/24.1 1/48.0 1/250.0 SW MODE screen Item/ (Display mode) MID GAIN (camera) Sets the gain value which is to be allocated to the M position of GAIN switch.
Setup menu list (continued) SW MODE screen Item/ (Display mode) USER1 (camera) Description of settings Enables a function to be allocated to the USER1 button. COLOR BAR: Color bar display (Page 35) SPOTLIGHT: Sets the auto iris control for the spotlight to ON or OFF.
PLAYBACK FUNCTIONS screen Item/ (Display mode) 32K (12bit) AUDIO (VCR) Item/ (Display mode) Description of settings AUDIO OUT (VCR) Sets the sound to be output as CH1 and CH2 signals when playing back a tape that was recorded in the 32K (12bit) audio mode. ST1: Selects the sound that was recorded during shooting. CH1 signals = CH1 track CH2 signals = CH2 track ST2: Selects the sound that was dubbed on the recording.
Setup menu list (continued) RECORDING SETUP screen Item/ (Display mode) Description of settings REC SPEED (camera) (VCR) Set the recording-time mode. SP: SP (standard) mode LP: LP (long) mode AUDIO REC (camera) (VCR) Set the audio recording mode for conversion to PCM audio. 32K (12bit): 12bit/21kHz 48K (16bit): 16bit/48kHz MIC ALC (camera) Sets microphone level auto control to ON or OFF. ON OFF Set this ON to reduce distortion at high input levels.
RECORDING SETUP screen (continued) Item/ (Display mode) UB MODE (camera) (VCR) Description of settings Set the information you want for user information. USER: Records user information. TIME: Records the current time. DATE: Records the current date. TCG: Records the data from the time code generator. FRM. RATE: Records the frame conversion frame rate. a b c d Item/ (Display mode) Description of settings UB PRESET (camera) (VCR) Set user information. Make sure you have set USER in UB MODE.
Setup menu list (continued) DISPLAY SETUP screen Item/ (Display mode) Description of settings ZEBRA DETECT 1 (camera) Sets the brightness level of the leftleaning zebra patterns on the screen. 80%, 85%, 90%, 95%, 100%, 105% ZEBRA DETECT 2 (camera) Sets the brightness level of the rightleaning zebra patterns on the screen. 80%, 85%, 90%, 95%, 100%, 105%, OFF Note The zebra patterns do not appear if you select OFF. MARKER (camera) Select ON to display the marker.
OTHER FUNCTIONS screen Description of settings REMOTE (camera) (VCR) Sets the operations of the supplied remote control unit. (For settings on the remote control (Page 20) VCR1: Accepts commands from a remote control set to VCR1. VCR2: Accepts commands from a remote control set to VCR2. OFF: Operations are not accepted from any remote control. DV CONTROL (camera) Sets the control method for backup recording with a backup unit connected to the DV connector. OFF: The backup unit is not controlled.
Setup menu list (continued) OTHER FUNCTIONS screen Item/ (Display mode) POWER SAVE (camera) 78 Description of settings Select the power saving mode. When you don’t perform any specified operations for five minutes* ON: the camera recorder turns off automatically. OFF: the cylinder head pauses and goes into standby mode without cutting the power. *The camera recorder does not go into power save mode if you use the following controls. • AUTO Button • FOCUS switch • PUSH AUTO button • GAIN switch.
